From 71a988aa630f013b8425789351971dc4e202593d Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Fri, 18 Jan 2013 16:14:24 +0000 Subject: imximage.cfg: run files through C preprocessor The '#' used as comments in the files cause the preprocessor trouble, so change to /* */. The mkimage command which uses this preprocessor output was moved to arch/arm/imx-common/Makefile .gitignore was updated to ignore .cfgtmp files. Signed-off-by: Troy Kisky --- board/freescale/mx51evk/imximage.cfg | 114 ++++++++++++++++++----------------- 1 file changed, 60 insertions(+), 54 deletions(-) (limited to 'board/freescale/mx51evk') diff --git a/board/freescale/mx51evk/imximage.cfg b/board/freescale/mx51evk/imximage.cfg index a875e8ff55..3e141eef3e 100644 --- a/board/freescale/mx51evk/imximage.cfg +++ b/board/freescale/mx51evk/imximage.cfg @@ -1,46 +1,50 @@ -# -# (C Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) +/* + * (C Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM spi -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ -# Setting IOMUXC +/* Setting IOMUXC */ DATA 4 0x73FA88a0 0x200 DATA 4 0x73FA850c 0x20c5 DATA 4 0x73FA8510 0x20c5 @@ -65,22 +69,24 @@ DATA 4 0x73FA88a4 0x6 DATA 4 0x73FA88ac 0x6 DATA 4 0x73FA88b8 0x6 -# Setting DDR for micron -# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model -# CAS=3 BL=4 -# ESDCTL_ESDCTL0 +/* + * Setting DDR for micron + * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model + * CAS=3 BL=4 + */ +/* ESDCTL_ESDCTL0 */ DATA 4 0x83FD9000 0x82a20000 -# ESDCTL_ESDCTL1 +/* ESDCTL_ESDCTL1 */ DATA 4 0x83FD9008 0x82a20000 -# ESDCTL_ESDMISC +/* ESDCTL_ESDMISC */ DATA 4 0x83FD9010 0x000ad0d0 -# ESDCTL_ESDCFG0 +/* ESDCTL_ESDCFG0 */ DATA 4 0x83FD9004 0x333574aa -# ESDCTL_ESDCFG1 +/* ESDCTL_ESDCFG1 */ DATA 4 0x83FD900C 0x333574aa -# Init DRAM on CS0 -# ESDCTL_ESDSCR +/* Init DRAM on CS0 */ +/* ESDCTL_ESDSCR */ DATA 4 0x83FD9014 0x04008008 DATA 4 0x83FD9014 0x0000801a DATA 4 0x83FD9014 0x0000801b @@ -94,7 +100,7 @@ DATA 4 0x83FD9014 0x03808019 DATA 4 0x83FD9014 0x00408019 DATA 4 0x83FD9014 0x00008000 -# Init DRAM on CS1 +/* Init DRAM on CS1 */ DATA 4 0x83FD9014 0x0400800c DATA 4 0x83FD9014 0x0000801e DATA 4 0x83FD9014 0x0000801f @@ -108,12 +114,12 @@ DATA 4 0x83FD9014 0x0380801d DATA 4 0x83FD9014 0x0040801d DATA 4 0x83FD9014 0x00008004 -# Write to CTL0 +/* Write to CTL0 */ DATA 4 0x83FD9000 0xb2a20000 -# Write to CTL1 +/* Write to CTL1 */ DATA 4 0x83FD9008 0xb2a20000 -# ESDMISC +/* ESDMISC */ DATA 4 0x83FD9010 0x000ad6d0 -#ESDCTL_ESDCDLYGD +/* ESDCTL_ESDCDLYGD */ DATA 4 0x83FD9034 0x90000000 DATA 4 0x83FD9014 0x00000000 -- cgit