From f9fc237f1f07d4e5ff7c9c2da39cabc8d3d7b339 Mon Sep 17 00:00:00 2001 From: Bastian Ruppert Date: Tue, 4 Oct 2011 23:43:28 +0000 Subject: Davinci: ea20: set console on UART0 Signed-off-by: Bastian Ruppert Signed-off-by: Stefano Babic CC: Sandeep Paulraj Signed-off-by: Sandeep Paulraj --- board/davinci/ea20/ea20.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'board/davinci') diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c index 9d0f71bc55..4e4107af3f 100644 --- a/board/davinci/ea20/ea20.c +++ b/board/davinci/ea20/ea20.c @@ -48,12 +48,12 @@ static const struct pinmux_config spi1_pins[] = { { pinmux(5), 1, 5 } }; -/* UART pin muxer settings */ +/* UART0 pin muxer settings */ static const struct pinmux_config uart_pins[] = { - { pinmux(0), 4, 6 }, - { pinmux(0), 4, 7 }, - { pinmux(4), 2, 4 }, - { pinmux(4), 2, 5 } + { pinmux(3), 2, 7 }, + { pinmux(3), 2, 6 }, + { pinmux(3), 2, 4 }, + { pinmux(3), 2, 5 } }; #ifdef CONFIG_DRIVER_TI_EMAC @@ -104,7 +104,7 @@ static const struct lpsc_resource lpsc[] = { { DAVINCI_LPSC_AEMIF }, /* NAND, NOR */ { DAVINCI_LPSC_SPI1 }, /* Serial Flash */ { DAVINCI_LPSC_EMAC }, /* image download */ - { DAVINCI_LPSC_UART2 }, /* console */ + { DAVINCI_LPSC_UART0 }, /* console */ { DAVINCI_LPSC_GPIO }, }; @@ -150,7 +150,7 @@ int board_init(void) writel(readl(&davinci_syscfg_regs->suspsrc) & ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | DAVINCI_SYSCFG_SUSPSRC_SPI1 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | - DAVINCI_SYSCFG_SUSPSRC_UART2), + DAVINCI_SYSCFG_SUSPSRC_UART0), &davinci_syscfg_regs->suspsrc); /* configure pinmux settings */ @@ -167,7 +167,7 @@ int board_init(void) /* enable the console UART */ writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | DAVINCI_UART_PWREMU_MGMT_UTRST), - &davinci_uart2_ctrl_regs->pwremu_mgmt); + &davinci_uart0_ctrl_regs->pwremu_mgmt); return 0; } -- cgit