From e9a20f8a198c11a4108ca4b4deef8398f0cd93aa Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Fri, 6 Mar 2020 11:14:03 +0100 Subject: ram: stm32mp1: increase vdd2_ddr: buck2 for 32bits LPDDR Need to increase the LPDDR2/LPDDR3 the voltage vdd2_ddr: buck2 form 1.2V to 1.25V for 32bits configuration. Signed-off-by: Patrick Delaunay Acked-by: Patrice Chotard --- board/st/stm32mp1/board.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'board') diff --git a/board/st/stm32mp1/board.c b/board/st/stm32mp1/board.c index c3d832f584..4e35d36c76 100644 --- a/board/st/stm32mp1/board.c +++ b/board/st/stm32mp1/board.c @@ -43,6 +43,7 @@ int board_ddr_power_init(enum ddr_type ddr_type) struct udevice *dev; bool buck3_at_1800000v = false; int ret; + u32 buck2; ret = uclass_get_device_by_driver(UCLASS_PMIC, DM_GET_DRIVER(pmic_stpmic1), &dev); @@ -102,8 +103,10 @@ int board_ddr_power_init(enum ddr_type ddr_type) break; - case STM32MP_LPDDR2: - case STM32MP_LPDDR3: + case STM32MP_LPDDR2_16: + case STM32MP_LPDDR2_32: + case STM32MP_LPDDR3_16: + case STM32MP_LPDDR3_32: /* * configure VDD_DDR1 = LDO3 * Set LDO3 to 1.8V @@ -133,11 +136,23 @@ int board_ddr_power_init(enum ddr_type ddr_type) if (ret < 0) return ret; - /* VDD_DDR2 : Set BUCK2 to 1.2V */ + /* VDD_DDR2 : Set BUCK2 to 1.2V (16bits) or 1.25V (32 bits)*/ + switch (ddr_type) { + case STM32MP_LPDDR2_32: + case STM32MP_LPDDR3_32: + buck2 = STPMIC1_BUCK2_1250000V; + break; + default: + case STM32MP_LPDDR2_16: + case STM32MP_LPDDR3_16: + buck2 = STPMIC1_BUCK2_1200000V; + break; + } + ret = pmic_clrsetbits(dev, STPMIC1_BUCKX_MAIN_CR(STPMIC1_BUCK2), STPMIC1_BUCK_VOUT_MASK, - STPMIC1_BUCK2_1200000V); + buck2); if (ret < 0) return ret; -- cgit