From 2ad3aba01d37b72e7c957b07e102fccd64fe6d13 Mon Sep 17 00:00:00 2001 From: Jeffrey Mann Date: Thu, 12 Apr 2007 14:15:59 +0200 Subject: ppc4xx: Fix i2c divisor calcularion for PPC4xx This patch fixes changes the i2c_init(...) function to use the function get_OPB_freq() rather than calculating the OPB speed by sysInfo.freqPLB/sysInfo.pllOpbDiv. The get_OPB_freq() function is specific per processor. The prior method was not and so was calculating the wrong speed for some PPC4xx processors. Signed-off-by: Jeffrey Mann Signed-off-by: Stefan Roese --- cpu/ppc4xx/i2c.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c index 8f4da8621d..47c264e222 100644 --- a/cpu/ppc4xx/i2c.c +++ b/cpu/ppc4xx/i2c.c @@ -91,7 +91,6 @@ static void _i2c_bus_reset(void) void i2c_init(int speed, int slaveadd) { - sys_info_t sysInfo; unsigned long freqOPB; int val, divisor; int bus; @@ -124,8 +123,7 @@ void i2c_init(int speed, int slaveadd) /* Clock divide Register */ /* get OPB frequency */ - get_sys_info(&sysInfo); - freqOPB = sysInfo.freqPLB / sysInfo.pllOpbDiv; + freqOPB = get_OPB_freq(); /* set divisor according to freqOPB */ divisor = (freqOPB - 1) / 10000000; if (divisor == 0) -- cgit From 90e6f41cf09fc98f6ccb510e183d53ab8546cf2f Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 18 Apr 2007 12:05:59 +0200 Subject: ppc4xx: Add output for bootrom location to 405EZ ports Now 405EZ ports also show upon bootup from which boot device they are configured to boot: U-Boot 1.2.0-gd3832e8f-dirty (Apr 18 2007 - 07:47:05) CPU: AMCC PowerPC 405EZ Rev. A at 199.999 MHz (PLB=133, OPB=66, EBC=66 MHz) Bootstrap Option E - Boot ROM Location EBC (32 bits) 16 kB I-Cache 16 kB D-Cache Board: Acadia - AMCC PPC405EZ Evaluation Board Signed-off-by: Stefan Roese --- cpu/ppc4xx/cpu.c | 30 ++++++++++++++++++++++++++---- 1 file changed, 26 insertions(+), 4 deletions(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index 2d8740ccea..8e6bc84db0 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -125,6 +125,7 @@ int i2c_bootrom_enabled(void) return (val & SDR0_SDCS_SDD); #endif } +#endif #if defined(CONFIG_440GX) #define SDR0_PINSTP_SHIFT 29 @@ -178,16 +179,37 @@ static char *bootstrap_str[] = { }; #endif +#if defined(CONFIG_405EZ) +#define SDR0_PINSTP_SHIFT 28 +static char *bootstrap_str[] = { + "EBC (8 bits)", + "SPI (fast)", + "NAND (512 page, 4 addr cycle)", + "I2C (Addr 0x50)", + "EBC (32 bits)", + "I2C (Addr 0x50)", + "NAND (2K page, 5 addr cycle)", + "I2C (Addr 0x50)", + "EBC (16 bits)", + "Reserved", + "NAND (2K page, 4 addr cycle)", + "I2C (Addr 0x50)", + "NAND (512 page, 3 addr cycle)", + "I2C (Addr 0x50)", + "SPI (slow)", + "I2C (Addr 0x50)", +}; +#endif + #if defined(SDR0_PINSTP_SHIFT) static int bootstrap_option(void) { unsigned long val; - mfsdr(sdr_pinstp, val); - return ((val & 0xe0000000) >> SDR0_PINSTP_SHIFT); + mfsdr(SDR_PINSTP, val); + return ((val & 0xf0000000) >> SDR0_PINSTP_SHIFT); } #endif /* SDR0_PINSTP_SHIFT */ -#endif #if defined(CONFIG_440) @@ -403,11 +425,11 @@ int checkcpu (void) #if defined(I2C_BOOTROM) printf (" I2C boot EEPROM %sabled\n", i2c_bootrom_enabled() ? "en" : "dis"); +#endif /* I2C_BOOTROM */ #if defined(SDR0_PINSTP_SHIFT) printf (" Bootstrap Option %c - ", (char)bootstrap_option() + 'A'); printf ("Boot ROM Location %s\n", bootstrap_str[bootstrap_option()]); #endif /* SDR0_PINSTP_SHIFT */ -#endif /* I2C_BOOTROM */ #if defined(CONFIG_PCI) printf (" Internal PCI arbiter %sabled", pci_arbiter_enabled() ? "en" : "dis"); -- cgit