From a1f6d04aa1f41f5ebcec95a37b4dc54b9c7f98c5 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Fri, 22 May 2020 01:13:54 +0200 Subject: ARM: imx: soc: Select default TEXT_BASE for MX7 Select default U-Boot and SPL text base for the MX7 SoC. The U-Boot text base is picked as the one used by various MX7 boards. The SPL text base however is different. The SPL text base is set to 0x912000 instead of the usual 0x911000, that is because the 0x911000 value cannot work. Using 0x911000 as a SPL text base will result in the DCD header being placed below the 0x911000 address, which is a reserved SRAM area which must not be used. This will actually trigger eMMC boot failure on MX7D at least. Hence the increment. Update all boards affected by this SPL problem to the new SPL_TEXT_BASE. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: NXP i.MX U-Boot Team Cc: Peng Fan Cc: Stefano Babic --- configs/pico-nymph-imx7d_defconfig | 2 -- 1 file changed, 2 deletions(-) (limited to 'configs/pico-nymph-imx7d_defconfig') diff --git a/configs/pico-nymph-imx7d_defconfig b/configs/pico-nymph-imx7d_defconfig index 8a1e15de65..07b17f52ec 100644 --- a/configs/pico-nymph-imx7d_defconfig +++ b/configs/pico-nymph-imx7d_defconfig @@ -1,6 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_MX7=y -CONFIG_SYS_TEXT_BASE=0x87800000 CONFIG_SPL_GPIO_SUPPORT=y CONFIG_SPL_LIBCOMMON_SUPPORT=y CONFIG_SPL_LIBGENERIC_SUPPORT=y @@ -15,7 +14,6 @@ CONFIG_SPL=y CONFIG_ARMV7_BOOT_SEC_DEFAULT=y CONFIG_IMX_RDC=y CONFIG_IMX_BOOTAUX=y -CONFIG_SPL_TEXT_BASE=0x00911000 CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg" CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd" -- cgit