From bbeff30cbd1c5d551eb0ad1c2239ec01844c0b0a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 2 Jun 2008 17:37:28 +0200 Subject: ppc4xx: Remove superfluous dram_init() call or replace it by initdram() Historically the 405 U-Boot port had a dram_init() call in early init stage. This function was still called from start.S and most of the time coded in assembler. This is not needed anymore (since a long time) and boards should implement the common initdram() function in C instead. This patch now removed the dram_init() call from start.S and removes the empty implementations that are scattered through most of the 405 board ports. Some older board ports really implement this dram_init() though. These are: csb272 csb472 ERIC EXBITGEN W7OLMC W7OLMG I changed those boards to call this assembler dram_init() function now from their board specific initdram() instead. This *should* work, but please test again on those platforms. And it is perhaps a good idea that those boards use some common 405 SDRAM initialization code from cpu/ppc4xx at some time. So further patches welcome here. Signed-off-by: Stefan Roese --- board/jse/init.S | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'board/jse') diff --git a/board/jse/init.S b/board/jse/init.S index 231cd1caf5..c564ed3c94 100644 --- a/board/jse/init.S +++ b/board/jse/init.S @@ -93,13 +93,3 @@ ext_bus_cntlr_init: mtdcr ebccfgd,r4 blr - - -/*----------------------------------------------------------------------- */ -/* Function: sdram_init */ -/* Description: This function is called by cpu/ppc4xx/start.S code */ -/* to get the SDRAM initialized. */ -/*----------------------------------------------------------------------- */ - .globl sdram_init -sdram_init: - blr -- cgit From 9973e3c614721bbf169882ffc3be266a6611cd60 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Mon, 9 Jun 2008 16:03:40 -0500 Subject: Change initdram() return type to phys_size_t This patch changes the return type of initdram() from long int to phys_size_t. This is required for a couple of reasons: long int limits the amount of dram to 2GB, and u-boot in general is moving over to phys_size_t to represent the size of physical memory. phys_size_t is defined as an unsigned long on almost all current platforms. This patch *only* changes the return type of the initdram function (in include/common.h, as well as in each board's implementation of initdram). It does not actually modify the code inside the function on any of the platforms; platforms which wish to support more than 2GB of DRAM will need to modify their initdram() function code. Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc MPC8641HPCN. Signed-off-by: Becky Bruce --- board/jse/sdram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'board/jse') diff --git a/board/jse/sdram.c b/board/jse/sdram.c index 9060d979d0..8ba6c454fd 100644 --- a/board/jse/sdram.c +++ b/board/jse/sdram.c @@ -30,7 +30,7 @@ * in lib_ppc/board.c to initialize the memory and return what I * found. */ -long int initdram (int board_type) +phys_size_t initdram (int board_type) { /* Configure the SDRAMS */ -- cgit From c8a3b109f07f02342d097b30908965f7261d9f15 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 2 Jul 2008 23:49:18 +0200 Subject: Cleanup out-or-tree building for some boards (.depend) Signed-off-by: Wolfgang Denk --- board/jse/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'board/jse') diff --git a/board/jse/Makefile b/board/jse/Makefile index e858c83f73..6be03ac541 100644 --- a/board/jse/Makefile +++ b/board/jse/Makefile @@ -39,7 +39,7 @@ clean: rm -f $(SOBJS) $(OBJS) distclean: clean - rm -f $(LIB) core *.bak .depend + rm -f $(LIB) core *.bak $(obj).depend ######################################################################### -- cgit