From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/kup/kup4x/kup4x.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'board/kup/kup4x') diff --git a/board/kup/kup4x/kup4x.c b/board/kup/kup4x/kup4x.c index f07ef18703..c5b742dd72 100644 --- a/board/kup/kup4x/kup4x.c +++ b/board/kup/kup4x/kup4x.c @@ -114,7 +114,7 @@ const uint sdram_table[] = { int checkboard (void) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; volatile uchar *latch; uchar rev, mod; @@ -136,7 +136,7 @@ int checkboard (void) phys_size_t initdram (int board_type) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; long int size_b0 = 0; long int size_b1 = 0; @@ -151,7 +151,7 @@ phys_size_t initdram (int board_type) * with two SDRAM banks or four cycles every 31.2 us with one * bank. It will be adjusted after memory sizing. */ - memctl->memc_mptpr = CFG_MPTPR; + memctl->memc_mptpr = CONFIG_SYS_MPTPR; memctl->memc_mar = 0x00000088; @@ -160,13 +160,13 @@ phys_size_t initdram (int board_type) * preliminary addresses - these have to be modified after the * SDRAM size has been determined. */ -/* memctl->memc_or1 = CFG_OR1_PRELIM; */ -/* memctl->memc_br1 = CFG_BR1_PRELIM; */ +/* memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM; */ +/* memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM; */ -/* memctl->memc_or2 = CFG_OR2_PRELIM; */ -/* memctl->memc_br2 = CFG_BR2_PRELIM; */ +/* memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; */ +/* memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; */ - memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ + memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ udelay (200); @@ -207,7 +207,7 @@ phys_size_t initdram (int board_type) size_b1 = 0x00800000; size_b2 = 0x00800000; size_b3 = 0x00800000; - memctl->memc_mptpr = CFG_MPTPR; + memctl->memc_mptpr = CONFIG_SYS_MPTPR; udelay (1000); memctl->memc_or1 = 0xFF800A00; memctl->memc_br1 = 0x00000081; @@ -222,7 +222,7 @@ phys_size_t initdram (int board_type) size_b1 = 0x01000000; size_b2 = 0x01000000; size_b3 = 0x01000000; - memctl->memc_mptpr = CFG_MPTPR; + memctl->memc_mptpr = CONFIG_SYS_MPTPR; udelay (1000); memctl->memc_or1 = 0xFF000A00; memctl->memc_br1 = 0x00000081; @@ -251,7 +251,7 @@ phys_size_t initdram (int board_type) static long int dram_size (long int mamr_value, long int *base, long int maxsize) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; volatile long int *addr; ulong cnt, val; @@ -294,7 +294,7 @@ static long int dram_size (long int mamr_value, long int *base, int misc_init_r (void) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; #ifdef CONFIG_IDE_LED /* Configure PA8 as output port */ -- cgit