From 3bac351370ef7cbf9d2af27ba52bee1703ad677e Mon Sep 17 00:00:00 2001
From: wdenk <wdenk>
Date: Wed, 12 Mar 2003 10:41:04 +0000
Subject: * Patch by Josef Wagner, 12 Mar 2003:   - 16/32 MB and 50/80 MHz
 support with auto-detection for IP860   - ETH05 and BEDBUG support for CU824 
  - added support for MicroSys CPC45   - new BOOTROM/FLASH0 and DOC base for
 PM826

* Patch by Robert Schwebel, 12 Mar 2003:
  Fix the chpart command on innokom board

* Name cleanup:
  mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h
  s/PPCBoot/U-Boot/ in some files
  s/pImage/uImage/  in some files

* Patch by Detlev Zundel, 15 Jan 2003:
  Fix '' command line quoting

* Patch by The LEOX team, 19 Jan 2003:
  - add support for the ELPT860 board
  - add support for Dallas ds164x RTC
---
 doc/README-i386       | 8 ++++----
 doc/README.IPHASE4539 | 6 +++---
 2 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'doc')

diff --git a/doc/README-i386 b/doc/README-i386
index 99b3e198c4..862f3f7a3a 100644
--- a/doc/README-i386
+++ b/doc/README-i386
@@ -1,4 +1,4 @@
-This is my attempt to port PPCBoot to the i386 platform. This
+This is my attempt to port U-Boot to the i386 platform. This
 work was sponsored by my emplyer, Omicron Ceti AB. http://www.omicron.se
 
 It is currently capable of booting a linux bzImage from flash on
@@ -28,13 +28,13 @@ To use this code on the CDP:
 
 
 2) Program it in to the CDP flashbank with remon
-   ppcboot.bin should be programmed att offset 0x7e000 and the kernel at
+   u-boot.bin should be programmed att offset 0x7e000 and the kernel at
    offset 0. If you want to use a jffs2 root file system (not included here), 
    it should be  programmed to offset 0x100000.
    
    remon> z
    remon> yi
-   remon> ns ppcboot.bin 7e0000
+   remon> ns u-boot.bin 7e0000
    remon> ns bzImage 0
    remon> ns image.jffs2 100000
 
@@ -43,7 +43,7 @@ To use this code on the CDP:
    remon> z
    remon> g
 
-4) PPCboot should output some message and a prompt on the terminal, to
+4) U-Boot should output some message and a prompt on the terminal, to
    start the kernel issue the following command:
    
    BOOT> bootm
diff --git a/doc/README.IPHASE4539 b/doc/README.IPHASE4539
index d3db38ef54..9302ff5ce4 100644
--- a/doc/README.IPHASE4539
+++ b/doc/README.IPHASE4539
@@ -332,10 +332,10 @@ Linux:
 	$ make IPHASE4539_config
 	$ make oldconfig
 	$ make dep
-	$ make pImage
-	$ cp -p arch/ppc/mbxboot/pImage /tftpboot
+	$ make uImage
+	$ cp -p arch/ppc/mbxboot/uImage /tftpboot
 
-	Load pImage via tftp and boot it.
+	Load uImage via tftp and boot it.
 
 
 Flash organisation:
-- 
cgit