From 8e0df066ffc40fde4cf43014114f8e472b8b9bd6 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 12 Nov 2014 22:42:23 -0700 Subject: x86: ivybridge: Add early init for PCH devices Many PCH devices are hard-coded to a particular PCI address. Set these up early in case they are needed. Signed-off-by: Simon Glass --- arch/x86/cpu/ivybridge/Makefile | 1 + arch/x86/cpu/ivybridge/cpu.c | 141 +++++++++++++++++++++++++++++++++++ arch/x86/cpu/ivybridge/early_init.c | 145 ++++++++++++++++++++++++++++++++++++ 3 files changed, 287 insertions(+) create mode 100644 arch/x86/cpu/ivybridge/early_init.c (limited to 'arch/x86/cpu') diff --git a/arch/x86/cpu/ivybridge/Makefile b/arch/x86/cpu/ivybridge/Makefile index 74f01e87bd..e5c0751e65 100644 --- a/arch/x86/cpu/ivybridge/Makefile +++ b/arch/x86/cpu/ivybridge/Makefile @@ -6,6 +6,7 @@ obj-y += car.o obj-y += cpu.o +obj-y += early_init.o obj-y += lpc.o obj-y += microcode_intel.o obj-y += pci.o diff --git a/arch/x86/cpu/ivybridge/cpu.c b/arch/x86/cpu/ivybridge/cpu.c index 0aca2f02a7..d5be2f587f 100644 --- a/arch/x86/cpu/ivybridge/cpu.c +++ b/arch/x86/cpu/ivybridge/cpu.c @@ -4,6 +4,7 @@ * Graeme Russ, graeme.russ@gmail.com. * * Some portions from coreboot src/mainboard/google/link/romstage.c + * and src/cpu/intel/model_206ax/bootblock.c * Copyright (C) 2007-2010 coresystems GmbH * Copyright (C) 2011 Google Inc. * @@ -23,6 +24,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -180,6 +182,83 @@ int arch_cpu_init(void) return 0; } +static int enable_smbus(void) +{ + pci_dev_t dev; + uint16_t value; + + /* Set the SMBus device statically. */ + dev = PCI_BDF(0x0, 0x1f, 0x3); + + /* Check to make sure we've got the right device. */ + value = pci_read_config16(dev, 0x0); + if (value != 0x8086) { + printf("SMBus controller not found\n"); + return -ENOSYS; + } + + /* Set SMBus I/O base. */ + pci_write_config32(dev, SMB_BASE, + SMBUS_IO_BASE | PCI_BASE_ADDRESS_SPACE_IO); + + /* Set SMBus enable. */ + pci_write_config8(dev, HOSTC, HST_EN); + + /* Set SMBus I/O space enable. */ + pci_write_config16(dev, PCI_COMMAND, PCI_COMMAND_IO); + + /* Disable interrupt generation. */ + outb(0, SMBUS_IO_BASE + SMBHSTCTL); + + /* Clear any lingering errors, so transactions can run. */ + outb(inb(SMBUS_IO_BASE + SMBHSTSTAT), SMBUS_IO_BASE + SMBHSTSTAT); + debug("SMBus controller enabled\n"); + + return 0; +} + +#define PCH_EHCI0_TEMP_BAR0 0xe8000000 +#define PCH_EHCI1_TEMP_BAR0 0xe8000400 +#define PCH_XHCI_TEMP_BAR0 0xe8001000 + +/* + * Setup USB controller MMIO BAR to prevent the reference code from + * resetting the controller. + * + * The BAR will be re-assigned during device enumeration so these are only + * temporary. + * + * This is used to speed up the resume path. + */ +static void enable_usb_bar(void) +{ + pci_dev_t usb0 = PCH_EHCI1_DEV; + pci_dev_t usb1 = PCH_EHCI2_DEV; + pci_dev_t usb3 = PCH_XHCI_DEV; + u32 cmd; + + /* USB Controller 1 */ + pci_write_config32(usb0, PCI_BASE_ADDRESS_0, + PCH_EHCI0_TEMP_BAR0); + cmd = pci_read_config32(usb0, PCI_COMMAND); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config32(usb0, PCI_COMMAND, cmd); + + /* USB Controller 1 */ + pci_write_config32(usb1, PCI_BASE_ADDRESS_0, + PCH_EHCI1_TEMP_BAR0); + cmd = pci_read_config32(usb1, PCI_COMMAND); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config32(usb1, PCI_COMMAND, cmd); + + /* USB3 Controller */ + pci_write_config32(usb3, PCI_BASE_ADDRESS_0, + PCH_XHCI_TEMP_BAR0); + cmd = pci_read_config32(usb3, PCI_COMMAND); + cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_write_config32(usb3, PCI_COMMAND, cmd); +} + static int report_bist_failure(void) { if (gd->arch.bist != 0) { @@ -192,8 +271,11 @@ static int report_bist_failure(void) int print_cpuinfo(void) { + enum pei_boot_mode_t boot_mode = PEI_BOOT_NONE; char processor_name[CPU_MAX_NAME_LEN]; const char *name; + uint32_t pm1_cnt; + uint16_t pm1_sts; int ret; /* Halt if there was a built in self test failure */ @@ -205,9 +287,68 @@ int print_cpuinfo(void) if (ret && ret != -ENOENT && ret != -EEXIST) return ret; + /* Enable upper 128bytes of CMOS */ + writel(1 << 2, RCB_REG(RC)); + + /* TODO: cmos_post_init() */ + if (readl(MCHBAR_REG(SSKPD)) == 0xCAFE) { + debug("soft reset detected\n"); + boot_mode = PEI_BOOT_SOFT_RESET; + + /* System is not happy after keyboard reset... */ + debug("Issuing CF9 warm reset\n"); + outb(0x6, 0xcf9); + cpu_hlt(); + } + + /* Early chipset init required before RAM init can work */ + sandybridge_early_init(SANDYBRIDGE_MOBILE); + + /* Check PM1_STS[15] to see if we are waking from Sx */ + pm1_sts = inw(DEFAULT_PMBASE + PM1_STS); + + /* Read PM1_CNT[12:10] to determine which Sx state */ + pm1_cnt = inl(DEFAULT_PMBASE + PM1_CNT); + + if ((pm1_sts & WAK_STS) && ((pm1_cnt >> 10) & 7) == 5) { +#if CONFIG_HAVE_ACPI_RESUME + debug("Resume from S3 detected.\n"); + boot_mode = PEI_BOOT_RESUME; + /* Clear SLP_TYPE. This will break stage2 but + * we care for that when we get there. + */ + outl(pm1_cnt & ~(7 << 10), DEFAULT_PMBASE + PM1_CNT); +#else + debug("Resume from S3 detected, but disabled.\n"); +#endif + } else { + /* + * TODO: An indication of life might be possible here (e.g. + * keyboard light) + */ + } + post_code(POST_EARLY_INIT); + + /* Enable SPD ROMs and DDR-III DRAM */ + ret = enable_smbus(); + if (ret) + return ret; + + /* Prepare USB controller early in S3 resume */ + if (boot_mode == PEI_BOOT_RESUME) + enable_usb_bar(); + + gd->arch.pei_boot_mode = boot_mode; + + /* TODO: Move this to the board or driver */ + pci_write_config32(PCH_LPC_DEV, GPIO_BASE, DEFAULT_GPIOBASE | 1); + pci_write_config32(PCH_LPC_DEV, GPIO_CNTL, 0x10); + /* Print processor name */ name = cpu_get_name(processor_name); printf("CPU: %s\n", name); + post_code(POST_CPU_INFO); + return 0; } diff --git a/arch/x86/cpu/ivybridge/early_init.c b/arch/x86/cpu/ivybridge/early_init.c new file mode 100644 index 0000000000..eb8f6139fe --- /dev/null +++ b/arch/x86/cpu/ivybridge/early_init.c @@ -0,0 +1,145 @@ +/* + * From Coreboot + * + * Copyright (C) 2007-2010 coresystems GmbH + * Copyright (C) 2011 Google Inc + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +static void sandybridge_setup_bars(pci_dev_t pch_dev, pci_dev_t lpc_dev) +{ + /* Setting up Southbridge. In the northbridge code. */ + debug("Setting up static southbridge registers\n"); + pci_write_config32(lpc_dev, PCH_RCBA_BASE, DEFAULT_RCBA | 1); + + pci_write_config32(lpc_dev, PMBASE, DEFAULT_PMBASE | 1); + pci_write_config8(lpc_dev, ACPI_CNTL, 0x80); /* Enable ACPI BAR */ + + debug("Disabling watchdog reboot\n"); + setbits_le32(RCB_REG(GCS), 1 >> 5); /* No reset */ + outw(1 << 11, DEFAULT_PMBASE | 0x60 | 0x08); /* halt timer */ + + /* Set up all hardcoded northbridge BARs */ + debug("Setting up static registers\n"); + pci_write_config32(pch_dev, EPBAR, DEFAULT_EPBAR | 1); + pci_write_config32(pch_dev, EPBAR + 4, (0LL + DEFAULT_EPBAR) >> 32); + pci_write_config32(pch_dev, MCHBAR, DEFAULT_MCHBAR | 1); + pci_write_config32(pch_dev, MCHBAR + 4, (0LL + DEFAULT_MCHBAR) >> 32); + /* 64MB - busses 0-63 */ + pci_write_config32(pch_dev, PCIEXBAR, DEFAULT_PCIEXBAR | 5); + pci_write_config32(pch_dev, PCIEXBAR + 4, + (0LL + DEFAULT_PCIEXBAR) >> 32); + pci_write_config32(pch_dev, DMIBAR, DEFAULT_DMIBAR | 1); + pci_write_config32(pch_dev, DMIBAR + 4, (0LL + DEFAULT_DMIBAR) >> 32); + + /* Set C0000-FFFFF to access RAM on both reads and writes */ + pci_write_config8(pch_dev, PAM0, 0x30); + pci_write_config8(pch_dev, PAM1, 0x33); + pci_write_config8(pch_dev, PAM2, 0x33); + pci_write_config8(pch_dev, PAM3, 0x33); + pci_write_config8(pch_dev, PAM4, 0x33); + pci_write_config8(pch_dev, PAM5, 0x33); + pci_write_config8(pch_dev, PAM6, 0x33); +} + +static void sandybridge_setup_graphics(pci_dev_t pch_dev, pci_dev_t video_dev) +{ + u32 reg32; + u16 reg16; + u8 reg8; + + reg16 = pci_read_config16(video_dev, PCI_DEVICE_ID); + switch (reg16) { + case 0x0102: /* GT1 Desktop */ + case 0x0106: /* GT1 Mobile */ + case 0x010a: /* GT1 Server */ + case 0x0112: /* GT2 Desktop */ + case 0x0116: /* GT2 Mobile */ + case 0x0122: /* GT2 Desktop >=1.3GHz */ + case 0x0126: /* GT2 Mobile >=1.3GHz */ + case 0x0156: /* IvyBridge */ + case 0x0166: /* IvyBridge */ + break; + default: + debug("Graphics not supported by this CPU/chipset\n"); + return; + } + + debug("Initialising Graphics\n"); + + /* Setup IGD memory by setting GGC[7:3] = 1 for 32MB */ + reg16 = pci_read_config16(pch_dev, GGC); + reg16 &= ~0x00f8; + reg16 |= 1 << 3; + /* Program GTT memory by setting GGC[9:8] = 2MB */ + reg16 &= ~0x0300; + reg16 |= 2 << 8; + /* Enable VGA decode */ + reg16 &= ~0x0002; + pci_write_config16(pch_dev, GGC, reg16); + + /* Enable 256MB aperture */ + reg8 = pci_read_config8(video_dev, MSAC); + reg8 &= ~0x06; + reg8 |= 0x02; + pci_write_config8(video_dev, MSAC, reg8); + + /* Erratum workarounds */ + reg32 = readl(MCHBAR_REG(0x5f00)); + reg32 |= (1 << 9) | (1 << 10); + writel(reg32, MCHBAR_REG(0x5f00)); + + /* Enable SA Clock Gating */ + reg32 = readl(MCHBAR_REG(0x5f00)); + writel(reg32 | 1, MCHBAR_REG(0x5f00)); + + /* GPU RC6 workaround for sighting 366252 */ + reg32 = readl(MCHBAR_REG(0x5d14)); + reg32 |= (1 << 31); + writel(reg32, MCHBAR_REG(0x5d14)); + + /* VLW */ + reg32 = readl(MCHBAR_REG(0x6120)); + reg32 &= ~(1 << 0); + writel(reg32, MCHBAR_REG(0x6120)); + + reg32 = readl(MCHBAR_REG(0x5418)); + reg32 |= (1 << 4) | (1 << 5); + writel(reg32, MCHBAR_REG(0x5418)); +} + +void sandybridge_early_init(int chipset_type) +{ + pci_dev_t pch_dev = PCH_DEV; + pci_dev_t video_dev = PCH_VIDEO_DEV; + pci_dev_t lpc_dev = PCH_LPC_DEV; + u32 capid0_a; + u8 reg8; + + /* Device ID Override Enable should be done very early */ + capid0_a = pci_read_config32(pch_dev, 0xe4); + if (capid0_a & (1 << 10)) { + reg8 = pci_read_config8(pch_dev, 0xf3); + reg8 &= ~7; /* Clear 2:0 */ + + if (chipset_type == SANDYBRIDGE_MOBILE) + reg8 |= 1; /* Set bit 0 */ + + pci_write_config8(pch_dev, 0xf3, reg8); + } + + /* Setup all BARs required for early PCIe and raminit */ + sandybridge_setup_bars(pch_dev, lpc_dev); + + /* Device Enable */ + pci_write_config32(pch_dev, DEVEN, DEVEN_HOST | DEVEN_IGD); + + sandybridge_setup_graphics(pch_dev, video_dev); +} -- cgit