From 29f75a5ce5800cf39d29e7669b27e6deb4038f28 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 20 Dec 2011 05:46:34 +0000 Subject: mx28evk: Add initial support for MX28EVK board Add initial support for Freescale MX28EVK board. Tested boot via SD card and by loading a kernel via TFTP through the FEC interface. Signed-off-by: Fabio Estevam Acked-by: Marek Vasut Acked-by: Stefano Babic --- board/freescale/mx28evk/mx28evk.c | 169 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 169 insertions(+) create mode 100644 board/freescale/mx28evk/mx28evk.c (limited to 'board/freescale/mx28evk/mx28evk.c') diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c new file mode 100644 index 0000000000..0d04d447ad --- /dev/null +++ b/board/freescale/mx28evk/mx28evk.c @@ -0,0 +1,169 @@ +/* + * Freescale MX28EVK board + * + * (C) Copyright 2011 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * Based on m28evk.c: + * Copyright (C) 2011 Marek Vasut + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Functions + */ +int board_early_init_f(void) +{ + /* IO0 clock at 480MHz */ + mx28_set_ioclk(MXC_IOCLK0, 480000); + /* IO1 clock at 480MHz */ + mx28_set_ioclk(MXC_IOCLK1, 480000); + + /* SSP0 clock at 96MHz */ + mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); + /* SSP2 clock at 96MHz */ + mx28_set_sspclk(MXC_SSPCLK2, 96000, 0); + + return 0; +} + +int dram_init(void) +{ + return mx28_dram_init(); +} + +int board_init(void) +{ + /* Adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +#ifdef CONFIG_CMD_MMC +static int mx28evk_mmc_wp(int id) +{ + if (id != 0) { + printf("MXS MMC: Invalid card selected (card id = %d)\n", id); + return 1; + } + + return gpio_get_value(MX28_PAD_SSP1_SCK__GPIO_2_12); +} + +int board_mmc_init(bd_t *bis) +{ + /* Configure WP as input */ + gpio_direction_input(MX28_PAD_SSP1_SCK__GPIO_2_12); + + /* Configure MMC0 Power Enable */ + gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0); + + return mxsmmc_initialize(bis, 0, mx28evk_mmc_wp); +} +#endif + +#ifdef CONFIG_CMD_NET + +#define MII_OPMODE_STRAP_OVERRIDE 0x16 +#define MII_PHY_CTRL1 0x1e +#define MII_PHY_CTRL2 0x1f + +int fecmxc_mii_postcall(int phy) +{ + miiphy_write("FEC1", phy, MII_BMCR, 0x9000); + miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202); + if (phy == 3) + miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8180); + return 0; +} + +int board_eth_init(bd_t *bis) +{ + struct mx28_clkctrl_regs *clkctrl_regs = + (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE; + struct eth_device *dev; + int ret; + + ret = cpu_eth_init(bis); + + /* MX28EVK uses ENET_CLK PAD to drive FEC clock */ + writel(CLKCTRL_ENET_TIME_SEL_RMII_CLK | CLKCTRL_ENET_CLK_OUT_EN, + &clkctrl_regs->hw_clkctrl_enet); + + /* Power-on FECs */ + gpio_direction_output(MX28_PAD_SSP1_DATA3__GPIO_2_15, 0); + + /* Reset FEC PHYs */ + gpio_direction_output(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 0); + udelay(200); + gpio_set_value(MX28_PAD_ENET0_RX_CLK__GPIO_4_13, 1); + + ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE); + if (ret) { + puts("FEC MXS: Unable to init FEC0\n"); + return ret; + } + + ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE); + if (ret) { + puts("FEC MXS: Unable to init FEC1\n"); + return ret; + } + + dev = eth_get_dev_by_name("FEC0"); + if (!dev) { + puts("FEC MXS: Unable to get FEC0 device entry\n"); + return -EINVAL; + } + + ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall); + if (ret) { + puts("FEC MXS: Unable to register FEC0 mii postcall\n"); + return ret; + } + + dev = eth_get_dev_by_name("FEC1"); + if (!dev) { + puts("FEC MXS: Unable to get FEC1 device entry\n"); + return -EINVAL; + } + + ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall); + if (ret) { + puts("FEC MXS: Unable to register FEC1 mii postcall\n"); + return ret; + } + + return ret; +} + +#endif -- cgit