From a877880c6949e948bd63cd6ea4e216573d2f53dd Mon Sep 17 00:00:00 2001 From: York Sun Date: Mon, 29 Oct 2007 13:58:39 -0500 Subject: 8610: Add 8610 DIU display driver 1280x1024 and 1024x768 @ 32 bpp are supported now. DVI, Single-link LVDS, Double-link LVDS are all supported. Environmental variable "monitor" is used to specify monitor port. A new command "diufb" is introduced to reinitialize monitor and display a BMP file in the memory. So far, 1-bit, 4-bit, 8-bit and 24-bit BMP formats are supported. diufb init - initialize the diu driver Enable the port specified in the environmental variable "monitor" diufb addr - display bmp file in memory. The bmp image should be no bigger than the resolution, 1280x1024 for DVI and double-link LVDS, 1024x768 for single-link LVDS. Note, this driver allocate memory but doesn't free it after use It is written on purpose -- to avoid a failure of reallocation due to memory fragement. ECC of DDR is disabled for DIU performance. L2 data cache is also disabled. Signed-off-by: York Sun Signed-off-by: Jon loeliger --- board/freescale/common/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'board/freescale/common/Makefile') diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 44f613e418..9cee9f19bb 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -31,7 +31,9 @@ LIB = $(obj)lib$(VENDOR).a COBJS := sys_eeprom.o \ pixis.o \ - pq-mds-pib.o + pq-mds-pib.o \ + fsl_logo_bmp.o \ + fsl_diu_fb.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) -- cgit