From c7336815078ff3745e3130aeff35991e3e98e61e Mon Sep 17 00:00:00 2001
From: Łukasz Majewski <l.majewski@samsung.com>
Date: Tue, 13 Nov 2012 03:21:55 +0000
Subject: pmic: Extend PMIC framework to support multiple instances of PMIC
 devices

The PMIC framework has been extended to support multiple instances of
the variety of devices responsible for power management.
This change allows supporting of e.g. fuel gauge, charger, MUIC (Micro USB
Interface Circuit).
Power related includes have been moved to ./include/power directory.
This is a first of a series of patches - in the future "pmic" will be
replaced with "power".

Two important issues:
1. The PMIC needs to be initialized just after malloc is configured
2. It uses list to hold information about available PMIC devices

Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Stefano Babic <sbabic@denx.de>
---
 board/freescale/mx53loco/mx53loco.c | 21 ++++++++++++++++-----
 1 file changed, 16 insertions(+), 5 deletions(-)

(limited to 'board/freescale/mx53loco/mx53loco.c')

diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index a11e883186..f4a9b08420 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -36,7 +36,7 @@
 #include <mmc.h>
 #include <fsl_esdhc.h>
 #include <asm/gpio.h>
-#include <pmic.h>
+#include <power/pmic.h>
 #include <dialog_pmic.h>
 #include <fsl_pmic.h>
 #include <linux/fb.h>
@@ -344,10 +344,16 @@ static int power_init(void)
 	unsigned int val;
 	int ret = -1;
 	struct pmic *p;
+	int retval;
 
 	if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) {
-		pmic_dialog_init();
-		p = get_pmic();
+		retval = pmic_dialog_init(I2C_PMIC);
+		if (retval)
+			return retval;
+
+		p = pmic_get("DIALOG_PMIC");
+		if (!p)
+			return -ENODEV;
 
 		/* Set VDDA to 1.25V */
 		val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
@@ -363,8 +369,13 @@ static int power_init(void)
 	}
 
 	if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) {
-		pmic_init();
-		p = get_pmic();
+		retval = pmic_init(I2C_PMIC);
+		if (retval)
+			return retval;
+
+		p = pmic_get("DIALOG_PMIC");
+		if (!p)
+			return -ENODEV;
 
 		/* Set VDDGP to 1.25V for 1GHz on SW1 */
 		pmic_reg_read(p, REG_SW_0, &val);
-- 
cgit