From 92b8964bed0d1b779d9e26be4e16755b5c635415 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 16 Oct 2009 10:01:09 +0200 Subject: ppc4xx: Update flash size in reg property of the NOR flash node Till now only the ranges in the ebc node are updated with the values currently configured in the PPC4xx EBC controller. With this patch now the NOR flash size is updated in the device tree blob as well. This is done by scanning the compatible nodes "cfi-flash" and "jedec-flash" for the correct chip select number. This size fixup is enabled for all AMCC eval board right now. Other 4xx boards may want to enable it as well, if this problem with multiple NOR FLASH sizes exists. Signed-off-by: Stefan Roese Cc: Wolfgang Denk --- cpu/ppc4xx/fdt.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'cpu/ppc4xx/fdt.c') diff --git a/cpu/ppc4xx/fdt.c b/cpu/ppc4xx/fdt.c index b3108327f4..15a184b5c6 100644 --- a/cpu/ppc4xx/fdt.c +++ b/cpu/ppc4xx/fdt.c @@ -59,11 +59,17 @@ void __ft_board_setup(void *blob, bd_t *bd) *p++ = 0; *p++ = bxcr & EBC_BXCR_BAS_MASK; *p++ = EBC_BXCR_BANK_SIZE(bxcr); + +#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE + /* Try to update reg property in nor flash node too */ + fdt_fixup_nor_flash_size(blob, i, + EBC_BXCR_BANK_SIZE(bxcr)); +#endif } } /* Some 405 PPC's have EBC as direct PLB child in the dts */ - if (fdt_path_offset(blob, "/plb/opb/ebc") < 0) + if (fdt_path_offset(blob, ebc_path) < 0) strcpy(ebc_path, "/plb/ebc"); rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges, (p - ranges) * sizeof(u32), 1); -- cgit