From eeacb73b8e0823b400eda5022e56e9f5a59b37a0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 12 May 2012 08:16:46 +0000 Subject: mx28evk: Fix PSWITCH key position Fix the position for PSWITCH key. The good benefit of doing this is that boot time is greatly reduced: from 5 seconds to less then 1 second. Signed-off-by: Fabio Estevam Acked-by: Marek Vasut --- doc/README.mx28evk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'doc/README.mx28evk') diff --git a/doc/README.mx28evk b/doc/README.mx28evk index c6c3d37830..571dfdab8d 100644 --- a/doc/README.mx28evk +++ b/doc/README.mx28evk @@ -17,7 +17,7 @@ Jumper configuration To boot MX28EVK from an SD card, set the boot mode DIP switches as: * Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42) - * JTAG PSWITCH RESET: To the left (reset enabled) + * JTAG PSWITCH RESET: To the right (reset disabled) * Battery Source: Down * Wall 5V: Up * VDD 5V: To the left (off) -- cgit