From 0c871e952e77fe9f3b88d52778d2b5d82da4d884 Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Tue, 8 Feb 2011 13:13:15 +0530 Subject: powerpc/85xx: Use DDR for RAMBOOT instead of L2 SRAM on p1_p2_rdb Using DDR as RAMBOOT base instead of L2SRAM for SDCard and SPI Flash boot loaders because: - P1_P2_RDB boards have soldered DDR so no need for SPD - Also P102x has 256K L2 cache size so becomes a limiting factor for size of image that could be loaded in SRAM mode and would require three stage boot loader (TPL). Changes done: 1. CONFIG_SYS_TEXT_BASE to 0x11000000 2. CONFIG_RESET_VECTOR_ADDRESS to 0x1107fffc Signed-off-by: Priyanka Jain Signed-off-by: Poonam Aggrwal Signed-off-by: Dipen Dudhat Signed-off-by: Kumar Gala --- board/freescale/p1_p2_rdb/ddr.c | 15 +++++++++++---- board/freescale/p1_p2_rdb/tlb.c | 13 ++++--------- 2 files changed, 15 insertions(+), 13 deletions(-) (limited to 'board/freescale') diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index 44faec3a0b..853044e1cf 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -202,6 +202,17 @@ phys_size_t fixed_sdram (void) struct cpu_type *cpu; ulong ddr_freq, ddr_freq_mhz; + cpu = gd->cpu; + /* P1020 and it's derivatives support max 32bit DDR width */ + if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1020_E || + cpu->soc_ver == SVR_P1011 || cpu->soc_ver == SVR_P1011_E) { + ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2); + } else { + ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + } +#if defined(CONFIG_SYS_RAMBOOT) + return ddr_size; +#endif ddr_freq = get_ddr_freq(0); ddr_freq_mhz = ddr_freq / 1000000; @@ -220,16 +231,12 @@ phys_size_t fixed_sdram (void) panic("Unsupported DDR data rate %s MT/s data rate\n", strmhz(buf, ddr_freq)); - cpu = gd->cpu; /* P1020 and it's derivatives support max 32bit DDR width */ if(cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1020_E || cpu->soc_ver == SVR_P1011 || cpu->soc_ver == SVR_P1011_E) { ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_32_BE; ddr_cfg_regs.cs[0].bnds = 0x0000001F; - ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2); } - else - ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); diff --git a/board/freescale/p1_p2_rdb/tlb.c b/board/freescale/p1_p2_rdb/tlb.c index a46b1b5670..9b166b2151 100644 --- a/board/freescale/p1_p2_rdb/tlb.c +++ b/board/freescale/p1_p2_rdb/tlb.c @@ -80,15 +80,10 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_1M, 1), -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) - /* *I*G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_256K, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, - CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_256K, 1), +#if defined(CONFIG_SYS_RAMBOOT) + SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 7, BOOKE_PAGESZ_1G, 1) #endif }; -- cgit