From 015287919fb8243c6a539fdc70638c1bf4ca6cc7 Mon Sep 17 00:00:00 2001 From: Hannes Schmelzer Date: Thu, 22 Aug 2019 15:41:42 +0200 Subject: moveconfig: prepare moving CONFIG_SYS_SPI_U_BOOT_OFFS to Kconfig step 1 Some boards have coded this offset with formula or bitshifts in their board-config. Manually convert these things into hex-values to be able using moveconfig.py afterwards. Signed-off-by: Hannes Schmelzer --- doc/README.rockchip | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'doc/README.rockchip') diff --git a/doc/README.rockchip b/doc/README.rockchip index ab3361a7ce..531a062c9e 100644 --- a/doc/README.rockchip +++ b/doc/README.rockchip @@ -559,7 +559,7 @@ header and skipping every second 2KB block. Then the U-Boot image is written at offset 128KB and the whole image is padded to 4MB which is the SPI flash size. The position of U-Boot is controlled with this setting in U-Boot: - #define CONFIG_SYS_SPI_U_BOOT_OFFS (128 << 10) + #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 If you have a Dediprog em100pro connected then you can write the image with: -- cgit