From 829e8c73dd75eb49c00a6916963ec7b0b1a771c5 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Mon, 21 Jan 2019 16:29:07 +0100 Subject: xilinx: common: Add support for DM_I2C zynq_board_read_rom_ethaddr() It is much easier to point to eeprom which stores information like MAC address directly via DT. eeprom which contains this information is pointed by /chosen/xlnx,eeprom parameter. For example: chosen { bootargs = "earlycon"; stdout-path = "serial0:115200n8"; + xlnx,eeprom = &eeprom; }; Signed-off-by: Michal Simek --- board/xilinx/common/board.c | 32 ++++++++++++++++++++++++++++++++ 1 file changed, 32 insertions(+) (limited to 'board/xilinx/common/board.c') diff --git a/board/xilinx/common/board.c b/board/xilinx/common/board.c index 7e813d8564..b14f530c72 100644 --- a/board/xilinx/common/board.c +++ b/board/xilinx/common/board.c @@ -8,6 +8,7 @@ #include #include +#if !defined(CONFIG_DM_I2C) int zynq_board_read_rom_ethaddr(unsigned char *ethaddr) { #if defined(CONFIG_ZYNQ_GEM_EEPROM_ADDR) && \ @@ -23,3 +24,34 @@ int zynq_board_read_rom_ethaddr(unsigned char *ethaddr) return 0; } + +#else +int zynq_board_read_rom_ethaddr(unsigned char *ethaddr) +{ + int ret = -EINVAL; + +#if defined(CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET) + struct udevice *dev; + ofnode eeprom; + + eeprom = ofnode_get_chosen_node("xlnx,eeprom"); + if (!ofnode_valid(eeprom)) + return -ENODEV; + + debug("%s: Path to EEPROM %s\n", __func__, + ofnode_get_chosen_prop("xlnx,eeprom")); + + ret = uclass_get_device_by_ofnode(UCLASS_I2C_EEPROM, eeprom, &dev); + if (ret) + return ret; + + ret = dm_i2c_read(dev, CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET, ethaddr, 6); + if (ret) + debug("%s: I2C EEPROM MAC address read failed\n", __func__); + else + debug("%s: I2C EEPROM MAC %pM\n", __func__, ethaddr); +#endif + + return ret; +} +#endif -- cgit