From 1767ac2d1f7fadc0780f95243906dda7553ac77a Mon Sep 17 00:00:00 2001 From: Patrick Delaunay Date: Wed, 10 Apr 2019 14:09:26 +0200 Subject: stm32mp1: ram: add support for LPDDR2/LPDDR3 Manage power supply configuration for board using stpmic1 with LPDDR2 or with LPDDR3: + VDD_DDR1 = 1.8V with BUCK3 (bypass if possible) + VDD_DDR2 = 1.2V with BUCK2 Signed-off-by: Patrick Delaunay --- drivers/ram/stm32mp1/stm32mp1_ddr.c | 11 ++++++++--- drivers/ram/stm32mp1/stm32mp1_ddr_regs.h | 2 ++ 2 files changed, 10 insertions(+), 3 deletions(-) (limited to 'drivers/ram/stm32mp1') diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr.c b/drivers/ram/stm32mp1/stm32mp1_ddr.c index 5e1041dffe..cfd223e37f 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr.c +++ b/drivers/ram/stm32mp1/stm32mp1_ddr.c @@ -372,7 +372,7 @@ void stm32mp1_refresh_restore(struct stm32mp1_ddrctl *ctl, } /* board-specific DDR power initializations. */ -__weak int board_ddr_power_init(void) +__weak int board_ddr_power_init(enum ddr_type ddr_type) { return 0; } @@ -382,9 +382,14 @@ void stm32mp1_ddr_init(struct ddr_info *priv, const struct stm32mp1_ddr_config *config) { u32 pir; - int ret; + int ret = -EINVAL; - ret = board_ddr_power_init(); + if (config->c_reg.mstr & DDRCTRL_MSTR_DDR3) + ret = board_ddr_power_init(STM32MP_DDR3); + else if (config->c_reg.mstr & DDRCTRL_MSTR_LPDDR2) + ret = board_ddr_power_init(STM32MP_LPDDR2); + else if (config->c_reg.mstr & DDRCTRL_MSTR_LPDDR3) + ret = board_ddr_power_init(STM32MP_LPDDR3); if (ret) panic("ddr power init failed\n"); diff --git a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h index a606b2bcbe..97f268e66d 100644 --- a/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h +++ b/drivers/ram/stm32mp1/stm32mp1_ddr_regs.h @@ -234,6 +234,8 @@ struct stm32mp1_ddrphy { /* DDRCTRL REGISTERS */ #define DDRCTRL_MSTR_DDR3 BIT(0) +#define DDRCTRL_MSTR_LPDDR2 BIT(2) +#define DDRCTRL_MSTR_LPDDR3 BIT(3) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_MASK GENMASK(13, 12) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_FULL (0 << 12) #define DDRCTRL_MSTR_DATA_BUS_WIDTH_HALF (1 << 12) -- cgit