From e222b1f36fedb0363dbc21e0add7dc3848bae553 Mon Sep 17 00:00:00 2001 From: Prabhakar Kushwaha Date: Tue, 14 Jan 2014 11:34:26 +0530 Subject: powerpc/mpc85xx:Increase binary size for P, B & T series boards. u-boot binary size for Freescale mpc85xx platforms is 512KB. This has been reached to upper limit for some of the platforms causig linker error. So, Increase the u-boot binary size to 768KB. Signed-off-by: York Sun Signed-off-by: Prabhakar Kushwaha --- board/freescale/p1010rdb/README.P1010RDB-PA | 12 ++++++------ board/freescale/p1010rdb/README.P1010RDB-PB | 4 ++-- 2 files changed, 8 insertions(+), 8 deletions(-) (limited to 'board/freescale/p1010rdb') diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA index 158a1b3152..cde246dde2 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PA +++ b/board/freescale/p1010rdb/README.P1010RDB-PA @@ -104,9 +104,9 @@ Build and burn u-boot to NOR flash 2. Burn u-boot.bin into NOR flash => tftp $loadaddr $uboot - => protect off eff80000 +$filesize - => erase eff80000 +$filesize - => cp.b $loadaddr eff80000 $filesize + => protect off eff40000 +$filesize + => erase eff40000 +$filesize + => cp.b $loadaddr eff40000 $filesize 3. Check SW4[1:4]= 1111 and SW6[4]=0, then power on. @@ -115,9 +115,9 @@ Alternate NOR bank ================== 1. Burn u-boot.bin into alternate NOR bank => tftp $loadaddr $uboot - => protect off eef80000 +$filesize - => erase eef80000 +$filesize - => cp.b $loadaddr eef80000 $filesize + => protect off eef40000 +$filesize + => erase eef40000 +$filesize + => cp.b $loadaddr eef40000 $filesize 2. Switch to alternate NOR bank => mw.b ffb00009 1 diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB index cf459b339e..c5d1419445 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PB +++ b/board/freescale/p1010rdb/README.P1010RDB-PB @@ -149,11 +149,11 @@ Steps to program images to flash for different boot mode 1. NOR boot => tftp 1000000 u-boot.bin For bank0 - => pro off all;era eff80000 efffffff;cp.b 1000000 eff80000 $filesize + => pro off all;era eff40000 efffffff;cp.b 1000000 eff40000 $filesize set SW1[8]=0, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board For bank1 - => pro off all;era eef80000 eeffffff;cp.b 1000000 eef80000 $filesize + => pro off all;era eef40000 eeffffff;cp.b 1000000 eef40000 $filesize set SW1[8]=1, SW4[1:4]= 1111 and SW3[3:4]= 00, then power on the board 2. NAND boot -- cgit