From f68378d60a905d43155f2e89bf81999d3c93a90a Mon Sep 17 00:00:00 2001
From: Mark Jackson <mpfj-list@mimc.co.uk>
Date: Tue, 21 Jul 2009 11:35:22 +0100
Subject: Add LCD support to MIMC200 board

This patch updates the MIMC200 files to enable the LCD.

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
---
 board/mimc/mimc200/mimc200.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

(limited to 'board/mimc/mimc200')

diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c
index 6df741e397..78441c3b65 100644
--- a/board/mimc/mimc200/mimc200.c
+++ b/board/mimc/mimc200/mimc200.c
@@ -28,10 +28,40 @@
 #include <asm/arch/gpio.h>
 #include <asm/arch/hmatrix.h>
 #include <asm/arch/portmux.h>
+#include <atmel_lcdc.h>
 #include <lcd.h>
 
 #include "../../../cpu/at32ap/hsmc3.h"
 
+#if defined(CONFIG_LCD)
+/* 480x272x16 @ 72 Hz */
+vidinfo_t panel_info = {
+	.vl_col			= 480,			/* Number of columns */
+	.vl_row			= 272,			/* Number of rows */
+	.vl_clk			= 10000000,		/* pixel clock in ps */
+	.vl_sync		= ATMEL_LCDC_INVCLK_INVERTED |
+				  ATMEL_LCDC_INVLINE_INVERTED |
+				  ATMEL_LCDC_INVFRAME_INVERTED,
+	.vl_bpix		= LCD_COLOR16,		/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
+	.vl_tft			= 1,			/* 0 = passive, 1 = TFT */
+	.vl_hsync_len		= 42,			/* Length of horizontal sync */
+	.vl_left_margin		= 1,			/* Time from sync to picture */
+	.vl_right_margin	= 1,			/* Time from picture to sync */
+	.vl_vsync_len		= 1,			/* Length of vertical sync */
+	.vl_upper_margin	= 12,			/* Time from sync to picture */
+	.vl_lower_margin	= 1,			/* Time from picture to sync */
+	.mmio			= LCDC_BASE,		/* Memory mapped registers */
+};
+
+void lcd_enable(void)
+{
+}
+
+void lcd_disable(void)
+{
+}
+#endif
+
 DECLARE_GLOBAL_DATA_PTR;
 
 static const struct sdram_config sdram_config = {
@@ -110,6 +140,10 @@ int board_early_init_f(void)
 	portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
 #endif
 
+#if defined(CONFIG_LCD)
+	portmux_enable_lcdc(1);
+#endif
+
 	return 0;
 }
 
-- 
cgit