From fb90917c463ddbbc0538676a73d9ed305fa54322 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Sun, 20 Sep 2015 17:20:42 +0200 Subject: ARM64: zynqmp: Show information about bootmode Showing information about bootmode is very useful to make sure that correct bootmode is selected. Signed-off-by: Michal Simek --- board/xilinx/zynqmp/zynqmp.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'board/xilinx') diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index 6bdec205a7..9c176d01c4 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -82,22 +82,28 @@ int board_late_init(void) reg = readl(&crlapb_base->boot_mode); bootmode = reg & BOOT_MODES_MASK; + puts("Bootmode: "); switch (bootmode) { case JTAG_MODE: - setenv("modeboot", "netboot"); + puts("JTAG_MODE\n"); + setenv("modeboot", "jtagboot"); break; case QSPI_MODE_24BIT: case QSPI_MODE_32BIT: setenv("modeboot", "qspiboot"); + puts("QSPI_MODE\n"); break; case SD_MODE: case EMMC_MODE: + puts("SD_MODE\n"); setenv("modeboot", "sdboot"); break; case SD_MODE1: + puts("SD_MODE1\n"); setenv("modeboot", "sdboot1"); break; case NAND_MODE: + puts("NAND_MODE\n"); setenv("modeboot", "nandboot"); break; default: -- cgit