From e76cd5d4cf311da7d40adc5d6e9b425509cf0205 Mon Sep 17 00:00:00 2001
From: Andy Fleming <afleming@freescale.com>
Date: Tue, 23 Oct 2012 19:03:46 -0500
Subject: 8xxx: Change all 8*xx_DDR addresses to 8xxx

There were a number of shared files that were using
CONFIG_SYS_MPC85xx_DDR_ADDR, or CONFIG_SYS_MPC86xx_DDR_ADDR, and
several variants (DDR2, DDR3). A recent patchset added
85xx-specific ones to code which was used by 86xx systems.
After reviewing places where these constants were used, and
noting that the type definitions of the pointers assigned to
point to those addresses were the same, the cleanest approach
to fixing this problem was to unify the namespace for the
85xx, 83xx, and 86xx DDR address definitions.

This patch does:

s/CONFIG_SYS_MPC8.xx_DDR/CONFIG_SYS_MPC8xxx_DDR/g

All 85xx, 86xx, and 83xx have been built with this change.

Signed-off-by: Andy Fleming <afleming@freescale.com>
Tested-by: Andy Fleming <afleming@freescale.com>
Acked-by: Kim Phillips <kim.phillips@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/cpu.c           | 14 +++++++-------
 arch/powerpc/cpu/mpc85xx/ddr-gen1.c      |  4 ++--
 arch/powerpc/cpu/mpc85xx/ddr-gen2.c      |  9 +++------
 arch/powerpc/cpu/mpc85xx/ddr-gen3.c      | 14 +++++++-------
 arch/powerpc/cpu/mpc86xx/ddr-8641.c      |  4 ++--
 arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c | 10 +---------
 arch/powerpc/cpu/mpc8xxx/ddr/util.c      | 14 ++++----------
 arch/powerpc/include/asm/immap_83xx.h    |  6 +++---
 arch/powerpc/include/asm/immap_85xx.h    | 22 +++++++++++-----------
 arch/powerpc/include/asm/immap_86xx.h    |  8 ++++----
 10 files changed, 44 insertions(+), 61 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 78486aab85..9b9832cfc3 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -451,21 +451,21 @@ static void dump_spd_ddr_reg(void)
 	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 		switch (i) {
 		case 0:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 			break;
-#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 		case 1:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 			break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
 		case 2:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
 			break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
 		case 3:
-			ddr[i] = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR;
+			ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
 			break;
 #endif
 		default:
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
index 54437dd0cb..8a86819fb5 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen1.c
@@ -18,7 +18,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 			     unsigned int ctrl_num)
 {
 	unsigned int i;
-	volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+	volatile ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 
 	if (ctrl_num != 0) {
 		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
@@ -73,7 +73,7 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 void
 ddr_enable_ecc(unsigned int dram_size)
 {
-	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
 
 	dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size);
 
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
index 49000a19e8..a705862522 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen2.c
@@ -19,14 +19,11 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 			     unsigned int ctrl_num)
 {
 	unsigned int i;
-#ifdef CONFIG_MPC83xx
-	ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC83xx_DDR_ADDR;
-#else
-	ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
-#ifdef CONFIG_SYS_FSL_ERRATUM_NMG_DDR120
+	ccsr_ddr_t *ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+
+#if defined(CONFIG_SYS_FSL_ERRATUM_NMG_DDR120) && defined(CONFIG_MPC85xx)
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	uint svr;
-#endif
 #endif
 
 	if (ctrl_num) {
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index f118dd5daf..ef0dd1da64 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -32,21 +32,21 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 
 	switch (ctrl_num) {
 	case 0:
-		ddr = (void *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 		break;
-#if defined(CONFIG_SYS_MPC85xx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
 	case 1:
-		ddr = (void *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 		break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
 	case 2:
-		ddr = (void *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
 		break;
 #endif
-#if defined(CONFIG_SYS_MPC85xx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
 	case 3:
-		ddr = (void *)CONFIG_SYS_MPC85xx_DDR4_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
 		break;
 #endif
 	default:
diff --git a/arch/powerpc/cpu/mpc86xx/ddr-8641.c b/arch/powerpc/cpu/mpc86xx/ddr-8641.c
index b8f2c9387f..92ba26dc8e 100644
--- a/arch/powerpc/cpu/mpc86xx/ddr-8641.c
+++ b/arch/powerpc/cpu/mpc86xx/ddr-8641.c
@@ -22,10 +22,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 
 	switch (ctrl_num) {
 	case 0:
-		ddr = (void *)CONFIG_SYS_MPC86xx_DDR_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
 		break;
 	case 1:
-		ddr = (void *)CONFIG_SYS_MPC86xx_DDR2_ADDR;
+		ddr = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 		break;
 	default:
 		printf("%s unexpected ctrl_num = %u\n", __FUNCTION__, ctrl_num);
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index 088cc0e855..8016bcdc22 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -18,15 +18,7 @@
 
 #include "ddr.h"
 
-#ifdef CONFIG_MPC83xx
-	#define _DDR_ADDR CONFIG_SYS_MPC83xx_DDR_ADDR
-#elif defined(CONFIG_MPC85xx)
-	#define _DDR_ADDR CONFIG_SYS_MPC85xx_DDR_ADDR
-#elif defined(CONFIG_MPC86xx)
-	#define _DDR_ADDR CONFIG_SYS_MPC86xx_DDR_ADDR
-#else
-	#error "Undefined _DDR_ADDR"
-#endif
+#define _DDR_ADDR CONFIG_SYS_MPC8xxx_DDR_ADDR
 
 static u32 fsl_ddr_get_version(void)
 {
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index 940ffff773..acfe1f095f 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -133,14 +133,8 @@ u32 fsl_ddr_get_intl3r(void)
 
 void board_add_ram_info(int use_default)
 {
-#if defined(CONFIG_MPC83xx)
-	immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	ccsr_ddr_t *ddr = (void *)&immap->ddr;
-#elif defined(CONFIG_MPC85xx)
-	ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-#elif defined(CONFIG_MPC86xx)
-	ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC86xx_DDR_ADDR);
-#endif
+	ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
+
 #if	defined(CONFIG_E6500) && (CONFIG_NUM_DDR_CONTROLLERS == 3)
 	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
 #endif
@@ -152,13 +146,13 @@ void board_add_ram_info(int use_default)
 
 #if CONFIG_NUM_DDR_CONTROLLERS >= 2
 	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
-		ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+		ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
 		sdram_cfg = in_be32(&ddr->sdram_cfg);
 	}
 #endif
 #if CONFIG_NUM_DDR_CONTROLLERS >= 3
 	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
-		ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+		ddr = (void __iomem *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
 		sdram_cfg = in_be32(&ddr->sdram_cfg);
 	}
 #endif
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index 679832cd6c..8ac13fc05c 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -1035,9 +1035,9 @@ typedef struct immap {
 } immap_t;
 #endif
 
-#define CONFIG_SYS_MPC83xx_DDR_OFFSET	(0x2000)
-#define CONFIG_SYS_MPC83xx_DDR_ADDR \
-			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DDR_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET	(0x2000)
+#define CONFIG_SYS_MPC8xxx_DDR_ADDR \
+			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
 #define CONFIG_SYS_MPC83xx_DMA_OFFSET	(0x8000)
 #define CONFIG_SYS_MPC83xx_DMA_ADDR \
 			(CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET)
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 969f726c36..54aa71b92b 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2867,9 +2867,9 @@ struct ccsr_pman {
 #define CONFIG_SYS_FSL_CORENET_PMAN2_OFFSET	0x5000
 #define CONFIG_SYS_FSL_CORENET_PMAN3_OFFSET	0x6000
 #endif
-#define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x8000
-#define CONFIG_SYS_MPC85xx_DDR2_OFFSET		0x9000
-#define CONFIG_SYS_MPC85xx_DDR3_OFFSET		0xA000
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET		0x8000
+#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET		0x9000
+#define CONFIG_SYS_MPC8xxx_DDR3_OFFSET		0xA000
 #define CONFIG_SYS_FSL_CORENET_CLK_OFFSET	0xE1000
 #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET	0xE2000
 #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET	0xEA000
@@ -2929,9 +2929,9 @@ struct ccsr_pman {
 #define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET	0xC20000
 #else
 #define CONFIG_SYS_MPC85xx_ECM_OFFSET		0x0000
-#define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x2000
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET		0x2000
 #define CONFIG_SYS_MPC85xx_LBC_OFFSET		0x5000
-#define CONFIG_SYS_MPC85xx_DDR2_OFFSET		0x6000
+#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET		0x6000
 #define CONFIG_SYS_MPC85xx_ESPI_OFFSET		0x7000
 #define CONFIG_SYS_MPC85xx_PCI1_OFFSET		0x8000
 #define CONFIG_SYS_MPC85xx_PCIX_OFFSET		0x8000
@@ -2998,12 +2998,12 @@ struct ccsr_pman {
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_RCPM_OFFSET)
 #define CONFIG_SYS_MPC85xx_ECM_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_ECM_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR_ADDR \
-	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR2_ADDR \
-	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR2_OFFSET)
-#define CONFIG_SYS_MPC85xx_DDR3_ADDR \
-	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_DDR3_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR2_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR3_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR3_OFFSET)
 #define CONFIG_SYS_LBC_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_LBC_OFFSET)
 #define CONFIG_SYS_IFC_ADDR \
diff --git a/arch/powerpc/include/asm/immap_86xx.h b/arch/powerpc/include/asm/immap_86xx.h
index cc338e4739..2a704fe6b7 100644
--- a/arch/powerpc/include/asm/immap_86xx.h
+++ b/arch/powerpc/include/asm/immap_86xx.h
@@ -1252,10 +1252,10 @@ typedef struct immap {
 
 extern immap_t  *immr;
 
-#define CONFIG_SYS_MPC86xx_DDR_OFFSET	0x2000
-#define CONFIG_SYS_MPC86xx_DDR_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR_OFFSET)
-#define CONFIG_SYS_MPC86xx_DDR2_OFFSET	0x6000
-#define CONFIG_SYS_MPC86xx_DDR2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DDR2_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR_OFFSET	0x2000
+#define CONFIG_SYS_MPC8xxx_DDR_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR_OFFSET)
+#define CONFIG_SYS_MPC8xxx_DDR2_OFFSET	0x6000
+#define CONFIG_SYS_MPC8xxx_DDR2_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC8xxx_DDR2_OFFSET)
 #define CONFIG_SYS_MPC86xx_DMA_OFFSET	0x21000
 #define CONFIG_SYS_MPC86xx_DMA_ADDR	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC86xx_DMA_OFFSET)
 #define CONFIG_SYS_MPC86xx_PIC_OFFSET	0x40000
-- 
cgit 


From 1956e431f8b0d1f4731794d9969d8e98240fefb4 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Tue, 23 Oct 2012 10:48:09 +0000
Subject: powerpc/85xx/p5040: add CONFIG_SYS_PPC64, del
 CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC

The P5040 has an e5500 core, so CONFIG_SYS_PPC64 should be defined in
config_mpc85xx.h.  This macro was absent in the initial P5040 patch because
it crossed paths with the patch that introduced the macro.

Also delete CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC, since it's not used in the
upstream U-Boot.  It's a holdover from the SDK.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/include/asm/config_mpc85xx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 03baaee1b7..6666d3d283 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -449,6 +449,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
 
 #elif defined(CONFIG_PPC_P5040)
+#define CONFIG_SYS_PPC64
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1
 #define CONFIG_MAX_CPUS			4
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	3
@@ -472,7 +473,6 @@
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
 #define CONFIG_SYS_FSL_ERRATUM_A004699
-#define CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC
 #define CONFIG_SYS_FSL_ERRATUM_A004510
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x10
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
-- 
cgit 


From 0118033b6700fc96a84a8c0593af3cbe2f10a6dc Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Thu, 25 Oct 2012 12:40:00 +0000
Subject: powerpc/85xx: implement check for erratum A-004849 work-around

The work-around for erratum A-004849 ("CoreNet fabric (CCF) can exhibit a
deadlock under certain traffic patterns causing the system to hang") is
implemented via the PBI (pre-boot initialization code, typically attached
to the RCW binary).  This is because the work-around is easier to implement
in PBI than in U-Boot itself.

It is still useful, however, for the 'errata' command to tell us whether
the work-around has been applied.  For A-004849, we can do this by verifying
that the values in the specific registers that the work-around says to
update.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/cmd_errata.c     | 63 +++++++++++++++++++++++++++++++
 arch/powerpc/include/asm/config_mpc85xx.h |  3 ++
 2 files changed, 66 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 2be192d578..ccfad56caa 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -25,6 +25,65 @@
 #include <linux/compiler.h>
 #include <asm/processor.h>
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
+/*
+ * This work-around is implemented in PBI, so just check to see if the
+ * work-around was actually applied.  To do this, we check for specific data
+ * at specific addresses in DCSR.
+ *
+ * Array offsets[] contains a list of offsets within DCSR.  According to the
+ * erratum document, the value at each offset should be 2.
+ */
+static void check_erratum_a4849(uint32_t svr)
+{
+	void __iomem *dcsr = (void *)CONFIG_SYS_DCSRBAR + 0xb0000;
+	unsigned int i;
+
+#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
+	static const uint8_t offsets[] = {
+		0x50, 0x54, 0x58, 0x90, 0x94, 0x98
+	};
+#endif
+#ifdef CONFIG_PPC_P4080
+	static const uint8_t offsets[] = {
+		0x60, 0x64, 0x68, 0x6c, 0xa0, 0xa4, 0xa8, 0xac
+	};
+#endif
+	uint32_t x108; /* The value that should be at offset 0x108 */
+
+	for (i = 0; i < ARRAY_SIZE(offsets); i++) {
+		if (in_be32(dcsr + offsets[i]) != 2) {
+			printf("Work-around for Erratum A004849 is not enabled\n");
+			return;
+		}
+	}
+
+#if defined(CONFIG_PPC_P2041) || defined(CONFIG_PPC_P3041)
+	x108 = 0x12;
+#endif
+
+#ifdef CONFIG_PPC_P4080
+	/*
+	 * For P4080, the erratum document says that the value at offset 0x108
+	 * should be 0x12 on rev2, or 0x1c on rev3.
+	 */
+	if (SVR_MAJ(svr) == 2)
+		x108 = 0x12;
+	if (SVR_MAJ(svr) == 3)
+		x108 = 0x1c;
+#endif
+
+	if (in_be32(dcsr + 0x108) != x108) {
+		printf("Work-around for Erratum A004849 is not enabled\n");
+		return;
+	}
+
+	/* Everything matches, so the erratum work-around was applied */
+
+	printf("Work-around for Erratum A004849 enabled\n");
+}
+#endif
+
 static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
@@ -136,6 +195,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #endif
 #ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
 	puts("Work-around for Erratum A004934 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004849
+	/* This work-around is implemented in PBI, so just check for it */
+	check_erratum_a4849(svr);
 #endif
 	return 0;
 }
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 6666d3d283..61dd061427 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -343,6 +343,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2	0x11
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+#define CONFIG_SYS_FSL_ERRATUM_A004849
 
 #elif defined(CONFIG_PPC_P3041)
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1
@@ -375,6 +376,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2	0x11
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+#define CONFIG_SYS_FSL_ERRATUM_A004849
 
 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */
 #define CONFIG_SYS_FSL_QORIQ_CHASSIS1
@@ -417,6 +419,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x20
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+#define CONFIG_SYS_FSL_ERRATUM_A004849
 
 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
 #define CONFIG_SYS_PPC64		/* 64-bit core */
-- 
cgit 


From 2a5fcb835f6e976ed0eb34c413d40f2d4a5e8d1f Mon Sep 17 00:00:00 2001
From: York Sun <yorksun@freescale.com>
Date: Sun, 28 Oct 2012 08:12:54 +0000
Subject: powerpc/mpc85xx: Temporary fix for spin table backward compatibility

Once u-boot sets the spin table to cache-enabled memory, old kernel which
uses cache-inhibit mapping without coherence will not work properly. We
use this temporary fix until kernel has updated its spin table code.
For now this fix is activated by default. To disable this fix for new
kernel, set environmental variable "spin_table_compat=no". After kernel
has updated spin table code, this default shall be changed.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/cpu_init.c       | 12 +++++++++++
 arch/powerpc/cpu/mpc85xx/release.S        | 35 ++++++++++++++++++++++++++++++-
 arch/powerpc/include/asm/config_mpc85xx.h |  6 ++++++
 3 files changed, 52 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 705c16c558..9c1887f592 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -350,6 +350,10 @@ int cpu_init_r(void)
 #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 	struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
 #endif
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+	extern int spin_table_compat;
+	const char *spin;
+#endif
 
 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
 	defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
@@ -395,6 +399,14 @@ int cpu_init_r(void)
 	}
 #endif
 
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+	spin = getenv("spin_table_compat");
+	if (spin && (*spin == 'n'))
+		spin_table_compat = 0;
+	else
+		spin_table_compat = 1;
+#endif
+
 	puts ("L2:    ");
 
 #if defined(CONFIG_L2_CACHE)
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 4ba44a9028..1f76925dc1 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -351,6 +351,13 @@ __secondary_reset_vector:
 	.align L1_CACHE_SHIFT
 	.global __second_half_boot_page
 __second_half_boot_page:
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+	lis	r3,(spin_table_compat - __second_half_boot_page)@h
+	ori	r3,r3,(spin_table_compat - __second_half_boot_page)@l
+	add	r3,r3,r11 /* r11 has the address of __second_half_boot_page */
+	lwz	r14,0(r3)
+#endif
+
 #define EPAPR_MAGIC		0x45504150
 #define ENTRY_ADDR_UPPER	0
 #define ENTRY_ADDR_LOWER	4
@@ -383,7 +390,24 @@ __second_half_boot_page:
 	stw	r8,ENTRY_ADDR_LOWER(r10)
 
 	/* spin waiting for addr */
-3:	lwz	r4,ENTRY_ADDR_LOWER(r10)
+3:
+/*
+ * To comply with ePAPR 1.1, the spin table has been moved to cache-enabled
+ * memory. Old OS may not work with this change. A patch is waiting to be
+ * accepted for Linux kernel. Other OS needs similar fix to spin table.
+ * For OSes with old spin table code, we can enable this temporary fix by
+ * setting environmental variable "spin_table_compat". For new OSes, set
+ * "spin_table_compat=no". After Linux is fixed, we can remove this macro
+ * and related code. For now, it is enabled by default.
+ */
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+	cmpwi   r14,0
+	beq     4f
+	dcbf    0, r10
+	sync
+4:
+#endif
+	lwz	r4,ENTRY_ADDR_LOWER(r10)
 	andi.	r11,r4,1
 	bne	3b
 	isync
@@ -460,5 +484,14 @@ __second_half_boot_page:
 	.globl __spin_table
 __spin_table:
 	.space CONFIG_MAX_CPUS*ENTRY_SIZE
+
+#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+	.align L1_CACHE_SHIFT
+	.global spin_table_compat
+spin_table_compat:
+	.long	1
+
+#endif
+
 __spin_table_end:
 	.space 4096 - (__spin_table_end - __spin_table)
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 61dd061427..d1c1e0681a 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -27,6 +27,12 @@
 #error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
 #endif
 
+/*
+ * This macro should be removed when we no longer care about backwards
+ * compatibility with older operating systems.
+ */
+#define CONFIG_PPC_SPINTABLE_COMPATIBLE
+
 #define FSL_DDR_VER_4_7	47
 
 /* Number of TLB CAM entries we have on FSL Book-E chips */
-- 
cgit 


From 345d6efdc713334387bf07cd0c122b3b03d401b2 Mon Sep 17 00:00:00 2001
From: Kim Phillips <kim.phillips@freescale.com>
Date: Wed, 31 Oct 2012 11:09:26 +0000
Subject: powerpc/mpc8xxx: take fdt_fixup_crypto_node() off the checkstack list

by moving compat_strlist into the .bss section.

0xfe004d80 fdt_fixup_crypto_node [u-boot]:		264

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc8xxx/fdt.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 68db8e2448..1986fea030 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -217,7 +217,7 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd)
 #if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */
 void fdt_fixup_crypto_node(void *blob, int sec_rev)
 {
-	const struct sec_rev_prop {
+	static const struct sec_rev_prop {
 		u32 sec_rev;
 		u32 num_channels;
 		u32 channel_fifo_len;
@@ -232,8 +232,8 @@ void fdt_fixup_crypto_node(void *blob, int sec_rev)
 		{ 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
 		{ 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
 	};
-	char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
-			    sizeof("fsl,secX.Y")];
+	static char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
+				   sizeof("fsl,secX.Y")];
 	int crypto_node, sec_idx, err;
 	char *p;
 	u32 val;
-- 
cgit 


From d607b9684b188d020a00e9cfaa502b782f29d538 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Thu, 1 Nov 2012 08:20:23 +0000
Subject: powerpc/85xx: implement check for erratum A-004580 work-around

The work-around for erratum A-004580 ("Internal tracking loop can falsely
lock causing unrecoverable bit errors") is implemented via the PBI
(pre-boot initialization code, typically attached to the RCW binary).
This is because the work-around is easier to implement in PBI than in
U-Boot itself.

It is still useful, however, for the 'errata' command to tell us whether
the work-around has been applied.  For A-004580, we can do this by verifying
that the values in the specific registers that the work-around says to
update.

This change requires access to the SerDes lane sub-structure in
serdes_corenet_t, so we make it a named struct.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/cmd_errata.c     | 48 +++++++++++++++++++++++++++++++
 arch/powerpc/include/asm/config_mpc85xx.h |  1 +
 arch/powerpc/include/asm/immap_85xx.h     |  2 +-
 3 files changed, 50 insertions(+), 1 deletion(-)

(limited to 'arch')

diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index ccfad56caa..7d38e1c3a9 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -24,6 +24,7 @@
 #include <command.h>
 #include <linux/compiler.h>
 #include <asm/processor.h>
+#include "fsl_corenet_serdes.h"
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_A004849
 /*
@@ -84,6 +85,49 @@ static void check_erratum_a4849(uint32_t svr)
 }
 #endif
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
+/*
+ * This work-around is implemented in PBI, so just check to see if the
+ * work-around was actually applied.  To do this, we check for specific data
+ * at specific addresses in the SerDes register block.
+ *
+ * The work-around says that for each SerDes lane, write BnTTLCRy0 =
+ * 0x1B00_0001, Register 2 = 0x0088_0000, and Register 3 = 0x4000_0000.
+
+ */
+static void check_erratum_a4580(uint32_t svr)
+{
+	const serdes_corenet_t __iomem *srds_regs =
+		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+	unsigned int lane;
+
+	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+		if (serdes_lane_enabled(lane)) {
+			const struct serdes_lane __iomem *srds_lane =
+				&srds_regs->lane[serdes_get_lane_idx(lane)];
+
+			/*
+			 * Verify that the values we were supposed to write in
+			 * the PBI are actually there.  Also, the lower 15
+			 * bits of res4[3] should be the same as the upper 15
+			 * bits of res4[1].
+			 */
+			if ((in_be32(&srds_lane->ttlcr0) != 0x1b000001) ||
+			    (in_be32(&srds_lane->res4[1]) != 0x880000) ||
+			    (in_be32(&srds_lane->res4[3]) != 0x40000044)) {
+				printf("Work-around for Erratum A004580 is "
+				       "not enabled\n");
+				return;
+			}
+		}
+	}
+
+	/* Everything matches, so the erratum work-around was applied */
+
+	printf("Work-around for Erratum A004580 enabled\n");
+}
+#endif
+
 static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 #ifdef CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
@@ -199,6 +243,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifdef CONFIG_SYS_FSL_ERRATUM_A004849
 	/* This work-around is implemented in PBI, so just check for it */
 	check_erratum_a4849(svr);
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004580
+	/* This work-around is implemented in PBI, so just check for it */
+	check_erratum_a4580(svr);
 #endif
 	return 0;
 }
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index d1c1e0681a..1ccc5c54e2 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -426,6 +426,7 @@
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
 #define CONFIG_SYS_FSL_ERRATUM_A004849
+#define CONFIG_SYS_FSL_ERRATUM_A004580
 
 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
 #define CONFIG_SYS_PPC64		/* 64-bit core */
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 54aa71b92b..b61f592d2b 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2619,7 +2619,7 @@ typedef struct serdes_corenet {
 #define SRDS_PCCR2_RST_XGMII1		0x00800000
 #define SRDS_PCCR2_RST_XGMII2		0x00400000
 	u32	res5[197];
-	struct {
+	struct serdes_lane {
 		u32	gcr0;	/* General Control Register 0 */
 #define SRDS_GCR0_RRST			0x00400000
 #define SRDS_GCR0_1STLANE		0x00010000
-- 
cgit 


From 9760b274df8fdc5a6d124f3192535ebe281a78a6 Mon Sep 17 00:00:00 2001
From: Zang Roy-R61911 <tie-fei.zang@freescale.com>
Date: Mon, 26 Nov 2012 00:05:38 +0000
Subject: powerpc/corenet_ds: move SATA config to board configuration

board configuration file is included before asm/config_mpc85xx.h.
however, CONFIG_FSL_SATA_V2 is defined in asm/config_mpc85xx.h.
it will never take effective in the board configuration file for
this kind of code :

 #ifdef CONFIG_FSL_SATA_V2
 ...
 #endif

To solve this problem, move CONFIG_FSL_SATA_V2 to board
configuration header file.

This patch reverts Timur's
commit:3e0529f742e893653848494ffb9f7cd0d91304bf

Signed-off-by: Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/include/asm/config_mpc85xx.h | 7 -------
 1 file changed, 7 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 1ccc5c54e2..965d4312c7 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -137,7 +137,6 @@
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	3
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
@@ -181,7 +180,6 @@
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	2
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -194,7 +192,6 @@
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	3
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_NUM_DDR_CONTROLLERS	1
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
@@ -248,7 +245,6 @@
 #define CONFIG_SYS_PPC_E500_DEBUG_TLB	2
 #define CONFIG_TSECV2
 #define CONFIG_SYS_FSL_SEC_COMPAT	2
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
@@ -324,7 +320,6 @@
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
@@ -357,7 +352,6 @@
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
@@ -435,7 +429,6 @@
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
 #define CONFIG_SYS_FSL_SEC_COMPAT	4
-#define CONFIG_FSL_SATA_V2
 #define CONFIG_SYS_NUM_FMAN		1
 #define CONFIG_SYS_NUM_FM1_DTSEC	5
 #define CONFIG_SYS_NUM_FM1_10GEC	1
-- 
cgit 


From c0a4e6b889a702cc2c8375619ce7b093f6b3b1de Mon Sep 17 00:00:00 2001
From: Yuanquan Chen <B41889@freescale.com>
Date: Mon, 26 Nov 2012 23:49:45 +0000
Subject: powerpc/p4080ds: fix PCI-e x8 link training down failure

Due to SerDes configuration error, if we set the PCI-e controller link width
as x8 in RCW and add a narrower width(such as x4, x2 or x1) PCI-e device to
PCI-e slot, it fails to train down to the PCI-e device's link width. According
to p4080ds errata PCIe-A003, we reset the PCI-e controller link width to x4 in
u-boot. Then it can train down to x2 or x1 width to make the PCI-e link between
RC and EP.

Signed-off-by: Yuanquan Chen <B41889@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/cmd_errata.c     | 3 +++
 arch/powerpc/include/asm/config_mpc85xx.h | 1 +
 2 files changed, 4 insertions(+)

(limited to 'arch')

diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index 7d38e1c3a9..e5ecf5dae5 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -247,6 +247,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 #ifdef CONFIG_SYS_FSL_ERRATUM_A004580
 	/* This work-around is implemented in PBI, so just check for it */
 	check_erratum_a4580(svr);
+#endif
+#ifdef CONFIG_SYS_P4080_ERRATUM_PCIE_A003
+	puts("Work-around for Erratum PCIe-A003 enabled\n");
 #endif
 	return 0;
 }
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 965d4312c7..0b9638bcee 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -421,6 +421,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
 #define CONFIG_SYS_FSL_ERRATUM_A004849
 #define CONFIG_SYS_FSL_ERRATUM_A004580
+#define CONFIG_SYS_P4080_ERRATUM_PCIE_A003
 
 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
 #define CONFIG_SYS_PPC64		/* 64-bit core */
-- 
cgit 


From b25f6de7c03cfa8663439581c90d303588168a29 Mon Sep 17 00:00:00 2001
From: Timur Tabi <timur@freescale.com>
Date: Thu, 1 Nov 2012 08:20:22 +0000
Subject: powerpc/85xx: update the work-around for P4080 erratum SERDES-9

The documented work-around for P4080 erratum SERDES-9 has been updated.
It is now compatible with the work-around for erratum A-4580.

This requires adding a few bitfield macros for the BnTTLCRy0 register.

Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c | 20 +++++++++++++-------
 arch/powerpc/include/asm/immap_85xx.h         |  3 +++
 2 files changed, 16 insertions(+), 7 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 7f466ac6a9..5495dc59ee 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -714,9 +714,13 @@ void fsl_serdes_init(void)
 
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
 		/*
-		 * Set BnTTLCRy0[FLT_SEL] = 000011 and set BnTTLCRy0[17] = 1 for
-		 * each of the SerDes lanes selected as SGMII, XAUI, SRIO, or
-		 * AURORA before the device is initialized.
+		 * Set BnTTLCRy0[FLT_SEL] = 011011 and set BnTTLCRy0[31] = 1
+		 * for each of the SerDes lanes selected as SGMII, XAUI, SRIO,
+		 * or AURORA before the device is initialized.
+		 *
+		 * Note that this part of the SERDES-9 work-around is
+		 * redundant if the work-around for A-4580 has already been
+		 * applied via PBI.
 		 */
 		switch (lane_prtcl) {
 		case SGMII_FM1_DTSEC1:
@@ -733,10 +737,12 @@ void fsl_serdes_init(void)
 		case SRIO1:
 		case SRIO2:
 		case AURORA:
-			clrsetbits_be32(&srds_regs->lane[idx].ttlcr0,
-					SRDS_TTLCR0_FLT_SEL_MASK,
-					SRDS_TTLCR0_FLT_SEL_750PPM |
-					SRDS_TTLCR0_PM_DIS);
+			out_be32(&srds_regs->lane[idx].ttlcr0,
+				 SRDS_TTLCR0_FLT_SEL_KFR_26 |
+				 SRDS_TTLCR0_FLT_SEL_KPH_28 |
+				 SRDS_TTLCR0_FLT_SEL_750PPM |
+				 SRDS_TTLCR0_FREQOVD_EN);
+			break;
 		default:
 			break;
 		}
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index b61f592d2b..296b549779 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -2637,8 +2637,11 @@ typedef struct serdes_corenet {
 		u32	res3;
 		u32	ttlcr0;	/* Transition Tracking Loop Ctrl 0 */
 #define SRDS_TTLCR0_FLT_SEL_MASK	0x3f000000
+#define SRDS_TTLCR0_FLT_SEL_KFR_26	0x10000000
+#define SRDS_TTLCR0_FLT_SEL_KPH_28	0x08000000
 #define SRDS_TTLCR0_FLT_SEL_750PPM	0x03000000
 #define SRDS_TTLCR0_PM_DIS		0x00004000
+#define SRDS_TTLCR0_FREQOVD_EN		0x00000001
 		u32	res4[7];
 	} lane[24];
 	u32 res6[384];
-- 
cgit 


From afbfdf545090472b734367ac2c874bfbe8928790 Mon Sep 17 00:00:00 2001
From: York Sun <yorksun@freescale.com>
Date: Thu, 8 Nov 2012 12:33:39 +0000
Subject: powerpc/mpc85xx: Fix a bug introduced by
 CONFIG_PPC_SPINTABLE_COMPATIBLE

Fix a bug introduced by this patch
powerpc/mpc85xx: Temporary fix for spin table backward compatibility

Should have checked both CONFIG_PPC_SPINTABLE_COMPATIBLE and CONFIG_MP in
cpu_init.c.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
---
 arch/powerpc/cpu/mpc85xx/cpu_init.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'arch')

diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index 9c1887f592..d1155e8126 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -350,7 +350,7 @@ int cpu_init_r(void)
 #elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 	struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
 #endif
-#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
 	extern int spin_table_compat;
 	const char *spin;
 #endif
@@ -399,7 +399,7 @@ int cpu_init_r(void)
 	}
 #endif
 
-#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
 	spin = getenv("spin_table_compat");
 	if (spin && (*spin == 'n'))
 		spin_table_compat = 0;
-- 
cgit