From 9660c5de74aae900077c3769d7d18b39a124d9d5 Mon Sep 17 00:00:00 2001 From: Peter Tyser Date: Fri, 22 Oct 2010 00:20:22 -0500 Subject: xes: Use common PCI initialization code Common Freescale code for PCI initialization now exists, so migrate X-ES boards to use it. Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- board/xes/common/fsl_8xxx_pci.c | 328 ++++++---------------------------------- 1 file changed, 49 insertions(+), 279 deletions(-) (limited to 'board/xes/common') diff --git a/board/xes/common/fsl_8xxx_pci.c b/board/xes/common/fsl_8xxx_pci.c index ece7882577..f425ceedc4 100644 --- a/board/xes/common/fsl_8xxx_pci.c +++ b/board/xes/common/fsl_8xxx_pci.c @@ -25,10 +25,10 @@ #include #include #include +#include #include #include -int first_free_busno = 0; #ifdef CONFIG_PCI1 static struct pci_controller pci1_hose; @@ -43,111 +43,6 @@ static struct pci_controller pcie2_hose; static struct pci_controller pcie3_hose; #endif -#ifdef CONFIG_MPC8572 -/* Correlate host/agent POR bits to usable info. Table 4-14 */ -struct host_agent_cfg_t { - uchar pcie_root[3]; - uchar rio_host; -} host_agent_cfg[8] = { - {{0, 0, 0}, 0}, - {{0, 1, 1}, 1}, - {{1, 0, 1}, 0}, - {{1, 1, 0}, 1}, - {{0, 0, 1}, 0}, - {{0, 1, 0}, 1}, - {{1, 0, 0}, 0}, - {{1, 1, 1}, 1} -}; - -/* Correlate port width POR bits to usable info. Table 4-15 */ -struct io_port_cfg_t { - uchar pcie_width[3]; - uchar rio_width; -} io_port_cfg[16] = { - {{0, 0, 0}, 0}, - {{0, 0, 0}, 0}, - {{4, 0, 0}, 0}, - {{4, 4, 0}, 0}, - {{0, 0, 0}, 0}, - {{0, 0, 0}, 0}, - {{0, 0, 0}, 4}, - {{4, 2, 2}, 0}, - {{0, 0, 0}, 0}, - {{0, 0, 0}, 0}, - {{0, 0, 0}, 0}, - {{4, 0, 0}, 4}, - {{4, 0, 0}, 4}, - {{0, 0, 0}, 4}, - {{0, 0, 0}, 4}, - {{8, 0, 0}, 0}, -}; -#elif defined CONFIG_MPC8548 -/* Correlate host/agent POR bits to usable info. Table 4-12 */ -struct host_agent_cfg_t { - uchar pci_host[2]; - uchar pcie_root[1]; - uchar rio_host; -} host_agent_cfg[8] = { - {{1, 1}, {0}, 0}, - {{1, 1}, {1}, 0}, - {{1, 1}, {0}, 1}, - {{0, 0}, {0}, 0}, /* reserved */ - {{0, 1}, {1}, 0}, - {{1, 1}, {1}, 0}, - {{0, 1}, {1}, 1}, - {{1, 1}, {1}, 1} -}; - -/* Correlate port width POR bits to usable info. Table 4-13 */ -struct io_port_cfg_t { - uchar pcie_width[1]; - uchar rio_width; -} io_port_cfg[8] = { - {{0}, 0}, - {{0}, 0}, - {{0}, 0}, - {{4}, 4}, - {{4}, 4}, - {{0}, 4}, - {{0}, 4}, - {{8}, 0}, -}; -#elif defined CONFIG_MPC86xx -/* Correlate host/agent POR bits to usable info. Table 4-17 */ -struct host_agent_cfg_t { - uchar pcie_root[2]; - uchar rio_host; -} host_agent_cfg[8] = { - {{0, 0}, 0}, - {{1, 0}, 1}, - {{0, 1}, 0}, - {{1, 1}, 1} -}; - -/* Correlate port width POR bits to usable info. Table 4-16 */ -struct io_port_cfg_t { - uchar pcie_width[2]; - uchar rio_width; -} io_port_cfg[16] = { - {{0, 0}, 0}, - {{0, 0}, 0}, - {{8, 0}, 0}, - {{8, 8}, 0}, - {{0, 0}, 0}, - {{8, 0}, 4}, - {{8, 0}, 4}, - {{8, 0}, 4}, - {{0, 0}, 0}, - {{0, 0}, 4}, - {{0, 0}, 4}, - {{0, 0}, 4}, - {{0, 0}, 0}, - {{0, 0}, 0}, - {{0, 8}, 0}, - {{8, 8}, 0}, -}; -#endif - /* * 85xx and 86xx share naming conventions, but different layout. * Correlate names to CPU-specific values to share common @@ -173,22 +68,22 @@ struct io_port_cfg_t { void pci_init_board(void) { - struct pci_controller *hose; - volatile ccsr_fsl_pci_t *pci; - int width; - int host; + struct fsl_pci_info pci_info[3]; + int first_free_busno = 0; + int num = 0; + int pcie_ep; + __maybe_unused int pcie_configured; + #if defined(CONFIG_MPC85xx) volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); #elif defined(CONFIG_MPC86xx) immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; #endif - uint devdisr = in_be32(&gur->devdisr); - uint io_sel = (in_be32(&gur->pordevsr) & MPC8xxx_PORDEVSR_IO_SEL) >> + u32 devdisr = in_be32(&gur->devdisr); + u32 pordevsr = in_be32(&gur->pordevsr); + __maybe_unused uint io_sel = (pordevsr & MPC8xxx_PORDEVSR_IO_SEL) >> MPC8xxx_PORDEVSR_IO_SEL_SHIFT; - uint host_agent = (in_be32(&gur->porbmsr) & MPC8xxx_PORBMSR_HA) >> - MPC8xxx_PORBMSR_HA_SHIFT; - struct pci_region *r; #ifdef CONFIG_PCI1 uint pci_spd_norm = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1_SPD; @@ -197,49 +92,19 @@ void pci_init_board(void) uint pcix = in_be32(&gur->pordevsr) & MPC85xx_PORDEVSR_PCI1; uint freq = CONFIG_SYS_CLK_FREQ / 1000 / 1000; - width = 0; /* Silence compiler warning... */ - io_sel &= 0xf; /* Silence compiler warning... */ - pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; - hose = &pci1_hose; - host = host_agent_cfg[host_agent].pci_host[0]; - r = hose->regions; - if (!(devdisr & MPC85xx_DEVDISR_PCI1)) { + SET_STD_PCI_INFO(pci_info[num], 1); + pcie_ep = fsl_setup_hose(&pci1_hose, pci_info[num].regs); printf("\n PCI1: %d bit %s, %s %d MHz, %s, %s\n", pci_32 ? 32 : 64, pcix ? "PCIX" : "PCI", pci_spd_norm ? ">=" : "<=", pcix ? freq * 2 : freq, - host ? "host" : "agent", + pcie_ep ? "agent" : "host", pci_arb ? "arbiter" : "external-arbiter"); - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCI1_MEM_BASE, - CONFIG_SYS_PCI1_MEM_PHYS, - CONFIG_SYS_PCI1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCI1_IO_BASE, - CONFIG_SYS_PCI1_IO_PHYS, - CONFIG_SYS_PCI1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - - hose->first_busno = first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - /* Unlock inbound PCI configuration cycles */ - if (!host) - fsl_pci_config_unlock(hose); - - first_free_busno = hose->last_busno + 1; - printf(" PCI1 on bus %02x - %02x\n", - hose->first_busno, hose->last_busno); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pci1_hose, first_free_busno); } else { printf(" PCI1: disabled\n"); } @@ -247,148 +112,53 @@ void pci_init_board(void) /* PCI1 not present on MPC8572 */ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); #endif -#ifdef CONFIG_PCIE1 - pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; - hose = &pcie1_hose; - host = host_agent_cfg[host_agent].pcie_root[0]; - width = io_port_cfg[io_sel].pcie_width[0]; - r = hose->regions; - - if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) { - printf("\n PCIE1 connected as %s (x%d)", - host ? "Root Complex" : "Endpoint", width); - if (in_be32(&pci->pme_msg_det)) { - out_be32(&pci->pme_msg_det, 0xffffffff); - debug(" with errors. Clearing. Now 0x%08x", - in_be32(&pci->pme_msg_det)); - } - printf("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_MEM_BASE, - CONFIG_SYS_PCIE1_MEM_PHYS, - CONFIG_SYS_PCIE1_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE1_IO_BASE, - CONFIG_SYS_PCIE1_IO_PHYS, - CONFIG_SYS_PCIE1_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - - hose->first_busno = first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - /* Unlock inbound PCI configuration cycles */ - if (!host) - fsl_pci_config_unlock(hose); - - first_free_busno = hose->last_busno + 1; - printf(" PCIE1 on bus %02x - %02x\n", - hose->first_busno, hose->last_busno); +#ifdef CONFIG_PCIE1 + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); + + if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE1)) { + SET_STD_PCIE_INFO(pci_info[num], 1); + pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs); + printf(" PCIE1 connected as %s\n", + pcie_ep ? "Endpoint" : "Root Complex"); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie1_hose, first_free_busno); + } else { + printf(" PCIE1: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE1); #endif /* CONFIG_PCIE1 */ #ifdef CONFIG_PCIE2 - pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE2_ADDR; - hose = &pcie2_hose; - host = host_agent_cfg[host_agent].pcie_root[1]; - width = io_port_cfg[io_sel].pcie_width[1]; - r = hose->regions; - - if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) { - printf("\n PCIE2 connected as %s (x%d)", - host ? "Root Complex" : "Endpoint", width); - if (in_be32(&pci->pme_msg_det)) { - out_be32(&pci->pme_msg_det, 0xffffffff); - debug(" with errors. Clearing. Now 0x%08x", - in_be32(&pci->pme_msg_det)); - } - printf("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_MEM_BASE, - CONFIG_SYS_PCIE2_MEM_PHYS, - CONFIG_SYS_PCIE2_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE2_IO_BASE, - CONFIG_SYS_PCIE2_IO_PHYS, - CONFIG_SYS_PCIE2_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - - hose->first_busno = first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - /* Unlock inbound PCI configuration cycles */ - if (!host) - fsl_pci_config_unlock(hose); - - first_free_busno = hose->last_busno + 1; - printf(" PCIE2 on bus %02x - %02x\n", - hose->first_busno, hose->last_busno); + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_2, io_sel); + + if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE2)) { + SET_STD_PCIE_INFO(pci_info[num], 2); + pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs); + printf(" PCIE2 connected as %s\n", + pcie_ep ? "Endpoint" : "Root Complex"); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie2_hose, first_free_busno); + } else { + printf(" PCIE2: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE2); #endif /* CONFIG_PCIE2 */ #ifdef CONFIG_PCIE3 - pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE3_ADDR; - hose = &pcie3_hose; - host = host_agent_cfg[host_agent].pcie_root[2]; - width = io_port_cfg[io_sel].pcie_width[2]; - r = hose->regions; - - if (width && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) { - printf("\n PCIE3 connected as %s (x%d)", - host ? "Root Complex" : "Endpoint", width); - if (in_be32(&pci->pme_msg_det)) { - out_be32(&pci->pme_msg_det, 0xffffffff); - debug(" with errors. Clearing. Now 0x%08x", - in_be32(&pci->pme_msg_det)); - } - printf("\n"); - - /* outbound memory */ - pci_set_region(r++, - CONFIG_SYS_PCIE3_MEM_BASE, - CONFIG_SYS_PCIE3_MEM_PHYS, - CONFIG_SYS_PCIE3_MEM_SIZE, - PCI_REGION_MEM); - - /* outbound io */ - pci_set_region(r++, - CONFIG_SYS_PCIE3_IO_BASE, - CONFIG_SYS_PCIE3_IO_PHYS, - CONFIG_SYS_PCIE3_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = r - hose->regions; - - hose->first_busno = first_free_busno; - - fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); - - /* Unlock inbound PCI configuration cycles */ - if (!host) - fsl_pci_config_unlock(hose); - - first_free_busno = hose->last_busno + 1; - printf(" PCIE3 on bus %02x - %02x\n", - hose->first_busno, hose->last_busno); + pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_3, io_sel); + + if (pcie_configured && !(devdisr & MPC8xxx_DEVDISR_PCIE3)) { + SET_STD_PCIE_INFO(pci_info[num], 3); + pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs); + printf(" PCIE3 connected as %s\n", + pcie_ep ? "Endpoint" : "Root Complex"); + first_free_busno = fsl_pci_init_port(&pci_info[num++], + &pcie3_hose, first_free_busno); + } else { + printf(" PCIE3: disabled\n"); } #else setbits_be32(&gur->devdisr, MPC8xxx_DEVDISR_PCIE3); -- cgit From 92af6549b8c52e9c973e4e197aa4d1edf4df5803 Mon Sep 17 00:00:00 2001 From: John Schmoller Date: Fri, 22 Oct 2010 00:20:24 -0500 Subject: xes: Consolidate checkboard() Create a common checkboard() function to support all X-ES's Freescale boards. Also, add a get_board_derivative() function which reads hardware strapping resistors to determine what model a board is. This allows one U-Boot image to support multiple boards. Signed-off-by: John Schmoller Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- board/xes/common/Makefile | 2 ++ board/xes/common/board.c | 64 ++++++++++++++++++++++++++++++++++++++++ board/xes/common/fsl_8xxx_misc.c | 47 +++++++++++++++++++++++++++++ board/xes/common/fsl_8xxx_misc.h | 28 ++++++++++++++++++ 4 files changed, 141 insertions(+) create mode 100644 board/xes/common/board.c create mode 100644 board/xes/common/fsl_8xxx_misc.c create mode 100644 board/xes/common/fsl_8xxx_misc.h (limited to 'board/xes/common') diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile index d022831830..bfade319b9 100644 --- a/board/xes/common/Makefile +++ b/board/xes/common/Makefile @@ -33,6 +33,8 @@ COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o COBJS-$(CONFIG_MPC8572) += fsl_8xxx_clk.o COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o COBJS-$(CONFIG_FSL_DDR2) += fsl_8xxx_ddr.o +COBJS-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o +COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) diff --git a/board/xes/common/board.c b/board/xes/common/board.c new file mode 100644 index 0000000000..738f0a6486 --- /dev/null +++ b/board/xes/common/board.c @@ -0,0 +1,64 @@ +/* + * Copyright 2009 Extreme Engineering Solutions, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +#include +#include "fsl_8xxx_misc.h" + +int checkboard(void) +{ + char name[] = CONFIG_SYS_BOARD_NAME; + char *s; + +#ifdef CONFIG_SYS_FORM_CUSTOM + s = "Custom"; +#elif CONFIG_SYS_FORM_6U_CPCI + s = "6U CompactPCI"; +#elif CONFIG_SYS_FORM_ATCA_PMC + s = "ATCA w/PMC"; +#elif CONFIG_SYS_FORM_ATCA_AMC + s = "ATCA w/AMC"; +#elif CONFIG_SYS_FORM_VME + s = "VME"; +#elif CONFIG_SYS_FORM_6U_VPX + s = "6U VPX"; +#elif CONFIG_SYS_FORM_PMC + s = "PMC"; +#elif CONFIG_SYS_FORM_PCI + s = "PCI"; +#elif CONFIG_SYS_FORM_3U_CPCI + s = "3U CompactPCI"; +#elif CONFIG_SYS_FORM_AMC + s = "AdvancedMC"; +#elif CONFIG_SYS_FORM_XMC + s = "XMC"; +#elif CONFIG_SYS_FORM_PMC_XMC + s = "PMC/XMC"; +#elif CONFIG_SYS_FORM_PCI_EXPRESS + s = "PCI Express"; +#elif CONFIG_SYS_FORM_3U_VPX + s = "3U VPX"; +#else +#error "Form factor not defined" +#endif + + name[strlen(name) - 1] += get_board_derivative(); + printf("Board: X-ES %s %s SBC\n", name, s); + + /* Display board specific information */ + puts(" "); + if ((s = getenv("board_rev"))) + printf("Rev %s, ", s); + if ((s = getenv("serial#"))) + printf("Serial# %s, ", s); + if ((s = getenv("board_cfg"))) + printf("Cfg %s", s); + puts("\n"); + + return 0; +} diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c new file mode 100644 index 0000000000..e37a3c1123 --- /dev/null +++ b/board/xes/common/fsl_8xxx_misc.c @@ -0,0 +1,47 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +/* + * Return a board's derivative model number. For example: + * return 2 for the XPedite5372 and return 1 for the XPedite5201. + */ +uint get_board_derivative(void) +{ +#if defined(CONFIG_MPC85xx) + volatile ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; +#elif defined(CONFIG_MPC86xx) + volatile immap_t *immap = (immap_t *)CONFIG_SYS_CCSRBAR; + volatile ccsr_gur_t *gur = &immap->im_gur; +#endif + + /* + * The top 4 lines of the local bus address are pulled low/high and + * can be read to determine the least significant digit of a board's + * model number. + */ + return gur->gpporcr >> 28; +} + + diff --git a/board/xes/common/fsl_8xxx_misc.h b/board/xes/common/fsl_8xxx_misc.h new file mode 100644 index 0000000000..ecc70daba1 --- /dev/null +++ b/board/xes/common/fsl_8xxx_misc.h @@ -0,0 +1,28 @@ +/* + * Copyright 2008 Extreme Engineering Solutions, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __FSL_8XXX_MISC_H___ +#define __FSL_8XXX_MISC_H___ + +uint get_board_derivative(void); + +#endif /* __FSL_8XXX_MISC_H__ */ -- cgit From 72fb68d53cfbe505319cbb4aa92a1fe7ecf3d4fb Mon Sep 17 00:00:00 2001 From: John Schmoller Date: Fri, 22 Oct 2010 00:20:25 -0500 Subject: xes: Add board_flash_wp_on() Add board_flash_wp_on() to check a pca9557 gpio pin to see if non-volatile memory write protection is enabled. Previously, write protected NOR flashes would fail initialization which resulted in a bootup error such as: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: ## Unknown FLASH on Bank 1 - Size = 0x00000000 = 0 MB ## Unknown FLASH on Bank 2 - Size = 0x00000000 = 0 MB *** failed *** ### ERROR ### Please RESET the board ### With this patch, NOR flash initialization is skipped: ... DTT: 53 C local / 64 C remote (adt7461@4c) DTT: 54 C local (ds1621@48) FLASH: Executed from FLASH1 POST memory PASSED FLASH: Uninitialized - Write Protect On L2: 1024 KB enabled NAND: 1024 MiB ... Note that flash related commands such as flinfo and saveenv will error out when flash write protection is enabled. Signed-off-by: John Schmoller Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- board/xes/common/fsl_8xxx_misc.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'board/xes/common') diff --git a/board/xes/common/fsl_8xxx_misc.c b/board/xes/common/fsl_8xxx_misc.c index e37a3c1123..b7fa6950b0 100644 --- a/board/xes/common/fsl_8xxx_misc.c +++ b/board/xes/common/fsl_8xxx_misc.c @@ -22,6 +22,21 @@ #include #include +#ifdef CONFIG_PCA953X +#include + +/* + * Determine if a board's flashes are write protected + */ +int board_flash_wp_on(void) +{ + if (pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) & + CONFIG_SYS_PCA953X_NVM_WP) + return 1; + + return 0; +} +#endif /* * Return a board's derivative model number. For example: -- cgit From bfe18815e8123f4456be8b5858b2b255d7881698 Mon Sep 17 00:00:00 2001 From: John Schmoller Date: Fri, 22 Oct 2010 00:20:34 -0500 Subject: XPedite5500 board support Initial support for Extreme Engineering Solutions XPedite5500 - a P2020-based PMC/XMC single board computer. Signed-off-by: John Schmoller Signed-off-by: Peter Tyser Signed-off-by: Kumar Gala --- board/xes/common/Makefile | 2 ++ board/xes/common/fsl_8xxx_clk.c | 11 +++++++++++ 2 files changed, 13 insertions(+) (limited to 'board/xes/common') diff --git a/board/xes/common/Makefile b/board/xes/common/Makefile index bfade319b9..16e0b66218 100644 --- a/board/xes/common/Makefile +++ b/board/xes/common/Makefile @@ -32,7 +32,9 @@ LIB = $(obj)lib$(VENDOR).a COBJS-$(CONFIG_FSL_PCI_INIT) += fsl_8xxx_pci.o COBJS-$(CONFIG_MPC8572) += fsl_8xxx_clk.o COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_clk.o +COBJS-$(CONFIG_P2020) += fsl_8xxx_clk.o COBJS-$(CONFIG_FSL_DDR2) += fsl_8xxx_ddr.o +COBJS-$(CONFIG_FSL_DDR3) += fsl_8xxx_ddr.o COBJS-$(CONFIG_MPC85xx) += fsl_8xxx_misc.o board.o COBJS-$(CONFIG_MPC86xx) += fsl_8xxx_misc.o board.o COBJS-$(CONFIG_NAND_ACTL) += actl_nand.o diff --git a/board/xes/common/fsl_8xxx_clk.c b/board/xes/common/fsl_8xxx_clk.c index f4a17b78c6..20d0a308b9 100644 --- a/board/xes/common/fsl_8xxx_clk.c +++ b/board/xes/common/fsl_8xxx_clk.c @@ -38,7 +38,11 @@ unsigned long get_board_sys_clk(ulong dummy) if (in_be32(&gur->gpporcr) & 0x10000) return 66666666; else +#ifdef CONFIG_P2020 + return 100000000; +#else return 50000000; +#endif } #ifdef CONFIG_MPC85xx @@ -54,6 +58,13 @@ unsigned long get_board_ddr_clk(ulong dummy) if (ddr_ratio == 0x7) return get_board_sys_clk(dummy); +#ifdef CONFIG_P2020 + if (in_be32(&gur->gpporcr) & 0x20000) + return 66666666; + else + return 100000000; +#else return 66666666; +#endif } #endif -- cgit