From 49b633b3d3c49ec91e8f00f0f1bbb34bb32a2269 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 26 Jun 2014 16:38:05 -0500 Subject: board: ti: dra7xx: add mux data for UART3 J6 EVM can be built with UART3 as console, but currently there's nothing muxing UART3 correctly. Likely this only works because, based on commit log, author was only testing with UART3 boot and - I assume - ROM code leave UART3 correctly muxed in that case. If we want to boot from MMC and still use UART3 as console, then we need to mux those signals correctly. Signed-off-by: Felipe Balbi --- board/ti/dra7xx/mux_data.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'board/ti') diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h index 38de9d5a8b..c9e202af68 100644 --- a/board/ti/dra7xx/mux_data.h +++ b/board/ti/dra7xx/mux_data.h @@ -31,10 +31,15 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {GPMC_A26, (IEN | PTU | PDIS | M1)}, /* mmc2_dat2 */ {GPMC_A27, (IEN | PTU | PDIS | M1)}, /* mmc2_dat3 */ {GPMC_CS1, (IEN | PTU | PDIS | M1)}, /* mmm2_cmd */ +#if (CONFIG_CONS_INDEX == 1) {UART1_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_RXD */ {UART1_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART1_TXD */ {UART1_CTSN, (IEN | PTU | PDIS | M3)}, /* UART1_CTSN */ {UART1_RTSN, (IEN | PTU | PDIS | M3)}, /* UART1_RTSN */ +#elif (CONFIG_CONS_INDEX == 3) + {UART3_RXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_RXD */ + {UART3_TXD, (FSC | IEN | PTU | PDIS | M0)}, /* UART3_TXD */ +#endif {I2C1_SDA, (IEN | PTU | PDIS | M0)}, /* I2C1_SDA */ {I2C1_SCL, (IEN | PTU | PDIS | M0)}, /* I2C1_SCL */ {MDIO_MCLK, (PTU | PEN | M0)}, /* MDIO_MCLK */ -- cgit