From 6b9cdb716f64d284046221e05bd10673c287bd05 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 5 Dec 2015 17:54:35 +0100 Subject: arm: socfpga: arria5-socdk: Remove Micrel PHY configuration The Micrel PHY configuration is now done from OF, so hard-coding the configuration into the board file is no longer necessary. Signed-off-by: Marek Vasut Cc: Joe Hershberger Cc: Chin Liang See Cc: Dinh Nguyen --- board/altera/arria5-socdk/socfpga.c | 40 ------------------------------------- 1 file changed, 40 deletions(-) (limited to 'board') diff --git a/board/altera/arria5-socdk/socfpga.c b/board/altera/arria5-socdk/socfpga.c index 0fbbc3456c..ccb1b4b063 100644 --- a/board/altera/arria5-socdk/socfpga.c +++ b/board/altera/arria5-socdk/socfpga.c @@ -12,10 +12,6 @@ #include #include -#include -#include -#include - DECLARE_GLOBAL_DATA_PTR; void s_init(void) {} @@ -31,42 +27,6 @@ int board_init(void) return 0; } -/* - * PHY configuration - */ -#ifdef CONFIG_PHY_MICREL_KSZ9021 -int board_phy_config(struct phy_device *phydev) -{ - int ret; - /* - * These skew settings for the KSZ9021 ethernet phy is required for ethernet - * to work reliably on most flavors of cyclone5 boards. - */ - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, - 0x0); - if (ret) - return ret; - - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, - 0x0); - if (ret) - return ret; - - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, - 0xf0f0); - if (ret) - return ret; - - if (phydev->drv->config) - return phydev->drv->config(phydev); - - return 0; -} -#endif - #ifdef CONFIG_USB_GADGET struct dwc2_plat_otg_data socfpga_otg_data = { .regs_otg = CONFIG_USB_DWC2_REG_ADDR, -- cgit From b5aaa03634a171d04824336b42790f3e77203bf2 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 5 Dec 2015 17:55:19 +0100 Subject: arm: socfpga: cyclone5-socdk: Remove Micrel PHY configuration The Micrel PHY configuration is now done from OF, so hard-coding the configuration into the board file is no longer necessary. Signed-off-by: Marek Vasut Cc: Joe Hershberger Cc: Chin Liang See Cc: Dinh Nguyen --- board/altera/cyclone5-socdk/socfpga.c | 40 ----------------------------------- 1 file changed, 40 deletions(-) (limited to 'board') diff --git a/board/altera/cyclone5-socdk/socfpga.c b/board/altera/cyclone5-socdk/socfpga.c index 0fbbc3456c..ccb1b4b063 100644 --- a/board/altera/cyclone5-socdk/socfpga.c +++ b/board/altera/cyclone5-socdk/socfpga.c @@ -12,10 +12,6 @@ #include #include -#include -#include -#include - DECLARE_GLOBAL_DATA_PTR; void s_init(void) {} @@ -31,42 +27,6 @@ int board_init(void) return 0; } -/* - * PHY configuration - */ -#ifdef CONFIG_PHY_MICREL_KSZ9021 -int board_phy_config(struct phy_device *phydev) -{ - int ret; - /* - * These skew settings for the KSZ9021 ethernet phy is required for ethernet - * to work reliably on most flavors of cyclone5 boards. - */ - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, - 0x0); - if (ret) - return ret; - - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, - 0x0); - if (ret) - return ret; - - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, - 0xf0f0); - if (ret) - return ret; - - if (phydev->drv->config) - return phydev->drv->config(phydev); - - return 0; -} -#endif - #ifdef CONFIG_USB_GADGET struct dwc2_plat_otg_data socfpga_otg_data = { .regs_otg = CONFIG_USB_DWC2_REG_ADDR, -- cgit From 5df93c556445940a5e96e511d11497db382a409a Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 5 Dec 2015 19:00:00 +0100 Subject: arm: socfpga: de0_nano: Remove Micrel PHY configuration The Micrel PHY configuration is now done from OF, so hard-coding the configuration into the board file is no longer necessary. Signed-off-by: Marek Vasut Cc: Joe Hershberger Cc: Chin Liang See Cc: Dinh Nguyen --- board/terasic/de0-nano-soc/socfpga.c | 50 ------------------------------------ 1 file changed, 50 deletions(-) (limited to 'board') diff --git a/board/terasic/de0-nano-soc/socfpga.c b/board/terasic/de0-nano-soc/socfpga.c index 85700b05be..3ccc2a7230 100644 --- a/board/terasic/de0-nano-soc/socfpga.c +++ b/board/terasic/de0-nano-soc/socfpga.c @@ -6,10 +6,6 @@ #include -#include -#include -#include - DECLARE_GLOBAL_DATA_PTR; void s_init(void) {} @@ -24,49 +20,3 @@ int board_init(void) return 0; } - -/* - * PHY configuration - */ -#ifdef CONFIG_PHY_MICREL_KSZ9031 -int board_phy_config(struct phy_device *phydev) -{ - int ret; - /* - * These skew settings for the KSZ9021 ethernet phy is required for ethernet - * to work reliably on most flavors of cyclone5 boards. - */ - ret = ksz9031_phy_extended_write(phydev, 0x2, - MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, - 0x70); - if (ret) - return ret; - - ret = ksz9031_phy_extended_write(phydev, 0x2, - MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, - 0x7777); - if (ret) - return ret; - - ret = ksz9031_phy_extended_write(phydev, 0x2, - MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, - 0); - if (ret) - return ret; - - ret = ksz9031_phy_extended_write(phydev, 0x2, - MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, - MII_KSZ9031_MOD_DATA_NO_POST_INC, - 0x03FC); - if (ret) - return ret; - - if (phydev->drv->config) - return phydev->drv->config(phydev); - - return 0; -} -#endif -- cgit From 1f5f18717254d6d0c0758580980ff096a8587b9d Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 5 Dec 2015 17:55:54 +0100 Subject: arm: socfpga: sockit: Remove Micrel PHY configuration The Micrel PHY configuration is now done from OF, so hard-coding the configuration into the board file is no longer necessary. Signed-off-by: Marek Vasut Cc: Joe Hershberger Cc: Chin Liang See Cc: Dinh Nguyen --- board/terasic/sockit/socfpga.c | 40 ---------------------------------------- 1 file changed, 40 deletions(-) (limited to 'board') diff --git a/board/terasic/sockit/socfpga.c b/board/terasic/sockit/socfpga.c index 0fbbc3456c..ccb1b4b063 100644 --- a/board/terasic/sockit/socfpga.c +++ b/board/terasic/sockit/socfpga.c @@ -12,10 +12,6 @@ #include #include -#include -#include -#include - DECLARE_GLOBAL_DATA_PTR; void s_init(void) {} @@ -31,42 +27,6 @@ int board_init(void) return 0; } -/* - * PHY configuration - */ -#ifdef CONFIG_PHY_MICREL_KSZ9021 -int board_phy_config(struct phy_device *phydev) -{ - int ret; - /* - * These skew settings for the KSZ9021 ethernet phy is required for ethernet - * to work reliably on most flavors of cyclone5 boards. - */ - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, - 0x0); - if (ret) - return ret; - - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, - 0x0); - if (ret) - return ret; - - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, - 0xf0f0); - if (ret) - return ret; - - if (phydev->drv->config) - return phydev->drv->config(phydev); - - return 0; -} -#endif - #ifdef CONFIG_USB_GADGET struct dwc2_plat_otg_data socfpga_otg_data = { .regs_otg = CONFIG_USB_DWC2_REG_ADDR, -- cgit From faed7ac8fa0f94c23cfef20684a268891a1a9fd2 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 5 Dec 2015 17:55:36 +0100 Subject: arm: socfpga: socrates: Remove Micrel PHY configuration The Micrel PHY configuration is now done from OF, so hard-coding the configuration into the board file is no longer necessary. Signed-off-by: Marek Vasut Cc: Joe Hershberger Cc: Chin Liang See Cc: Dinh Nguyen --- board/ebv/socrates/socfpga.c | 40 ---------------------------------------- 1 file changed, 40 deletions(-) (limited to 'board') diff --git a/board/ebv/socrates/socfpga.c b/board/ebv/socrates/socfpga.c index 0fbbc3456c..ccb1b4b063 100644 --- a/board/ebv/socrates/socfpga.c +++ b/board/ebv/socrates/socfpga.c @@ -12,10 +12,6 @@ #include #include -#include -#include -#include - DECLARE_GLOBAL_DATA_PTR; void s_init(void) {} @@ -31,42 +27,6 @@ int board_init(void) return 0; } -/* - * PHY configuration - */ -#ifdef CONFIG_PHY_MICREL_KSZ9021 -int board_phy_config(struct phy_device *phydev) -{ - int ret; - /* - * These skew settings for the KSZ9021 ethernet phy is required for ethernet - * to work reliably on most flavors of cyclone5 boards. - */ - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, - 0x0); - if (ret) - return ret; - - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, - 0x0); - if (ret) - return ret; - - ret = ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, - 0xf0f0); - if (ret) - return ret; - - if (phydev->drv->config) - return phydev->drv->config(phydev); - - return 0; -} -#endif - #ifdef CONFIG_USB_GADGET struct dwc2_plat_otg_data socfpga_otg_data = { .regs_otg = CONFIG_USB_DWC2_REG_ADDR, -- cgit From 70311e69fa7f0b7c289eb6552ccc3f9fb7320c69 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 5 Dec 2015 19:24:22 +0100 Subject: arm: socfpga: arria5-socdk: Probe DWC2 UDC from OF instead of hard-coded data This patch adds the necessary OF alias for the UDC node, which let's the code locate the DWC2 UDC base address in OF instead of hard-coding it into the U-Boot binary. The code is adjusted to use the address from OF instead of the hard-coded one. Finally, the hard-coded address is removed and USB DM support is enabled. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen Cc: Lukasz Majewski Cc: Lukasz Majewski --- board/altera/arria5-socdk/socfpga.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'board') diff --git a/board/altera/arria5-socdk/socfpga.c b/board/altera/arria5-socdk/socfpga.c index ccb1b4b063..449f3b5d50 100644 --- a/board/altera/arria5-socdk/socfpga.c +++ b/board/altera/arria5-socdk/socfpga.c @@ -5,12 +5,12 @@ */ #include +#include #include #include #include #include -#include DECLARE_GLOBAL_DATA_PTR; @@ -29,12 +29,29 @@ int board_init(void) #ifdef CONFIG_USB_GADGET struct dwc2_plat_otg_data socfpga_otg_data = { - .regs_otg = CONFIG_USB_DWC2_REG_ADDR, .usb_gusbcfg = 0x1417, }; int board_usb_init(int index, enum usb_init_type init) { + int node[2], count; + fdt_addr_t addr; + + count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc", + COMPAT_ALTERA_SOCFPGA_DWC2USB, + node, 2); + if (count <= 0) /* No controller found. */ + return 0; + + addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg"); + if (addr == FDT_ADDR_T_NONE) { + printf("UDC Controller has no 'reg' property!\n"); + return -EINVAL; + } + + /* Patch the address from OF into the controller pdata. */ + socfpga_otg_data.regs_otg = addr; + return dwc2_udc_probe(&socfpga_otg_data); } -- cgit From c90ada94fba5486d4b4d3773013804982ccadb56 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 5 Dec 2015 19:24:22 +0100 Subject: arm: socfpga: cyclone5-socdk: Probe DWC2 UDC from OF instead of hard-coded data This patch adds the necessary OF alias for the UDC node, which let's the code locate the DWC2 UDC base address in OF instead of hard-coding it into the U-Boot binary. The code is adjusted to use the address from OF instead of the hard-coded one. Finally, the hard-coded address is removed and USB DM support is enabled. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen Cc: Lukasz Majewski Cc: Lukasz Majewski --- board/altera/cyclone5-socdk/socfpga.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'board') diff --git a/board/altera/cyclone5-socdk/socfpga.c b/board/altera/cyclone5-socdk/socfpga.c index ccb1b4b063..449f3b5d50 100644 --- a/board/altera/cyclone5-socdk/socfpga.c +++ b/board/altera/cyclone5-socdk/socfpga.c @@ -5,12 +5,12 @@ */ #include +#include #include #include #include #include -#include DECLARE_GLOBAL_DATA_PTR; @@ -29,12 +29,29 @@ int board_init(void) #ifdef CONFIG_USB_GADGET struct dwc2_plat_otg_data socfpga_otg_data = { - .regs_otg = CONFIG_USB_DWC2_REG_ADDR, .usb_gusbcfg = 0x1417, }; int board_usb_init(int index, enum usb_init_type init) { + int node[2], count; + fdt_addr_t addr; + + count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc", + COMPAT_ALTERA_SOCFPGA_DWC2USB, + node, 2); + if (count <= 0) /* No controller found. */ + return 0; + + addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg"); + if (addr == FDT_ADDR_T_NONE) { + printf("UDC Controller has no 'reg' property!\n"); + return -EINVAL; + } + + /* Patch the address from OF into the controller pdata. */ + socfpga_otg_data.regs_otg = addr; + return dwc2_udc_probe(&socfpga_otg_data); } -- cgit From 9368aa6a680f150755a233be9f97956bba5a915e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 5 Dec 2015 19:24:22 +0100 Subject: arm: socfpga: mcvevk: Probe DWC2 UDC from OF instead of hard-coded data This patch adds the necessary OF alias for the UDC node, which let's the code locate the DWC2 UDC base address in OF instead of hard-coding it into the U-Boot binary. The code is adjusted to use the address from OF instead of the hard-coded one. Finally, the hard-coded address is removed and USB DM support is enabled. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen Cc: Lukasz Majewski Cc: Lukasz Majewski --- board/denx/mcvevk/socfpga.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'board') diff --git a/board/denx/mcvevk/socfpga.c b/board/denx/mcvevk/socfpga.c index 0f93722dfb..d77d7ad4f7 100644 --- a/board/denx/mcvevk/socfpga.c +++ b/board/denx/mcvevk/socfpga.c @@ -5,12 +5,12 @@ */ #include +#include #include #include #include #include -#include DECLARE_GLOBAL_DATA_PTR; @@ -29,12 +29,29 @@ int board_init(void) #ifdef CONFIG_USB_GADGET struct dwc2_plat_otg_data socfpga_otg_data = { - .regs_otg = CONFIG_USB_DWC2_REG_ADDR, .usb_gusbcfg = 0x1417, }; int board_usb_init(int index, enum usb_init_type init) { + int node[2], count; + fdt_addr_t addr; + + count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc", + COMPAT_ALTERA_SOCFPGA_DWC2USB, + node, 2); + if (count <= 0) /* No controller found. */ + return 0; + + addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg"); + if (addr == FDT_ADDR_T_NONE) { + printf("UDC Controller has no 'reg' property!\n"); + return -EINVAL; + } + + /* Patch the address from OF into the controller pdata. */ + socfpga_otg_data.regs_otg = addr; + return dwc2_udc_probe(&socfpga_otg_data); } -- cgit From 225217da2804d1c61725e2974262bd2f27882cd7 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 5 Dec 2015 19:24:22 +0100 Subject: arm: socfpga: sockit: Probe DWC2 UDC from OF instead of hard-coded data This patch adds the necessary OF alias for the UDC node, which let's the code locate the DWC2 UDC base address in OF instead of hard-coding it into the U-Boot binary. The code is adjusted to use the address from OF instead of the hard-coded one. Finally, the hard-coded address is removed and USB DM support is enabled. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen Cc: Lukasz Majewski Cc: Lukasz Majewski --- board/terasic/sockit/socfpga.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'board') diff --git a/board/terasic/sockit/socfpga.c b/board/terasic/sockit/socfpga.c index ccb1b4b063..1fe8c1cbf9 100644 --- a/board/terasic/sockit/socfpga.c +++ b/board/terasic/sockit/socfpga.c @@ -5,12 +5,12 @@ */ #include +#include #include #include #include #include -#include DECLARE_GLOBAL_DATA_PTR; @@ -29,12 +29,29 @@ int board_init(void) #ifdef CONFIG_USB_GADGET struct dwc2_plat_otg_data socfpga_otg_data = { - .regs_otg = CONFIG_USB_DWC2_REG_ADDR, .usb_gusbcfg = 0x1417, }; int board_usb_init(int index, enum usb_init_type init) { + int node[2], count; + fdt_addr_t addr; + + count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc", + COMPAT_ALTERA_SOCFPGA_DWC2USB, + node, 2); + if (count <= 0) /* No controller found. */ + return -EINVAL; + + addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg"); + if (addr == FDT_ADDR_T_NONE) { + printf("UDC Controller has no 'reg' property!\n"); + return -EINVAL; + } + + /* Patch the address from OF into the controller pdata. */ + socfpga_otg_data.regs_otg = addr; + return dwc2_udc_probe(&socfpga_otg_data); } -- cgit From b5a5d2bd967781818ab1eadcd3ce779d01676e2e Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 5 Dec 2015 19:24:22 +0100 Subject: arm: socfpga: socrates: Probe DWC2 UDC from OF instead of hard-coded data This patch adds the necessary OF alias for the UDC node, which let's the code locate the DWC2 UDC base address in OF instead of hard-coding it into the U-Boot binary. The code is adjusted to use the address from OF instead of the hard-coded one. Finally, the hard-coded address is removed and USB DM support is enabled. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen Cc: Lukasz Majewski Cc: Lukasz Majewski --- board/ebv/socrates/socfpga.c | 21 +++++++++++++++++++-- 1 file changed, 19 insertions(+), 2 deletions(-) (limited to 'board') diff --git a/board/ebv/socrates/socfpga.c b/board/ebv/socrates/socfpga.c index ccb1b4b063..449f3b5d50 100644 --- a/board/ebv/socrates/socfpga.c +++ b/board/ebv/socrates/socfpga.c @@ -5,12 +5,12 @@ */ #include +#include #include #include #include #include -#include DECLARE_GLOBAL_DATA_PTR; @@ -29,12 +29,29 @@ int board_init(void) #ifdef CONFIG_USB_GADGET struct dwc2_plat_otg_data socfpga_otg_data = { - .regs_otg = CONFIG_USB_DWC2_REG_ADDR, .usb_gusbcfg = 0x1417, }; int board_usb_init(int index, enum usb_init_type init) { + int node[2], count; + fdt_addr_t addr; + + count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc", + COMPAT_ALTERA_SOCFPGA_DWC2USB, + node, 2); + if (count <= 0) /* No controller found. */ + return 0; + + addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg"); + if (addr == FDT_ADDR_T_NONE) { + printf("UDC Controller has no 'reg' property!\n"); + return -EINVAL; + } + + /* Patch the address from OF into the controller pdata. */ + socfpga_otg_data.regs_otg = addr; + return dwc2_udc_probe(&socfpga_otg_data); } -- cgit From dbd6fcfbe2331b953784ba972f66cb3df3e50ab2 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Sat, 5 Dec 2015 21:10:44 +0100 Subject: arm: socfpga: Drop the board boilerplate Drop all the common board code, since it is not completely useless. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen --- board/altera/arria5-socdk/socfpga.c | 56 ----------------------------------- board/altera/cyclone5-socdk/socfpga.c | 56 ----------------------------------- board/denx/mcvevk/socfpga.c | 56 ----------------------------------- board/ebv/socrates/socfpga.c | 56 ----------------------------------- board/sr1500/socfpga.c | 17 ----------- board/terasic/de0-nano-soc/socfpga.c | 16 ---------- board/terasic/sockit/socfpga.c | 56 ----------------------------------- 7 files changed, 313 deletions(-) (limited to 'board') diff --git a/board/altera/arria5-socdk/socfpga.c b/board/altera/arria5-socdk/socfpga.c index 449f3b5d50..97fb902f8e 100644 --- a/board/altera/arria5-socdk/socfpga.c +++ b/board/altera/arria5-socdk/socfpga.c @@ -3,60 +3,4 @@ * * SPDX-License-Identifier: GPL-2.0+ */ - #include -#include -#include -#include - -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -void s_init(void) {} - -/* - * Miscellaneous platform dependent initialisations - */ -int board_init(void) -{ - /* Address of boot parameters for ATAG (if ATAG is used) */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} - -#ifdef CONFIG_USB_GADGET -struct dwc2_plat_otg_data socfpga_otg_data = { - .usb_gusbcfg = 0x1417, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - int node[2], count; - fdt_addr_t addr; - - count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc", - COMPAT_ALTERA_SOCFPGA_DWC2USB, - node, 2); - if (count <= 0) /* No controller found. */ - return 0; - - addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg"); - if (addr == FDT_ADDR_T_NONE) { - printf("UDC Controller has no 'reg' property!\n"); - return -EINVAL; - } - - /* Patch the address from OF into the controller pdata. */ - socfpga_otg_data.regs_otg = addr; - - return dwc2_udc_probe(&socfpga_otg_data); -} - -int g_dnl_board_usb_cable_connected(void) -{ - return 1; -} -#endif diff --git a/board/altera/cyclone5-socdk/socfpga.c b/board/altera/cyclone5-socdk/socfpga.c index 449f3b5d50..97fb902f8e 100644 --- a/board/altera/cyclone5-socdk/socfpga.c +++ b/board/altera/cyclone5-socdk/socfpga.c @@ -3,60 +3,4 @@ * * SPDX-License-Identifier: GPL-2.0+ */ - #include -#include -#include -#include - -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -void s_init(void) {} - -/* - * Miscellaneous platform dependent initialisations - */ -int board_init(void) -{ - /* Address of boot parameters for ATAG (if ATAG is used) */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} - -#ifdef CONFIG_USB_GADGET -struct dwc2_plat_otg_data socfpga_otg_data = { - .usb_gusbcfg = 0x1417, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - int node[2], count; - fdt_addr_t addr; - - count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc", - COMPAT_ALTERA_SOCFPGA_DWC2USB, - node, 2); - if (count <= 0) /* No controller found. */ - return 0; - - addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg"); - if (addr == FDT_ADDR_T_NONE) { - printf("UDC Controller has no 'reg' property!\n"); - return -EINVAL; - } - - /* Patch the address from OF into the controller pdata. */ - socfpga_otg_data.regs_otg = addr; - - return dwc2_udc_probe(&socfpga_otg_data); -} - -int g_dnl_board_usb_cable_connected(void) -{ - return 1; -} -#endif diff --git a/board/denx/mcvevk/socfpga.c b/board/denx/mcvevk/socfpga.c index d77d7ad4f7..6be58f047f 100644 --- a/board/denx/mcvevk/socfpga.c +++ b/board/denx/mcvevk/socfpga.c @@ -3,60 +3,4 @@ * * SPDX-License-Identifier: GPL-2.0+ */ - #include -#include -#include -#include - -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -void s_init(void) {} - -/* - * Miscellaneous platform dependent initialisations - */ -int board_init(void) -{ - /* Address of boot parameters for ATAG (if ATAG is used) */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} - -#ifdef CONFIG_USB_GADGET -struct dwc2_plat_otg_data socfpga_otg_data = { - .usb_gusbcfg = 0x1417, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - int node[2], count; - fdt_addr_t addr; - - count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc", - COMPAT_ALTERA_SOCFPGA_DWC2USB, - node, 2); - if (count <= 0) /* No controller found. */ - return 0; - - addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg"); - if (addr == FDT_ADDR_T_NONE) { - printf("UDC Controller has no 'reg' property!\n"); - return -EINVAL; - } - - /* Patch the address from OF into the controller pdata. */ - socfpga_otg_data.regs_otg = addr; - - return dwc2_udc_probe(&socfpga_otg_data); -} - -int g_dnl_board_usb_cable_connected(void) -{ - return 1; -} -#endif diff --git a/board/ebv/socrates/socfpga.c b/board/ebv/socrates/socfpga.c index 449f3b5d50..97fb902f8e 100644 --- a/board/ebv/socrates/socfpga.c +++ b/board/ebv/socrates/socfpga.c @@ -3,60 +3,4 @@ * * SPDX-License-Identifier: GPL-2.0+ */ - #include -#include -#include -#include - -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -void s_init(void) {} - -/* - * Miscellaneous platform dependent initialisations - */ -int board_init(void) -{ - /* Address of boot parameters for ATAG (if ATAG is used) */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} - -#ifdef CONFIG_USB_GADGET -struct dwc2_plat_otg_data socfpga_otg_data = { - .usb_gusbcfg = 0x1417, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - int node[2], count; - fdt_addr_t addr; - - count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc", - COMPAT_ALTERA_SOCFPGA_DWC2USB, - node, 2); - if (count <= 0) /* No controller found. */ - return 0; - - addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg"); - if (addr == FDT_ADDR_T_NONE) { - printf("UDC Controller has no 'reg' property!\n"); - return -EINVAL; - } - - /* Patch the address from OF into the controller pdata. */ - socfpga_otg_data.regs_otg = addr; - - return dwc2_udc_probe(&socfpga_otg_data); -} - -int g_dnl_board_usb_cable_connected(void) -{ - return 1; -} -#endif diff --git a/board/sr1500/socfpga.c b/board/sr1500/socfpga.c index 9f895842f7..617dffa136 100644 --- a/board/sr1500/socfpga.c +++ b/board/sr1500/socfpga.c @@ -5,27 +5,10 @@ */ #include -#include -#include #include #include #include -DECLARE_GLOBAL_DATA_PTR; - -void s_init(void) {} - -/* - * Miscellaneous platform dependent initialisations - */ -int board_init(void) -{ - /* Address of boot parameters for ATAG (if ATAG is used) */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} - int board_early_init_f(void) { int ret; diff --git a/board/terasic/de0-nano-soc/socfpga.c b/board/terasic/de0-nano-soc/socfpga.c index 3ccc2a7230..97fb902f8e 100644 --- a/board/terasic/de0-nano-soc/socfpga.c +++ b/board/terasic/de0-nano-soc/socfpga.c @@ -3,20 +3,4 @@ * * SPDX-License-Identifier: GPL-2.0+ */ - #include - -DECLARE_GLOBAL_DATA_PTR; - -void s_init(void) {} - -/* - * Miscellaneous platform dependent initialisations - */ -int board_init(void) -{ - /* Address of boot parameters for ATAG (if ATAG is used) */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} diff --git a/board/terasic/sockit/socfpga.c b/board/terasic/sockit/socfpga.c index 1fe8c1cbf9..97fb902f8e 100644 --- a/board/terasic/sockit/socfpga.c +++ b/board/terasic/sockit/socfpga.c @@ -3,60 +3,4 @@ * * SPDX-License-Identifier: GPL-2.0+ */ - #include -#include -#include -#include - -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -void s_init(void) {} - -/* - * Miscellaneous platform dependent initialisations - */ -int board_init(void) -{ - /* Address of boot parameters for ATAG (if ATAG is used) */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} - -#ifdef CONFIG_USB_GADGET -struct dwc2_plat_otg_data socfpga_otg_data = { - .usb_gusbcfg = 0x1417, -}; - -int board_usb_init(int index, enum usb_init_type init) -{ - int node[2], count; - fdt_addr_t addr; - - count = fdtdec_find_aliases_for_id(gd->fdt_blob, "udc", - COMPAT_ALTERA_SOCFPGA_DWC2USB, - node, 2); - if (count <= 0) /* No controller found. */ - return -EINVAL; - - addr = fdtdec_get_addr(gd->fdt_blob, node[0], "reg"); - if (addr == FDT_ADDR_T_NONE) { - printf("UDC Controller has no 'reg' property!\n"); - return -EINVAL; - } - - /* Patch the address from OF into the controller pdata. */ - socfpga_otg_data.regs_otg = addr; - - return dwc2_udc_probe(&socfpga_otg_data); -} - -int g_dnl_board_usb_cable_connected(void) -{ - return 1; -} -#endif -- cgit