From c45912d8abc52de796b9059a58faf7c4166eab58 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Fri, 24 Oct 2008 16:20:43 -0500 Subject: NAND: sync with 2.6.27 This brings the core NAND code up to date with the Linux kernel. Since there were several drivers in Linux as of the last update that are not in u-boot, I'm not bringing over new drivers that have been added since in the absence of an interested party. I did not update OneNAND since it was recently synced by Kyungmin Park, and I'm not sure exactly what the common ancestor is. Signed-off-by: Scott Wood --- drivers/mtd/nand/nand_base.c | 127 ++++++++++++++++++++++++++++++++++++++++--- 1 file changed, 119 insertions(+), 8 deletions(-) (limited to 'drivers/mtd/nand/nand_base.c') diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index fe34a4864b..4069ab1278 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -7,7 +7,7 @@ * Basic support for AG-AND chips is provided. * * Additional technical information is available on - * http://www.linux-mtd.infradead.org/tech/nand.html + * http://www.linux-mtd.infradead.org/doc/nand.html * * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) * 2002-2006 Thomas Gleixner (tglx@linutronix.de) @@ -24,6 +24,7 @@ * if we have HW ecc support. * The AG-AND chips have nice features for speed improvement, * which are not supported yet. Read / program 4 pages in one go. + * BBT table is not serialized, has to be fixed * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -128,7 +129,7 @@ static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, static int nand_wait(struct mtd_info *mtd, struct nand_chip *this); /* - * For devices which display every fart in the system on a seperate LED. Is + * For devices which display every fart in the system on a separate LED. Is * compiled away when LED support is disabled. */ /* XXX U-BOOT XXX */ @@ -412,6 +413,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) /* We write two bytes, so we dont have to mess with 16 bit * access */ + nand_get_device(chip, mtd, FL_WRITING); ofs += mtd->oobsize; chip->ops.len = chip->ops.ooblen = 2; chip->ops.datbuf = NULL; @@ -419,9 +421,11 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) chip->ops.ooboffs = chip->badblockpos & ~0x01; ret = nand_do_write_oob(mtd, ofs, &chip->ops); + nand_release_device(mtd); } if (!ret) mtd->ecc_stats.badblocks++; + return ret; } @@ -911,7 +915,88 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, int stat; stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); - if (stat == -1) + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + } + return 0; +} + +/** + * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @dataofs offset of requested data within the page + * @readlen data length + * @buf: buffer to store read data + */ +static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi) +{ + int start_step, end_step, num_steps; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint8_t *p; + int data_col_addr, i, gaps = 0; + int datafrag_len, eccfrag_len, aligned_len, aligned_pos; + int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1; + + /* Column address wihin the page aligned to ECC size (256bytes). */ + start_step = data_offs / chip->ecc.size; + end_step = (data_offs + readlen - 1) / chip->ecc.size; + num_steps = end_step - start_step + 1; + + /* Data size aligned to ECC ecc.size*/ + datafrag_len = num_steps * chip->ecc.size; + eccfrag_len = num_steps * chip->ecc.bytes; + + data_col_addr = start_step * chip->ecc.size; + /* If we read not a page aligned data */ + if (data_col_addr != 0) + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1); + + p = bufpoi + data_col_addr; + chip->read_buf(mtd, p, datafrag_len); + + /* Calculate ECC */ + for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) + chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]); + + /* The performance is faster if to position offsets + according to ecc.pos. Let make sure here that + there are no gaps in ecc positions */ + for (i = 0; i < eccfrag_len - 1; i++) { + if (eccpos[i + start_step * chip->ecc.bytes] + 1 != + eccpos[i + start_step * chip->ecc.bytes + 1]) { + gaps = 1; + break; + } + } + if (gaps) { + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + } else { + /* send the command to read the particular ecc bytes */ + /* take care about buswidth alignment in read_buf */ + aligned_pos = eccpos[start_step * chip->ecc.bytes] & ~(busw - 1); + aligned_len = eccfrag_len; + if (eccpos[start_step * chip->ecc.bytes] & (busw - 1)) + aligned_len++; + if (eccpos[(start_step + num_steps) * chip->ecc.bytes] & (busw - 1)) + aligned_len++; + + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize + aligned_pos, -1); + chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len); + } + + for (i = 0; i < eccfrag_len; i++) + chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + start_step * chip->ecc.bytes]]; + + p = bufpoi + data_col_addr; + for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) { + int stat; + + stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]); + if (stat < 0) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; @@ -996,7 +1081,7 @@ static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, chip->read_buf(mtd, oob, eccbytes); stat = chip->ecc.correct(mtd, p, oob, NULL); - if (stat == -1) + if (stat < 0) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; @@ -1116,6 +1201,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, /* Now read the page into the buffer */ if (unlikely(ops->mode == MTD_OOB_RAW)) ret = chip->ecc.read_page_raw(mtd, chip, bufpoi); + else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob) + ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi); else ret = chip->ecc.read_page(mtd, chip, bufpoi); if (ret < 0) @@ -1123,7 +1210,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, /* Transfer not aligned data */ if (!aligned) { - chip->pagebuf = realpage; + if (!NAND_SUBPAGE_READ(chip) && !oob) + chip->pagebuf = realpage; memcpy(buf, chip->buffers->databuf + col, bytes); } @@ -2193,13 +2281,14 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, erase_exit: ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO; - /* Do call back function */ - if (!ret) - mtd_erase_callback(instr); /* Deselect and wake up anyone waiting on the device */ nand_release_device(mtd); + /* Do call back function */ + if (!ret) + mtd_erase_callback(instr); + /* * If BBT requires refresh and erase was successful, rewrite any * selected bad block tables @@ -2356,6 +2445,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, { struct nand_flash_dev *type = NULL; int i, dev_id, maf_idx; + int tmp_id, tmp_manf; /* Select the device */ chip->select_chip(mtd, 0); @@ -2367,6 +2457,26 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, *maf_id = chip->read_byte(mtd); dev_id = chip->read_byte(mtd); + /* Try again to make sure, as some systems the bus-hold or other + * interface concerns can cause random data which looks like a + * possibly credible NAND flash to appear. If the two results do + * not match, ignore the device completely. + */ + + chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); + + /* Read manufacturer and device IDs */ + + tmp_manf = chip->read_byte(mtd); + tmp_id = chip->read_byte(mtd); + + if (tmp_manf != *maf_id || tmp_id != dev_id) { + printk(KERN_INFO "%s: second ID read did not match " + "%02x,%02x against %02x,%02x\n", __func__, + *maf_id, dev_id, tmp_manf, tmp_id); + return ERR_PTR(-ENODEV); + } + /* Lookup the flash id */ for (i = 0; nand_flash_ids[i].name != NULL; i++) { if (dev_id == nand_flash_ids[i].id) { @@ -2630,6 +2740,7 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.calculate = nand_calculate_ecc; chip->ecc.correct = nand_correct_data; chip->ecc.read_page = nand_read_page_swecc; + chip->ecc.read_subpage = nand_read_subpage; chip->ecc.write_page = nand_write_page_swecc; chip->ecc.read_oob = nand_read_oob_std; chip->ecc.write_oob = nand_write_oob_std; -- cgit