From d271a6114177ca9c80cc9676773f49a050e13381 Mon Sep 17 00:00:00 2001 From: Javier Martinez Canillas Date: Sat, 28 Jul 2012 01:19:34 +0000 Subject: OMAP3: igep00x0: add SPL support for IGEP-based boards This patch adds SPL support for IGEP-based boards. Tested on an IGEPv2 Rev.C board with Micron NAND Flash memory. Signed-off-by: Javier Martinez Canillas --- board/isee/igep0030/config.mk | 33 --------------------------------- board/isee/igep0030/igep0030.c | 42 +++++++++++++++++++++++++++++++++++++++++- 2 files changed, 41 insertions(+), 34 deletions(-) delete mode 100644 board/isee/igep0030/config.mk (limited to 'board/isee/igep0030') diff --git a/board/isee/igep0030/config.mk b/board/isee/igep0030/config.mk deleted file mode 100644 index 059a8787f3..0000000000 --- a/board/isee/igep0030/config.mk +++ /dev/null @@ -1,33 +0,0 @@ -# -# (C) Copyright 2009 -# ISEE 2007 SL, -# -# IGEP0030 uses OMAP3 (ARM-CortexA8) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License, or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place, Suite 330, Boston, -# MA 02111-1307 USA -# -# Physical Address: -# 8000'0000 (bank0) -# A000/0000 (bank1) -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) - -# For use with external or internal boots. -CONFIG_SYS_TEXT_BASE = 0x80008000 diff --git a/board/isee/igep0030/igep0030.c b/board/isee/igep0030/igep0030.c index 653c1b5abb..4f8b6452df 100644 --- a/board/isee/igep0030/igep0030.c +++ b/board/isee/igep0030/igep0030.c @@ -45,7 +45,47 @@ int board_init(void) return 0; } -#ifdef CONFIG_GENERIC_MMC +#ifdef CONFIG_SPL_BUILD +/* + * Routine: omap_rev_string + * Description: For SPL builds output board rev + */ +void omap_rev_string(void) +{ +} + +/* + * Routine: get_board_mem_timings + * Description: If we use SPL then there is no x-loader nor config header + * so we have to setup the DDR timings ourself on both banks. + */ +void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, + u32 *mr) +{ + *mr = MICRON_V_MR_165; +#ifdef CONFIG_BOOT_NAND + *mcfg = MICRON_V_MCFG_200(512 << 20); + *ctrla = MICRON_V_ACTIMA_200; + *ctrlb = MICRON_V_ACTIMB_200; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; +#else + if (get_cpu_family() == CPU_OMAP34XX) { + *mcfg = NUMONYX_V_MCFG_165(512 << 20); + *ctrla = NUMONYX_V_ACTIMA_165; + *ctrlb = NUMONYX_V_ACTIMB_165; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + + } else { + *mcfg = NUMONYX_V_MCFG_200(512 << 20); + *ctrla = NUMONYX_V_ACTIMA_200; + *ctrlb = NUMONYX_V_ACTIMB_200; + *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + } +#endif +} +#endif + +#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) int board_mmc_init(bd_t *bis) { omap_mmc_init(0, 0, 0); -- cgit