From a633a804a2a32693180ef156ed1a2dbc70b6d392 Mon Sep 17 00:00:00 2001 From: Michal Simek Date: Fri, 5 Jun 2020 11:45:12 +0200 Subject: trivial: Fix booot occurences s/booot/boot/g The first ase is booot instead of boot and second u-booot instead of u-boot. Signed-off-by: Michal Simek Reviewed-by: Jaehoon Chung --- board/freescale/p1010rdb/README.P1010RDB-PA | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'board') diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA index 46c61237c7..0cb950d845 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PA +++ b/board/freescale/p1010rdb/README.P1010RDB-PA @@ -88,7 +88,7 @@ Note: 1 stands for 'on', 0 stands for 'off' Setting of hwconfig =================== If FlexCAN or TDM is needed, please set "fsl_p1010mux:tdm_can=can" or -"fsl_p1010mux:tdm_can=tdm" explicitly in u-booot prompt as below for example: +"fsl_p1010mux:tdm_can=tdm" explicitly in u-boot prompt as below for example: setenv hwconfig "fsl_p1010mux:tdm_can=tdm;usb1:dr_mode=host,phy_type=utmi" By default, don't set fsl_p1010mux:tdm_can, in this case, spi chip selection is set to spi-flash instead of to SLIC/TDM/DAC and tdm_can_sel is set to TDM -- cgit