From c4d580797daf09c642087e3b41d58a7ddd2457a8 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Fri, 4 Jan 2013 04:06:16 +0000 Subject: powerpc/p2041: add RCW file for P2041RDB All the dev boards of Freescale's QorIQ family have a RCW that is supported by the u-boot.pbl build target. This patch adds one for the P2041 dev board. This RCW is suitable for the RAMBOOT_PBL scenarios and was tested on the P2041RDB booting from the eSPI NOR Flash (P2041RDB_SPIFLASH config). Signed-off-by: Valentin Longchamp Signed-off-by: Andy Fleming --- board/freescale/corenet_ds/rcw_p2041rdb.cfg | 11 +++++++++++ 1 file changed, 11 insertions(+) create mode 100644 board/freescale/corenet_ds/rcw_p2041rdb.cfg (limited to 'board/freescale') diff --git a/board/freescale/corenet_ds/rcw_p2041rdb.cfg b/board/freescale/corenet_ds/rcw_p2041rdb.cfg new file mode 100644 index 0000000000..8df19dd3fe --- /dev/null +++ b/board/freescale/corenet_ds/rcw_p2041rdb.cfg @@ -0,0 +1,11 @@ +# +# Default RCW for P2041RDB. +# + +#PBL preamble and RCW header +aa55aa55 010e0100 +#64 bytes RCW data +12600000 00000000 241C0000 00000000 +649FA0C1 C3C02000 58000000 40000000 +00000000 00000000 00000000 D0030F07 +00000000 00000000 00000000 00000000 -- cgit