From 6b2450143882987f4287ea78783866c5f9ac4aff Mon Sep 17 00:00:00 2001 From: Siva Durga Prasad Paladugu Date: Wed, 13 Jan 2016 16:25:37 +0530 Subject: fpga: xilinx: zynqmp: Add PL bitstream download support for ZynqMP Add PL bitstream dowload support for ZynqMP Bitstream will be validated by uboot and loaded to PL by invoking an smc instruction to ATF which route this request to PMU FW which will take care of loading it to PL Signed-off-by: Siva Durga Prasad Paladugu Signed-off-by: Michal Simek --- drivers/fpga/zynqmppl.c | 238 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 238 insertions(+) create mode 100644 drivers/fpga/zynqmppl.c (limited to 'drivers/fpga/zynqmppl.c') diff --git a/drivers/fpga/zynqmppl.c b/drivers/fpga/zynqmppl.c new file mode 100644 index 0000000000..23039c3eb2 --- /dev/null +++ b/drivers/fpga/zynqmppl.c @@ -0,0 +1,238 @@ +/* + * (C) Copyright 2015 - 2016, Xilinx, Inc, + * Michal Simek + * Siva Durga Prasad + * + * SPDX-License-Identifier: GPL-2.0 + */ + +#include +#include +#include +#include + +#define DUMMY_WORD 0xffffffff + +/* Xilinx binary format header */ +static const u32 bin_format[] = { + DUMMY_WORD, /* Dummy words */ + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + DUMMY_WORD, + 0x000000bb, /* Sync word */ + 0x11220044, /* Sync word */ + DUMMY_WORD, + DUMMY_WORD, + 0xaa995566, /* Sync word */ +}; + +#define SWAP_NO 1 +#define SWAP_DONE 2 + +/* + * Load the whole word from unaligned buffer + * Keep in your mind that it is byte loading on little-endian system + */ +static u32 load_word(const void *buf, u32 swap) +{ + u32 word = 0; + u8 *bitc = (u8 *)buf; + int p; + + if (swap == SWAP_NO) { + for (p = 0; p < 4; p++) { + word <<= 8; + word |= bitc[p]; + } + } else { + for (p = 3; p >= 0; p--) { + word <<= 8; + word |= bitc[p]; + } + } + + return word; +} + +static u32 check_header(const void *buf) +{ + u32 i, pattern; + int swap = SWAP_NO; + u32 *test = (u32 *)buf; + + debug("%s: Let's check bitstream header\n", __func__); + + /* Checking that passing bin is not a bitstream */ + for (i = 0; i < ARRAY_SIZE(bin_format); i++) { + pattern = load_word(&test[i], swap); + + /* + * Bitstreams in binary format are swapped + * compare to regular bistream. + * Do not swap dummy word but if swap is done assume + * that parsing buffer is binary format + */ + if ((__swab32(pattern) != DUMMY_WORD) && + (__swab32(pattern) == bin_format[i])) { + swap = SWAP_DONE; + debug("%s: data swapped - let's swap\n", __func__); + } + + debug("%s: %d/%px: pattern %x/%x bin_format\n", __func__, i, + &test[i], pattern, bin_format[i]); + } + debug("%s: Found bitstream header at %px %s swapinng\n", __func__, + buf, swap == SWAP_NO ? "without" : "with"); + + return swap; +} + +static void *check_data(u8 *buf, size_t bsize, u32 *swap) +{ + u32 word, p = 0; /* possition */ + + /* Because buf doesn't need to be aligned let's read it by chars */ + for (p = 0; p < bsize; p++) { + word = load_word(&buf[p], SWAP_NO); + debug("%s: word %x %x/%px\n", __func__, word, p, &buf[p]); + + /* Find the first bitstream dummy word */ + if (word == DUMMY_WORD) { + debug("%s: Found dummy word at position %x/%px\n", + __func__, p, &buf[p]); + *swap = check_header(&buf[p]); + if (*swap) { + /* FIXME add full bitstream checking here */ + return &buf[p]; + } + } + /* Loop can be huge - support CTRL + C */ + if (ctrlc()) + return NULL; + } + return NULL; +} + +static ulong zynqmp_align_dma_buffer(u32 *buf, u32 len, u32 swap) +{ + u32 *new_buf; + u32 i; + + if ((ulong)buf != ALIGN((ulong)buf, ARCH_DMA_MINALIGN)) { + new_buf = (u32 *)ALIGN((ulong)buf, ARCH_DMA_MINALIGN); + + /* + * This might be dangerous but permits to flash if + * ARCH_DMA_MINALIGN is greater than header size + */ + if (new_buf > (u32 *)buf) { + debug("%s: Aligned buffer is after buffer start\n", + __func__); + new_buf -= ARCH_DMA_MINALIGN; + } + printf("%s: Align buffer at %px to %px(swap %d)\n", __func__, + buf, new_buf, swap); + + for (i = 0; i < (len/4); i++) + new_buf[i] = load_word(&buf[i], swap); + + buf = new_buf; + } else if (swap != SWAP_DONE) { + /* For bitstream which are aligned */ + u32 *new_buf = (u32 *)buf; + + printf("%s: Bitstream is not swapped(%d) - swap it\n", __func__, + swap); + + for (i = 0; i < (len/4); i++) + new_buf[i] = load_word(&buf[i], swap); + } + + return (ulong)buf; +} + +static int zynqmp_validate_bitstream(xilinx_desc *desc, const void *buf, + size_t bsize, u32 blocksize, u32 *swap) +{ + ulong *buf_start; + ulong diff; + + buf_start = check_data((u8 *)buf, blocksize, swap); + + if (!buf_start) + return FPGA_FAIL; + + /* Check if data is postpone from start */ + diff = (ulong)buf_start - (ulong)buf; + if (diff) { + printf("%s: Bitstream is not validated yet (diff %lx)\n", + __func__, diff); + return FPGA_FAIL; + } + + if ((ulong)buf < SZ_1M) { + printf("%s: Bitstream has to be placed up to 1MB (%px)\n", + __func__, buf); + return FPGA_FAIL; + } + + return 0; +} + +static int invoke_smc(ulong id, ulong reg0, ulong reg1, ulong reg2) +{ + struct pt_regs regs; + regs.regs[0] = id; + regs.regs[1] = reg0; + regs.regs[2] = reg1; + regs.regs[3] = reg2; + + smc_call(®s); + + return regs.regs[0]; +} + +static int zynqmp_load(xilinx_desc *desc, const void *buf, size_t bsize, + bitstream_type bstype) +{ + u32 swap; + ulong bin_buf, flags; + int ret; + + if (zynqmp_validate_bitstream(desc, buf, bsize, bsize, &swap)) + return FPGA_FAIL; + + bin_buf = zynqmp_align_dma_buffer((u32 *)buf, bsize, swap); + + debug("%s called!\n", __func__); + flush_dcache_range(bin_buf, bin_buf + bsize); + + if (bsize % 4) + bsize = bsize / 4 + 1; + else + bsize = bsize / 4; + + flags = (u32)bsize | ((u64)bstype << 32); + + ret = invoke_smc(ZYNQMP_SIP_SVC_PM_FPGA_LOAD, bin_buf, flags, 0); + if (ret) + debug("PL FPGA LOAD fail\n"); + + return ret; +} + +struct xilinx_fpga_op zynqmp_op = { + .load = zynqmp_load, +}; -- cgit