From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- cpu/mcf52x2/cpu.c | 14 +- cpu/mcf52x2/cpu_init.c | 356 +++++++++++++++++++++++------------------------ cpu/mcf52x2/interrupts.c | 14 +- cpu/mcf52x2/speed.c | 12 +- cpu/mcf52x2/start.S | 76 +++++----- 5 files changed, 236 insertions(+), 236 deletions(-) (limited to 'cpu/mcf52x2') diff --git a/cpu/mcf52x2/cpu.c b/cpu/mcf52x2/cpu.c index c25670d412..32d6c40da0 100644 --- a/cpu/mcf52x2/cpu.c +++ b/cpu/mcf52x2/cpu.c @@ -66,11 +66,11 @@ int checkcpu(void) if (cpu_model) printf("CPU: Freescale ColdFire MCF%s rev. %hu, at %s MHz\n", - cpu_model, prn, strmhz(buf, CFG_CLK)); + cpu_model, prn, strmhz(buf, CONFIG_SYS_CLK)); else printf("CPU: Unknown - Freescale ColdFire MCF5271 family" " (PIN: 0x%x) rev. %hu, at %s MHz\n", - pin, prn, strmhz(buf, CFG_CLK)); + pin, prn, strmhz(buf, CONFIG_SYS_CLK)); return 0; } @@ -174,7 +174,7 @@ int watchdog_init(void) /* set timeout and enable watchdog */ wdt->wdog_wrrr = - ((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1; + ((CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000)) - 1; wdt->wdog_wcr = 0; /* reset watchdog counter */ puts("WATCHDOG:enabled\n"); @@ -202,7 +202,7 @@ int checkcpu(void) char buf[32]; printf("CPU: Freescale Coldfire MCF5275 at %s MHz\n", - strmhz(buf, CFG_CLK)); + strmhz(buf, CONFIG_SYS_CLK)); return 0; }; @@ -236,7 +236,7 @@ int watchdog_init(void) /* set timeout and enable watchdog */ wdt->wmr = - ((CONFIG_WATCHDOG_TIMEOUT * CFG_HZ) / (32768 * 1000)) - 1; + ((CONFIG_WATCHDOG_TIMEOUT * CONFIG_SYS_HZ) / (32768 * 1000)) - 1; wdt->wsr = 0x5555; /* reset watchdog counter */ wdt->wsr = 0xAAAA; @@ -278,7 +278,7 @@ int checkcpu(void) char buf[32]; printf("CPU: Freescale Coldfire MCF5249 at %s MHz\n", - strmhz(buf, CFG_CLK)); + strmhz(buf, CONFIG_SYS_CLK)); return 0; } @@ -300,7 +300,7 @@ int checkcpu(void) unsigned char resetsource = mbar_readLong(SIM_RSR); printf("CPU: Freescale Coldfire MCF5253 at %s MHz\n", - strmhz(buf, CFG_CLK)); + strmhz(buf, CONFIG_SYS_CLK)); if ((resetsource & SIM_RSR_HRST) || (resetsource & SIM_RSR_SWTR)) { printf("Reset:%s%s\n", diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 68aefe9151..7bb358e63f 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -72,20 +72,20 @@ void cpu_init_f(void) * Setup chip selects... */ - mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1); - mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1); - mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1); + mbar_writeShort(MCFSIM_CSAR1, CONFIG_SYS_CSAR1); + mbar_writeShort(MCFSIM_CSCR1, CONFIG_SYS_CSCR1); + mbar_writeLong(MCFSIM_CSMR1, CONFIG_SYS_CSMR1); - mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0); - mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0); - mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0); + mbar_writeShort(MCFSIM_CSAR0, CONFIG_SYS_CSAR0); + mbar_writeShort(MCFSIM_CSCR0, CONFIG_SYS_CSCR0); + mbar_writeLong(MCFSIM_CSMR0, CONFIG_SYS_CSMR0); #ifdef CONFIG_FSL_I2C - CFG_I2C_PINMUX_REG = CFG_I2C_PINMUX_REG & CFG_I2C_PINMUX_CLR; - CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET; -#ifdef CFG_I2C2_OFFSET - CFG_I2C2_PINMUX_REG &= CFG_I2C2_PINMUX_CLR; - CFG_I2C2_PINMUX_REG |= CFG_I2C2_PINMUX_SET; + CONFIG_SYS_I2C_PINMUX_REG = CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR; + CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET; +#ifdef CONFIG_SYS_I2C2_OFFSET + CONFIG_SYS_I2C2_PINMUX_REG &= CONFIG_SYS_I2C2_PINMUX_CLR; + CONFIG_SYS_I2C2_PINMUX_REG |= CONFIG_SYS_I2C2_PINMUX_SET; #endif #endif @@ -102,7 +102,7 @@ int cpu_init_r(void) void uart_port_conf(void) { /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: break; case 1: @@ -138,7 +138,7 @@ int cpu_init_r(void) void uart_port_conf(void) { /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD | MCF_GPIO_PAR_UART_U0RXD); @@ -169,59 +169,59 @@ void cpu_init_f(void) * already initialized. */ #ifndef CONFIG_MONITOR_IS_IN_RAM - volatile sysctrl_t *sysctrl = (sysctrl_t *) (CFG_MBAR); + volatile sysctrl_t *sysctrl = (sysctrl_t *) (CONFIG_SYS_MBAR); volatile gpio_t *gpio = (gpio_t *) (MMAP_GPIO); volatile csctrl_t *csctrl = (csctrl_t *) (MMAP_FBCS); - sysctrl->sc_scr = CFG_SCR; - sysctrl->sc_spr = CFG_SPR; + sysctrl->sc_scr = CONFIG_SYS_SCR; + sysctrl->sc_spr = CONFIG_SYS_SPR; /* Setup Ports: */ - gpio->gpio_pacnt = CFG_PACNT; - gpio->gpio_paddr = CFG_PADDR; - gpio->gpio_padat = CFG_PADAT; - gpio->gpio_pbcnt = CFG_PBCNT; - gpio->gpio_pbddr = CFG_PBDDR; - gpio->gpio_pbdat = CFG_PBDAT; - gpio->gpio_pdcnt = CFG_PDCNT; + gpio->gpio_pacnt = CONFIG_SYS_PACNT; + gpio->gpio_paddr = CONFIG_SYS_PADDR; + gpio->gpio_padat = CONFIG_SYS_PADAT; + gpio->gpio_pbcnt = CONFIG_SYS_PBCNT; + gpio->gpio_pbddr = CONFIG_SYS_PBDDR; + gpio->gpio_pbdat = CONFIG_SYS_PBDAT; + gpio->gpio_pdcnt = CONFIG_SYS_PDCNT; /* Memory Controller: */ - csctrl->cs_br0 = CFG_BR0_PRELIM; - csctrl->cs_or0 = CFG_OR0_PRELIM; + csctrl->cs_br0 = CONFIG_SYS_BR0_PRELIM; + csctrl->cs_or0 = CONFIG_SYS_OR0_PRELIM; -#if (defined(CFG_OR1_PRELIM) && defined(CFG_BR1_PRELIM)) - csctrl->cs_br1 = CFG_BR1_PRELIM; - csctrl->cs_or1 = CFG_OR1_PRELIM; +#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM)) + csctrl->cs_br1 = CONFIG_SYS_BR1_PRELIM; + csctrl->cs_or1 = CONFIG_SYS_OR1_PRELIM; #endif -#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM) - csctrl->cs_br2 = CFG_BR2_PRELIM; - csctrl->cs_or2 = CFG_OR2_PRELIM; +#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) + csctrl->cs_br2 = CONFIG_SYS_BR2_PRELIM; + csctrl->cs_or2 = CONFIG_SYS_OR2_PRELIM; #endif -#if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM) - csctrl->cs_br3 = CFG_BR3_PRELIM; - csctrl->cs_or3 = CFG_OR3_PRELIM; +#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM) + csctrl->cs_br3 = CONFIG_SYS_BR3_PRELIM; + csctrl->cs_or3 = CONFIG_SYS_OR3_PRELIM; #endif -#if defined(CFG_OR4_PRELIM) && defined(CFG_BR4_PRELIM) - csctrl->cs_br4 = CFG_BR4_PRELIM; - csctrl->cs_or4 = CFG_OR4_PRELIM; +#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM) + csctrl->cs_br4 = CONFIG_SYS_BR4_PRELIM; + csctrl->cs_or4 = CONFIG_SYS_OR4_PRELIM; #endif -#if defined(CFG_OR5_PRELIM) && defined(CFG_BR5_PRELIM) - csctrl->cs_br5 = CFG_BR5_PRELIM; - csctrl->cs_or5 = CFG_OR5_PRELIM; +#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM) + csctrl->cs_br5 = CONFIG_SYS_BR5_PRELIM; + csctrl->cs_or5 = CONFIG_SYS_OR5_PRELIM; #endif -#if defined(CFG_OR6_PRELIM) && defined(CFG_BR6_PRELIM) - csctrl->cs_br6 = CFG_BR6_PRELIM; - csctrl->cs_or6 = CFG_OR6_PRELIM; +#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM) + csctrl->cs_br6 = CONFIG_SYS_BR6_PRELIM; + csctrl->cs_or6 = CONFIG_SYS_OR6_PRELIM; #endif -#if defined(CFG_OR7_PRELIM) && defined(CFG_BR7_PRELIM) - csctrl->cs_br7 = CFG_BR7_PRELIM; - csctrl->cs_or7 = CFG_OR7_PRELIM; +#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM) + csctrl->cs_br7 = CONFIG_SYS_BR7_PRELIM; + csctrl->cs_or7 = CONFIG_SYS_OR7_PRELIM; #endif #endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ @@ -244,7 +244,7 @@ void uart_port_conf(void) volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: gpio->gpio_pbcnt &= ~(GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK); gpio->gpio_pbcnt |= (GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD); @@ -282,57 +282,57 @@ void cpu_init_f(void) /* Memory Controller: */ /* Flash */ - csctrl_reg->ar0 = CFG_AR0_PRELIM; - csctrl_reg->cr0 = CFG_CR0_PRELIM; - csctrl_reg->mr0 = CFG_MR0_PRELIM; + csctrl_reg->ar0 = CONFIG_SYS_AR0_PRELIM; + csctrl_reg->cr0 = CONFIG_SYS_CR0_PRELIM; + csctrl_reg->mr0 = CONFIG_SYS_MR0_PRELIM; -#if (defined(CFG_AR1_PRELIM) && defined(CFG_CR1_PRELIM) && defined(CFG_MR1_PRELIM)) - csctrl_reg->ar1 = CFG_AR1_PRELIM; - csctrl_reg->cr1 = CFG_CR1_PRELIM; - csctrl_reg->mr1 = CFG_MR1_PRELIM; +#if (defined(CONFIG_SYS_AR1_PRELIM) && defined(CONFIG_SYS_CR1_PRELIM) && defined(CONFIG_SYS_MR1_PRELIM)) + csctrl_reg->ar1 = CONFIG_SYS_AR1_PRELIM; + csctrl_reg->cr1 = CONFIG_SYS_CR1_PRELIM; + csctrl_reg->mr1 = CONFIG_SYS_MR1_PRELIM; #endif -#if (defined(CFG_AR2_PRELIM) && defined(CFG_CR2_PRELIM) && defined(CFG_MR2_PRELIM)) - csctrl_reg->ar2 = CFG_AR2_PRELIM; - csctrl_reg->cr2 = CFG_CR2_PRELIM; - csctrl_reg->mr2 = CFG_MR2_PRELIM; +#if (defined(CONFIG_SYS_AR2_PRELIM) && defined(CONFIG_SYS_CR2_PRELIM) && defined(CONFIG_SYS_MR2_PRELIM)) + csctrl_reg->ar2 = CONFIG_SYS_AR2_PRELIM; + csctrl_reg->cr2 = CONFIG_SYS_CR2_PRELIM; + csctrl_reg->mr2 = CONFIG_SYS_MR2_PRELIM; #endif -#if (defined(CFG_AR3_PRELIM) && defined(CFG_CR3_PRELIM) && defined(CFG_MR3_PRELIM)) - csctrl_reg->ar3 = CFG_AR3_PRELIM; - csctrl_reg->cr3 = CFG_CR3_PRELIM; - csctrl_reg->mr3 = CFG_MR3_PRELIM; +#if (defined(CONFIG_SYS_AR3_PRELIM) && defined(CONFIG_SYS_CR3_PRELIM) && defined(CONFIG_SYS_MR3_PRELIM)) + csctrl_reg->ar3 = CONFIG_SYS_AR3_PRELIM; + csctrl_reg->cr3 = CONFIG_SYS_CR3_PRELIM; + csctrl_reg->mr3 = CONFIG_SYS_MR3_PRELIM; #endif -#if (defined(CFG_AR4_PRELIM) && defined(CFG_CR4_PRELIM) && defined(CFG_MR4_PRELIM)) - csctrl_reg->ar4 = CFG_AR4_PRELIM; - csctrl_reg->cr4 = CFG_CR4_PRELIM; - csctrl_reg->mr4 = CFG_MR4_PRELIM; +#if (defined(CONFIG_SYS_AR4_PRELIM) && defined(CONFIG_SYS_CR4_PRELIM) && defined(CONFIG_SYS_MR4_PRELIM)) + csctrl_reg->ar4 = CONFIG_SYS_AR4_PRELIM; + csctrl_reg->cr4 = CONFIG_SYS_CR4_PRELIM; + csctrl_reg->mr4 = CONFIG_SYS_MR4_PRELIM; #endif -#if (defined(CFG_AR5_PRELIM) && defined(CFG_CR5_PRELIM) && defined(CFG_MR5_PRELIM)) - csctrl_reg->ar5 = CFG_AR5_PRELIM; - csctrl_reg->cr5 = CFG_CR5_PRELIM; - csctrl_reg->mr5 = CFG_MR5_PRELIM; +#if (defined(CONFIG_SYS_AR5_PRELIM) && defined(CONFIG_SYS_CR5_PRELIM) && defined(CONFIG_SYS_MR5_PRELIM)) + csctrl_reg->ar5 = CONFIG_SYS_AR5_PRELIM; + csctrl_reg->cr5 = CONFIG_SYS_CR5_PRELIM; + csctrl_reg->mr5 = CONFIG_SYS_MR5_PRELIM; #endif -#if (defined(CFG_AR6_PRELIM) && defined(CFG_CR6_PRELIM) && defined(CFG_MR6_PRELIM)) - csctrl_reg->ar6 = CFG_AR6_PRELIM; - csctrl_reg->cr6 = CFG_CR6_PRELIM; - csctrl_reg->mr6 = CFG_MR6_PRELIM; +#if (defined(CONFIG_SYS_AR6_PRELIM) && defined(CONFIG_SYS_CR6_PRELIM) && defined(CONFIG_SYS_MR6_PRELIM)) + csctrl_reg->ar6 = CONFIG_SYS_AR6_PRELIM; + csctrl_reg->cr6 = CONFIG_SYS_CR6_PRELIM; + csctrl_reg->mr6 = CONFIG_SYS_MR6_PRELIM; #endif -#if (defined(CFG_AR7_PRELIM) && defined(CFG_CR7_PRELIM) && defined(CFG_MR7_PRELIM)) - csctrl_reg->ar7 = CFG_AR7_PRELIM; - csctrl_reg->cr7 = CFG_CR7_PRELIM; - csctrl_reg->mr7 = CFG_MR7_PRELIM; +#if (defined(CONFIG_SYS_AR7_PRELIM) && defined(CONFIG_SYS_CR7_PRELIM) && defined(CONFIG_SYS_MR7_PRELIM)) + csctrl_reg->ar7 = CONFIG_SYS_AR7_PRELIM; + csctrl_reg->cr7 = CONFIG_SYS_CR7_PRELIM; + csctrl_reg->mr7 = CONFIG_SYS_MR7_PRELIM; #endif #endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ #ifdef CONFIG_FSL_I2C - CFG_I2C_PINMUX_REG &= CFG_I2C_PINMUX_CLR; - CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET; + CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR; + CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET; #endif /* enable instruction cache now */ @@ -352,7 +352,7 @@ void uart_port_conf(void) volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO; /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: gpio->par_uart |= UART0_ENABLE_MASK; break; @@ -384,155 +384,155 @@ void cpu_init_f(void) #ifndef CONFIG_MONITOR_IS_IN_RAM /* Set speed /PLL */ MCFCLOCK_SYNCR = - MCFCLOCK_SYNCR_MFD(CFG_MFD) | MCFCLOCK_SYNCR_RFD(CFG_RFD); + MCFCLOCK_SYNCR_MFD(CONFIG_SYS_MFD) | MCFCLOCK_SYNCR_RFD(CONFIG_SYS_RFD); while (!(MCFCLOCK_SYNSR & MCFCLOCK_SYNSR_LOCK)) ; MCFGPIO_PBCDPAR = 0xc0; /* Set up the GPIO ports */ -#ifdef CFG_PEPAR - MCFGPIO_PEPAR = CFG_PEPAR; +#ifdef CONFIG_SYS_PEPAR + MCFGPIO_PEPAR = CONFIG_SYS_PEPAR; #endif -#ifdef CFG_PFPAR - MCFGPIO_PFPAR = CFG_PFPAR; +#ifdef CONFIG_SYS_PFPAR + MCFGPIO_PFPAR = CONFIG_SYS_PFPAR; #endif -#ifdef CFG_PJPAR - MCFGPIO_PJPAR = CFG_PJPAR; +#ifdef CONFIG_SYS_PJPAR + MCFGPIO_PJPAR = CONFIG_SYS_PJPAR; #endif -#ifdef CFG_PSDPAR - MCFGPIO_PSDPAR = CFG_PSDPAR; +#ifdef CONFIG_SYS_PSDPAR + MCFGPIO_PSDPAR = CONFIG_SYS_PSDPAR; #endif -#ifdef CFG_PASPAR - MCFGPIO_PASPAR = CFG_PASPAR; +#ifdef CONFIG_SYS_PASPAR + MCFGPIO_PASPAR = CONFIG_SYS_PASPAR; #endif -#ifdef CFG_PEHLPAR - MCFGPIO_PEHLPAR = CFG_PEHLPAR; +#ifdef CONFIG_SYS_PEHLPAR + MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR; #endif -#ifdef CFG_PQSPAR - MCFGPIO_PQSPAR = CFG_PQSPAR; +#ifdef CONFIG_SYS_PQSPAR + MCFGPIO_PQSPAR = CONFIG_SYS_PQSPAR; #endif -#ifdef CFG_PTCPAR - MCFGPIO_PTCPAR = CFG_PTCPAR; +#ifdef CONFIG_SYS_PTCPAR + MCFGPIO_PTCPAR = CONFIG_SYS_PTCPAR; #endif -#ifdef CFG_PTDPAR - MCFGPIO_PTDPAR = CFG_PTDPAR; +#ifdef CONFIG_SYS_PTDPAR + MCFGPIO_PTDPAR = CONFIG_SYS_PTDPAR; #endif -#ifdef CFG_PUAPAR - MCFGPIO_PUAPAR = CFG_PUAPAR; +#ifdef CONFIG_SYS_PUAPAR + MCFGPIO_PUAPAR = CONFIG_SYS_PUAPAR; #endif -#ifdef CFG_DDRUA - MCFGPIO_DDRUA = CFG_DDRUA; +#ifdef CONFIG_SYS_DDRUA + MCFGPIO_DDRUA = CONFIG_SYS_DDRUA; #endif /* This is probably a bad place to setup chip selects, but everyone else is doing it! */ -#if defined(CFG_CS0_BASE) & defined(CFG_CS0_SIZE) & \ - defined(CFG_CS0_WIDTH) & defined(CFG_CS0_WS) +#if defined(CONFIG_SYS_CS0_BASE) & defined(CONFIG_SYS_CS0_SIZE) & \ + defined(CONFIG_SYS_CS0_WIDTH) & defined(CONFIG_SYS_CS0_WS) - MCFCSM_CSAR0 = (CFG_CS0_BASE >> 16) & 0xFFFF; + MCFCSM_CSAR0 = (CONFIG_SYS_CS0_BASE >> 16) & 0xFFFF; -#if (CFG_CS0_WIDTH == 8) -#define CFG_CS0_PS MCFCSM_CSCR_PS_8 -#elif (CFG_CS0_WIDTH == 16) -#define CFG_CS0_PS MCFCSM_CSCR_PS_16 -#elif (CFG_CS0_WIDTH == 32) -#define CFG_CS0_PS MCFCSM_CSCR_PS_32 +#if (CONFIG_SYS_CS0_WIDTH == 8) +#define CONFIG_SYS_CS0_PS MCFCSM_CSCR_PS_8 +#elif (CONFIG_SYS_CS0_WIDTH == 16) +#define CONFIG_SYS_CS0_PS MCFCSM_CSCR_PS_16 +#elif (CONFIG_SYS_CS0_WIDTH == 32) +#define CONFIG_SYS_CS0_PS MCFCSM_CSCR_PS_32 #else -#error "CFG_CS0_WIDTH: Fault - wrong bus with for CS0" +#error "CONFIG_SYS_CS0_WIDTH: Fault - wrong bus with for CS0" #endif - MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CFG_CS0_WS) - | CFG_CS0_PS | MCFCSM_CSCR_AA; + MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CONFIG_SYS_CS0_WS) + | CONFIG_SYS_CS0_PS | MCFCSM_CSCR_AA; -#if (CFG_CS0_RO != 0) - MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE - 1) +#if (CONFIG_SYS_CS0_RO != 0) + MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS0_SIZE - 1) | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; #else - MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE - 1) | MCFCSM_CSMR_V; + MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS0_SIZE - 1) | MCFCSM_CSMR_V; #endif #else #warning "Chip Select 0 are not initialized/used" #endif -#if defined(CFG_CS1_BASE) & defined(CFG_CS1_SIZE) & \ - defined(CFG_CS1_WIDTH) & defined(CFG_CS1_WS) +#if defined(CONFIG_SYS_CS1_BASE) & defined(CONFIG_SYS_CS1_SIZE) & \ + defined(CONFIG_SYS_CS1_WIDTH) & defined(CONFIG_SYS_CS1_WS) - MCFCSM_CSAR1 = (CFG_CS1_BASE >> 16) & 0xFFFF; + MCFCSM_CSAR1 = (CONFIG_SYS_CS1_BASE >> 16) & 0xFFFF; -#if (CFG_CS1_WIDTH == 8) -#define CFG_CS1_PS MCFCSM_CSCR_PS_8 -#elif (CFG_CS1_WIDTH == 16) -#define CFG_CS1_PS MCFCSM_CSCR_PS_16 -#elif (CFG_CS1_WIDTH == 32) -#define CFG_CS1_PS MCFCSM_CSCR_PS_32 +#if (CONFIG_SYS_CS1_WIDTH == 8) +#define CONFIG_SYS_CS1_PS MCFCSM_CSCR_PS_8 +#elif (CONFIG_SYS_CS1_WIDTH == 16) +#define CONFIG_SYS_CS1_PS MCFCSM_CSCR_PS_16 +#elif (CONFIG_SYS_CS1_WIDTH == 32) +#define CONFIG_SYS_CS1_PS MCFCSM_CSCR_PS_32 #else -#error "CFG_CS1_WIDTH: Fault - wrong bus with for CS1" +#error "CONFIG_SYS_CS1_WIDTH: Fault - wrong bus with for CS1" #endif - MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CFG_CS1_WS) - | CFG_CS1_PS | MCFCSM_CSCR_AA; + MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CONFIG_SYS_CS1_WS) + | CONFIG_SYS_CS1_PS | MCFCSM_CSCR_AA; -#if (CFG_CS1_RO != 0) - MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE - 1) +#if (CONFIG_SYS_CS1_RO != 0) + MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS1_SIZE - 1) | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; #else - MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE - 1) + MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS1_SIZE - 1) | MCFCSM_CSMR_V; #endif #else #warning "Chip Select 1 are not initialized/used" #endif -#if defined(CFG_CS2_BASE) & defined(CFG_CS2_SIZE) & \ - defined(CFG_CS2_WIDTH) & defined(CFG_CS2_WS) +#if defined(CONFIG_SYS_CS2_BASE) & defined(CONFIG_SYS_CS2_SIZE) & \ + defined(CONFIG_SYS_CS2_WIDTH) & defined(CONFIG_SYS_CS2_WS) - MCFCSM_CSAR2 = (CFG_CS2_BASE >> 16) & 0xFFFF; + MCFCSM_CSAR2 = (CONFIG_SYS_CS2_BASE >> 16) & 0xFFFF; -#if (CFG_CS2_WIDTH == 8) -#define CFG_CS2_PS MCFCSM_CSCR_PS_8 -#elif (CFG_CS2_WIDTH == 16) -#define CFG_CS2_PS MCFCSM_CSCR_PS_16 -#elif (CFG_CS2_WIDTH == 32) -#define CFG_CS2_PS MCFCSM_CSCR_PS_32 +#if (CONFIG_SYS_CS2_WIDTH == 8) +#define CONFIG_SYS_CS2_PS MCFCSM_CSCR_PS_8 +#elif (CONFIG_SYS_CS2_WIDTH == 16) +#define CONFIG_SYS_CS2_PS MCFCSM_CSCR_PS_16 +#elif (CONFIG_SYS_CS2_WIDTH == 32) +#define CONFIG_SYS_CS2_PS MCFCSM_CSCR_PS_32 #else -#error "CFG_CS2_WIDTH: Fault - wrong bus with for CS2" +#error "CONFIG_SYS_CS2_WIDTH: Fault - wrong bus with for CS2" #endif - MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CFG_CS2_WS) - | CFG_CS2_PS | MCFCSM_CSCR_AA; + MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CONFIG_SYS_CS2_WS) + | CONFIG_SYS_CS2_PS | MCFCSM_CSCR_AA; -#if (CFG_CS2_RO != 0) - MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE - 1) +#if (CONFIG_SYS_CS2_RO != 0) + MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS2_SIZE - 1) | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; #else - MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE - 1) + MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS2_SIZE - 1) | MCFCSM_CSMR_V; #endif #else #warning "Chip Select 2 are not initialized/used" #endif -#if defined(CFG_CS3_BASE) & defined(CFG_CS3_SIZE) & \ - defined(CFG_CS3_WIDTH) & defined(CFG_CS3_WS) +#if defined(CONFIG_SYS_CS3_BASE) & defined(CONFIG_SYS_CS3_SIZE) & \ + defined(CONFIG_SYS_CS3_WIDTH) & defined(CONFIG_SYS_CS3_WS) - MCFCSM_CSAR3 = (CFG_CS3_BASE >> 16) & 0xFFFF; + MCFCSM_CSAR3 = (CONFIG_SYS_CS3_BASE >> 16) & 0xFFFF; -#if (CFG_CS3_WIDTH == 8) -#define CFG_CS3_PS MCFCSM_CSCR_PS_8 -#elif (CFG_CS3_WIDTH == 16) -#define CFG_CS3_PS MCFCSM_CSCR_PS_16 -#elif (CFG_CS3_WIDTH == 32) -#define CFG_CS3_PS MCFCSM_CSCR_PS_32 +#if (CONFIG_SYS_CS3_WIDTH == 8) +#define CONFIG_SYS_CS3_PS MCFCSM_CSCR_PS_8 +#elif (CONFIG_SYS_CS3_WIDTH == 16) +#define CONFIG_SYS_CS3_PS MCFCSM_CSCR_PS_16 +#elif (CONFIG_SYS_CS3_WIDTH == 32) +#define CONFIG_SYS_CS3_PS MCFCSM_CSCR_PS_32 #else -#error "CFG_CS3_WIDTH: Fault - wrong bus with for CS1" +#error "CONFIG_SYS_CS3_WIDTH: Fault - wrong bus with for CS1" #endif - MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CFG_CS3_WS) - | CFG_CS3_PS | MCFCSM_CSCR_AA; + MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CONFIG_SYS_CS3_WS) + | CONFIG_SYS_CS3_PS | MCFCSM_CSCR_AA; -#if (CFG_CS3_RO != 0) - MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE - 1) +#if (CONFIG_SYS_CS3_RO != 0) + MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS3_SIZE - 1) | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; #else - MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE - 1) + MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS3_SIZE - 1) | MCFCSM_CSMR_V; #endif #else @@ -556,7 +556,7 @@ int cpu_init_r(void) void uart_port_conf(void) { /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: MCFGPIO_PUAPAR &= 0xFc; MCFGPIO_PUAPAR |= 0x03; @@ -589,12 +589,12 @@ void cpu_init_f(void) * which is their primary function. * ~Jeremy */ - mbar2_writeLong(MCFSIM_GPIO_FUNC, CFG_GPIO_FUNC); - mbar2_writeLong(MCFSIM_GPIO1_FUNC, CFG_GPIO1_FUNC); - mbar2_writeLong(MCFSIM_GPIO_EN, CFG_GPIO_EN); - mbar2_writeLong(MCFSIM_GPIO1_EN, CFG_GPIO1_EN); - mbar2_writeLong(MCFSIM_GPIO_OUT, CFG_GPIO_OUT); - mbar2_writeLong(MCFSIM_GPIO1_OUT, CFG_GPIO1_OUT); + mbar2_writeLong(MCFSIM_GPIO_FUNC, CONFIG_SYS_GPIO_FUNC); + mbar2_writeLong(MCFSIM_GPIO1_FUNC, CONFIG_SYS_GPIO1_FUNC); + mbar2_writeLong(MCFSIM_GPIO_EN, CONFIG_SYS_GPIO_EN); + mbar2_writeLong(MCFSIM_GPIO1_EN, CONFIG_SYS_GPIO1_EN); + mbar2_writeLong(MCFSIM_GPIO_OUT, CONFIG_SYS_GPIO_OUT); + mbar2_writeLong(MCFSIM_GPIO1_OUT, CONFIG_SYS_GPIO1_OUT); /* * dBug Compliance: @@ -636,13 +636,13 @@ void cpu_init_f(void) * Setup chip selects... */ - mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1); - mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1); - mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1); + mbar_writeShort(MCFSIM_CSAR1, CONFIG_SYS_CSAR1); + mbar_writeShort(MCFSIM_CSCR1, CONFIG_SYS_CSCR1); + mbar_writeLong(MCFSIM_CSMR1, CONFIG_SYS_CSMR1); - mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0); - mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0); - mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0); + mbar_writeShort(MCFSIM_CSAR0, CONFIG_SYS_CSAR0); + mbar_writeShort(MCFSIM_CSCR0, CONFIG_SYS_CSCR0); + mbar_writeLong(MCFSIM_CSMR0, CONFIG_SYS_CSMR0); /* enable instruction cache now */ icache_enable(); @@ -659,7 +659,7 @@ int cpu_init_r(void) void uart_port_conf(void) { /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: break; case 1: diff --git a/cpu/mcf52x2/interrupts.c b/cpu/mcf52x2/interrupts.c index b8fb7bb0ee..0181e4b416 100644 --- a/cpu/mcf52x2/interrupts.c +++ b/cpu/mcf52x2/interrupts.c @@ -51,10 +51,10 @@ int interrupt_init(void) #if defined(CONFIG_MCFTMR) void dtimer_intr_setup(void) { - volatile intctrl_t *intp = (intctrl_t *) (CFG_INTR_BASE); + volatile intctrl_t *intp = (intctrl_t *) (CONFIG_SYS_INTR_BASE); intp->int_icr1 &= ~INT_ICR1_TMR3MASK; - intp->int_icr1 |= CFG_TMRINTR_PRI; + intp->int_icr1 |= CONFIG_SYS_TMRINTR_PRI; } #endif /* CONFIG_MCFTMR */ #endif /* CONFIG_M5272 */ @@ -62,7 +62,7 @@ void dtimer_intr_setup(void) #if defined(CONFIG_M5282) || defined(CONFIG_M5271) || defined(CONFIG_M5275) int interrupt_init(void) { - volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE); /* Make sure all interrupts are disabled */ intp->imrl0 |= 0x1; @@ -74,11 +74,11 @@ int interrupt_init(void) #if defined(CONFIG_MCFTMR) void dtimer_intr_setup(void) { - volatile int0_t *intp = (int0_t *) (CFG_INTR_BASE); + volatile int0_t *intp = (int0_t *) (CONFIG_SYS_INTR_BASE); - intp->icr0[CFG_TMRINTR_NO] = CFG_TMRINTR_PRI; + intp->icr0[CONFIG_SYS_TMRINTR_NO] = CONFIG_SYS_TMRINTR_PRI; intp->imrl0 &= 0xFFFFFFFE; - intp->imrl0 &= ~CFG_TMRINTR_MASK; + intp->imrl0 &= ~CONFIG_SYS_TMRINTR_MASK; } #endif /* CONFIG_MCFTMR */ #endif /* CONFIG_M5282 | CONFIG_M5271 | CONFIG_M5275 */ @@ -95,7 +95,7 @@ int interrupt_init(void) void dtimer_intr_setup(void) { mbar_writeLong(MCFSIM_IMR, mbar_readLong(MCFSIM_IMR) & ~0x00000400); - mbar_writeByte(MCFSIM_TIMER2ICR, CFG_TMRINTR_PRI); + mbar_writeByte(MCFSIM_TIMER2ICR, CONFIG_SYS_TMRINTR_PRI); } #endif /* CONFIG_MCFTMR */ #endif /* CONFIG_M5249 || CONFIG_M5253 */ diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c index 4cb8f9300d..fe51fb4803 100644 --- a/cpu/mcf52x2/speed.c +++ b/cpu/mcf52x2/speed.c @@ -39,11 +39,11 @@ int get_clocks (void) volatile unsigned long cpll = mbar2_readLong(MCFSIM_PLLCR); unsigned long pllcr; -#ifndef CFG_PLL_BYPASS +#ifndef CONFIG_SYS_PLL_BYPASS #ifdef CONFIG_M5249 /* Setup the PLL to run at the specified speed */ -#ifdef CFG_FAST_CLK +#ifdef CONFIG_SYS_FAST_CLK pllcr = 0x925a3100; /* ~140MHz clock (PLL bypass = 0) */ #else pllcr = 0x135a4140; /* ~72MHz clock (PLL bypass = 0) */ @@ -51,7 +51,7 @@ int get_clocks (void) #endif /* CONFIG_M5249 */ #ifdef CONFIG_M5253 - pllcr = CFG_PLLCR; + pllcr = CONFIG_SYS_PLLCR; #endif /* CONFIG_M5253 */ cpll = cpll & 0xfffffffe; /* Set PLL bypass mode = 0 (PSTCLK = crystal) */ @@ -60,7 +60,7 @@ int get_clocks (void) pllcr ^= 0x00000001; /* Set pll bypass to 1 */ mbar2_writeLong(MCFSIM_PLLCR, pllcr); /* Start locking (pll bypass = 1) */ udelay(0x20); /* Wait for a lock ... */ -#endif /* #ifndef CFG_PLL_BYPASS */ +#endif /* #ifndef CONFIG_SYS_PLL_BYPASS */ #endif /* CONFIG_M5249 || CONFIG_M5253 */ @@ -76,7 +76,7 @@ int get_clocks (void) ; #endif - gd->cpu_clk = CFG_CLK; + gd->cpu_clk = CONFIG_SYS_CLK; #if defined(CONFIG_M5249) || defined(CONFIG_M5253) || defined(CONFIG_M5275) gd->bus_clk = gd->cpu_clk / 2; #else @@ -85,7 +85,7 @@ int get_clocks (void) #ifdef CONFIG_FSL_I2C gd->i2c1_clk = gd->bus_clk; -#ifdef CFG_I2C2_OFFSET +#ifdef CONFIG_SYS_I2C2_OFFSET gd->i2c2_clk = gd->bus_clk; #endif #endif diff --git a/cpu/mcf52x2/start.S b/cpu/mcf52x2/start.S index 2e8ecfbe68..da45bcbbf7 100644 --- a/cpu/mcf52x2/start.S +++ b/cpu/mcf52x2/start.S @@ -56,7 +56,7 @@ _vectors: .long 0x00000000 /* Flash offset is 0 until we setup CS0 */ -#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE) +#if defined(CONFIG_M5282) && (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) .long _start - TEXT_BASE #else .long _START @@ -103,9 +103,9 @@ _vectors: .text -#if defined(CFG_INT_FLASH_BASE) && \ +#if defined(CONFIG_SYS_INT_FLASH_BASE) && \ (defined(CONFIG_M5282) || defined(CONFIG_M5281)) - #if (TEXT_BASE == CFG_INT_FLASH_BASE) + #if (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) .long 0x55AA55AA,0xAA55AA55 /* CFM Backdoorkey */ .long 0xFFFFFFFF /* all sectors protected */ .long 0x00000000 /* supervisor/User restriction */ @@ -120,44 +120,44 @@ _start: move.w #0x2700,%sr #if defined(CONFIG_M5272) || defined(CONFIG_M5249) || defined(CONFIG_M5253) - move.l #(CFG_MBAR + 1), %d0 /* set MBAR address + valid flag */ + move.l #(CONFIG_SYS_MBAR + 1), %d0 /* set MBAR address + valid flag */ move.c %d0, %MBAR /*** The 5249 has MBAR2 as well ***/ -#ifdef CFG_MBAR2 - move.l #(CFG_MBAR2 + 1), %d0 /* Get MBAR2 address */ +#ifdef CONFIG_SYS_MBAR2 + move.l #(CONFIG_SYS_MBAR2 + 1), %d0 /* Get MBAR2 address */ movec %d0, #0xc0e /* Set MBAR2 */ #endif - move.l #(CFG_INIT_RAM_ADDR + 1), %d0 + move.l #(CONFIG_SYS_INIT_RAM_ADDR + 1), %d0 movec %d0, %RAMBAR0 #endif /* CONFIG_M5272 || CONFIG_M5249 || CONFIG_M5253 */ #if defined(CONFIG_M5282) || defined(CONFIG_M5271) /* Initialize IPSBAR */ - move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */ + move.l #(CONFIG_SYS_MBAR + 1), %d0 /* set IPSBAR address + valid flag */ move.l %d0, 0x40000000 /* Initialize RAMBAR1: locate SRAM and validate it */ - move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0 + move.l #(CONFIG_SYS_INIT_RAM_ADDR + 0x21), %d0 movec %d0, %RAMBAR1 #if defined(CONFIG_M5282) -#if (TEXT_BASE == CFG_INT_FLASH_BASE) +#if (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) /* Setup code in SRAM to initialize FLASHBAR, if start from internal Flash */ - move.l #(_flashbar_setup-CFG_INT_FLASH_BASE), %a0 - move.l #(_flashbar_setup_end-CFG_INT_FLASH_BASE), %a1 - move.l #(CFG_INIT_RAM_ADDR), %a2 + move.l #(_flashbar_setup-CONFIG_SYS_INT_FLASH_BASE), %a0 + move.l #(_flashbar_setup_end-CONFIG_SYS_INT_FLASH_BASE), %a1 + move.l #(CONFIG_SYS_INIT_RAM_ADDR), %a2 _copy_flash: move.l (%a0)+, (%a2)+ cmp.l %a0, %a1 bgt.s _copy_flash - jmp CFG_INIT_RAM_ADDR + jmp CONFIG_SYS_INIT_RAM_ADDR _flashbar_setup: /* Initialize FLASHBAR: locate internal Flash and validate it */ - move.l #(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0 + move.l #(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0 movec %d0, %FLASHBAR jmp _after_flashbar_copy.L /* Force jump to absolute address */ _flashbar_setup_end: @@ -165,9 +165,9 @@ _flashbar_setup_end: _after_flashbar_copy: #else /* Setup code to initialize FLASHBAR, if start from external Memory */ - move.l #(CFG_INT_FLASH_BASE + CFG_INT_FLASH_ENABLE), %d0 + move.l #(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0 movec %d0, %FLASHBAR -#endif /* (TEXT_BASE == CFG_INT_FLASH_BASE) */ +#endif /* (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) */ #endif #endif @@ -175,22 +175,22 @@ _after_flashbar_copy: * therefore no VBR to set */ #if !defined(CONFIG_MONITOR_IS_IN_RAM) -#if defined(CONFIG_M5282) && (TEXT_BASE == CFG_INT_FLASH_BASE) - move.l #CFG_INT_FLASH_BASE, %d0 +#if defined(CONFIG_M5282) && (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) + move.l #CONFIG_SYS_INT_FLASH_BASE, %d0 #else - move.l #CFG_FLASH_BASE, %d0 + move.l #CONFIG_SYS_FLASH_BASE, %d0 #endif movec %d0, %VBR #endif #ifdef CONFIG_M5275 /* Initialize IPSBAR */ - move.l #(CFG_MBAR + 1), %d0 /* set IPSBAR address + valid flag */ + move.l #(CONFIG_SYS_MBAR + 1), %d0 /* set IPSBAR address + valid flag */ move.l %d0, 0x40000000 /* movec %d0, %MBAR */ /* Initialize RAMBAR: locate SRAM and validate it */ - move.l #(CFG_INIT_RAM_ADDR + 0x21), %d0 + move.l #(CONFIG_SYS_INIT_RAM_ADDR + 0x21), %d0 movec %d0, %RAMBAR1 #endif @@ -204,7 +204,7 @@ _after_flashbar_copy: #endif /* set stackpointer to end of internal ram to get some stackspace for the first c-code */ - move.l #(CFG_INIT_RAM_ADDR + CFG_INIT_SP_OFFSET), %sp + move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp clr.l %sp@- move.l #__got_start, %a5 /* put relocation table address to a5 */ @@ -235,7 +235,7 @@ relocate_code: move.l 12(%a6), %d0 /* Save copy of Global Data pointer */ move.l 16(%a6), %a0 /* Save copy of Destination Address */ - move.l #CFG_MONITOR_BASE, %a1 + move.l #CONFIG_SYS_MONITOR_BASE, %a1 move.l #__init_end, %a2 move.l %a0, %a3 /* copy the code to RAM */ @@ -249,7 +249,7 @@ relocate_code: * initialization, now running from RAM. */ move.l %a0, %a1 - add.l #(in_ram - CFG_MONITOR_BASE), %a1 + add.l #(in_ram - CONFIG_SYS_MONITOR_BASE), %a1 jmp (%a1) in_ram: @@ -259,9 +259,9 @@ clear_bss: * Now clear BSS segment */ move.l %a0, %a1 - add.l #(_sbss - CFG_MONITOR_BASE),%a1 + add.l #(_sbss - CONFIG_SYS_MONITOR_BASE),%a1 move.l %a0, %d1 - add.l #(_ebss - CFG_MONITOR_BASE),%d1 + add.l #(_ebss - CONFIG_SYS_MONITOR_BASE),%d1 6: clr.l (%a1)+ cmp.l %a1,%d1 @@ -271,11 +271,11 @@ clear_bss: * fix got table in RAM */ move.l %a0, %a1 - add.l #(__got_start - CFG_MONITOR_BASE),%a1 + add.l #(__got_start - CONFIG_SYS_MONITOR_BASE),%a1 move.l %a1,%a5 /* * fix got pointer register a5 */ move.l %a0, %a2 - add.l #(__got_end - CFG_MONITOR_BASE),%a2 + add.l #(__got_end - CONFIG_SYS_MONITOR_BASE),%a2 7: move.l (%a1),%d1 @@ -290,27 +290,27 @@ clear_bss: /* quick and dirty */ move.l %a0,%d1 - add.l #(icache_state - CFG_MONITOR_BASE),%d1 + add.l #(icache_state - CONFIG_SYS_MONITOR_BASE),%d1 move.l %a0,%a1 - add.l #(icache_state_access_1+2 - CFG_MONITOR_BASE),%a1 + add.l #(icache_state_access_1+2 - CONFIG_SYS_MONITOR_BASE),%a1 move.l %d1,(%a1) move.l %a0,%a1 - add.l #(icache_state_access_2+2 - CFG_MONITOR_BASE),%a1 + add.l #(icache_state_access_2+2 - CONFIG_SYS_MONITOR_BASE),%a1 move.l %d1,(%a1) move.l %a0,%a1 - add.l #(icache_state_access_3+2 - CFG_MONITOR_BASE),%a1 + add.l #(icache_state_access_3+2 - CONFIG_SYS_MONITOR_BASE),%a1 move.l %d1,(%a1) #endif /* calculate relative jump to board_init_r in ram */ move.l %a0, %a1 - add.l #(board_init_r - CFG_MONITOR_BASE), %a1 + add.l #(board_init_r - CONFIG_SYS_MONITOR_BASE), %a1 /* set parameters for board_init_r */ move.l %a0,-(%sp) /* dest_addr */ move.l %d0,-(%sp) /* gd */ -#if defined(DEBUG) && (TEXT_BASE != CFG_INT_FLASH_BASE) && \ - defined(CFG_HALT_BEFOR_RAM_JUMP) +#if defined(DEBUG) && (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) && \ + defined(CONFIG_SYS_HALT_BEFOR_RAM_JUMP) halt #endif jsr (%a1) @@ -344,14 +344,14 @@ _int_handler: icache_enable: move.l #0x01000000, %d0 /* Invalidate cache cmd */ movec %d0, %CACR /* Invalidate cache */ - move.l #(CFG_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ + move.l #(CONFIG_SYS_SDRAM_BASE + 0xc000), %d0 /* Setup cache mask */ movec %d0, %ACR0 /* Enable cache */ move.l #0x80000200, %d0 /* Setup cache mask */ movec %d0, %CACR /* Enable cache */ nop - move.l #(CFG_INIT_RAM_ADDR+CFG_INIT_RAM_END-8), %a1 + move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1 moveq #1, %d0 move.l %d0, (%a1) rts -- cgit