From e222b1f36fedb0363dbc21e0add7dc3848bae553 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Tue, 14 Jan 2014 11:34:26 +0530 Subject: powerpc/mpc85xx:Increase binary size for P, B & T series boards. u-boot binary size for Freescale mpc85xx platforms is 512KB. This has been reached to upper limit for some of the platforms causig linker error. So, Increase the u-boot binary size to 768KB. Signed-off-by: York Sun Signed-off-by: Prabhakar Kushwaha --- board/freescale/c29xpcie/README | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'board/freescale/c29xpcie/README') diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README index 430f08244a..3bc396b35a 100644 --- a/board/freescale/c29xpcie/README +++ b/board/freescale/c29xpcie/README @@ -62,9 +62,9 @@ Build and program u-boot to NOR flash 2. Program u-boot.bin into NOR flash => tftp $loadaddr $uboot - => protect off eff80000 +$filesize - => erase eff80000 +$filesize - => cp.b $loadaddr eff80000 $filesize + => protect off eff40000 +$filesize + => erase eff40000 +$filesize + => cp.b $loadaddr eff40000 $filesize 3. Check SW5[1:4]= 1111 and SW5[6]=0, then power on. @@ -73,9 +73,9 @@ Alternate NOR bank There are four banks in C29XPCIE board, example to change bank booting: 1. Program u-boot.bin into alternate NOR bank => tftp $loadaddr $uboot - => protect off e9f80000 +$filesize - => erase e9f80000 +$filesize - => cp.b $loadaddr e9f80000 $filesize + => protect off e9f40000 +$filesize + => erase e9f40000 +$filesize + => cp.b $loadaddr e9f40000 $filesize 2. Switch to alternate NOR bank => cpld_cmd reset altbank [bank] -- cgit