From a3f9d6c7791bbf0ff7fc68d49abcc5b53c6f7e48 Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Wed, 28 Oct 2015 11:46:32 +0100 Subject: mpc83xx: Add strider board The gdsys strider board is based on a Freescale MPC8308 SOC. It boots from NOR-Flash, kernel and rootfs are stored on SD-Card. On board peripherals include: - 1x 10/100 Mbit/s Ethernet (optional) - Lattice ECP3 FPGA connected via eLBC Signed-off-by: Dirk Eibach [trini: Drop setting CONFIG_SYS_GENERIC_BOARD, this is always true now] Signed-off-by: Tom Rini --- board/gdsys/common/Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'board/gdsys/common/Makefile') diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index 95e41debe5..ba48e8b9f3 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -9,7 +9,9 @@ obj-$(CONFIG_SYS_FPGA_COMMON) += fpga.o obj-$(CONFIG_CMD_IOLOOP) += cmd_ioloop.o obj-$(CONFIG_IO) += miiphybb.o obj-$(CONFIG_IO64) += miiphybb.o -obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o phy.o +obj-$(CONFIG_IOCON) += osd.o mclink.o dp501.o phy.o ch7301.o obj-$(CONFIG_DLVISION_10G) += osd.o dp501.o obj-$(CONFIG_CONTROLCENTERD) += dp501.o obj-$(CONFIG_HRCON) += osd.o mclink.o dp501.o phy.o +obj-$(CONFIG_STRIDER) += mclink.o dp501.o phy.o ioep-fpga.o adv7611.o ch7301.o +obj-$(CONFIG_STRIDER_CON) += osd.o -- cgit