From d761fa620575dff5a6a5909de53e4d1d06a71779 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 13 Dec 2010 21:53:09 -0600 Subject: powerpc/85xx: Removed support for ATUM8548 board The ATUM8548 board is no longer maintained and thus we are removing support for it. Signed-off-by: Kumar Gala --- doc/README.atum8548 | 29 ----------------------------- 1 file changed, 29 deletions(-) delete mode 100644 doc/README.atum8548 (limited to 'doc') diff --git a/doc/README.atum8548 b/doc/README.atum8548 deleted file mode 100644 index 4eb56bae2f..0000000000 --- a/doc/README.atum8548 +++ /dev/null @@ -1,29 +0,0 @@ -Building U-Boot ---------------- - -The ATUM8548 code is known to build using ELDK 4.1. - -$ make ATUM8548_config -Configuring for ATUM8548 board... -$ make - -Using Flash ------------ - -The ATUM8548 board has one flash bank, of 128MB in size (2^23 = 0x08000000). - -The BDI2000 commands for copying u-boot into flash are -as follows: - - erase 0xFFF80000 0x4000 0x20 - prog 0xfff80000 uboot.bin bin - -Booting Linux -------------- - -U-boot/kermit commands for booting linux via NFS - assumming the proper -bootargs are set - are as follows: - - tftp 1000000 uImage.atum - tftp c00000 mpc8548atum.dtb - bootm 1000000 - c00000 -- cgit From 810c44274980d8bb9fa0d81d091a374adbae8309 Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Fri, 17 Dec 2010 17:17:58 -0600 Subject: 85xx boards: Rename CONFIG_DDR_DLL to CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN This config option is for an erratum workaround; rename it to be more clear. Also, drop it from config files don't need it and were undefining it. Signed-off-by: Becky Bruce Signed-off-by: Kumar Gala --- doc/README.mpc85xxads | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'doc') diff --git a/doc/README.mpc85xxads b/doc/README.mpc85xxads index 046f981cf0..d059a97981 100644 --- a/doc/README.mpc85xxads +++ b/doc/README.mpc85xxads @@ -144,8 +144,8 @@ Updated 13-July-2004 Jon Loeliger also manual config the DDR after undef this definition. CONFIG_DDR_ECC only for ECC DDR module - CONFIG_DDR_DLL DLL fix on some ADS boards needed for more - stability. + CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN DLL fix on some ADS boards needed + for more stability. CONFIG_HAS_FEC If an FEC is on chip, set to 1, else 0. Other than the above definitions, the rest in the config files are -- cgit