From 67c145a836d087ec59cbd78b97970789e78f1eba Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Thu, 22 Nov 2018 09:19:30 +0100 Subject: arm: baltos: move the board to CONFIG_BLK Use DM for both MMC and USB subsystems and use dedicated DTS for U-Boot configuration. Disable SPL support for GPIO and remove EVMSK leftover for DDR power control via GPIO. Signed-off-by: Yegor Yefremov Reviewed-by: Simon Glass --- board/vscom/baltos/mux.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'board/vscom/baltos/mux.c') diff --git a/board/vscom/baltos/mux.c b/board/vscom/baltos/mux.c index 94410ae35e..9c5542ea02 100644 --- a/board/vscom/baltos/mux.c +++ b/board/vscom/baltos/mux.c @@ -34,7 +34,6 @@ static struct module_pin_mux mmc0_pin_mux[] = { {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ - //{OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ {-1}, }; @@ -46,11 +45,6 @@ static struct module_pin_mux i2c1_pin_mux[] = { {-1}, }; -static struct module_pin_mux gpio0_7_pin_mux[] = { - {OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN)}, /* GPIO0_7 */ - {-1}, -}; - static struct module_pin_mux rmii1_pin_mux[] = { {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RGMII1_TCTL */ {OFFSET(mii1_txen), MODE(1)}, /* RGMII1_TCTL */ @@ -114,7 +108,6 @@ void enable_i2c1_pin_mux(void) void enable_board_pin_mux() { configure_module_pin_mux(i2c1_pin_mux); - configure_module_pin_mux(gpio0_7_pin_mux); configure_module_pin_mux(rgmii2_pin_mux); configure_module_pin_mux(rmii1_pin_mux); configure_module_pin_mux(mmc0_pin_mux); -- cgit