From 4a4ced0b6fde31fe28395e710bcee36f82f29730 Mon Sep 17 00:00:00 2001 From: Stefan Brüns Date: Tue, 8 Sep 2015 05:12:00 +0200 Subject: smsc95xx: Use zero length packets when RX fifo is empty MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Using NAKs on empty RX fifo for bulk in transfers is the right choice for a interrupt driven model, but U-Boot uses polling and expects an immediate answer if there is no incoming packet. Using ZLP Bulk In Response (BIR) mode avoids unexpected timeouts in the host controller driver. As ZLP mode is reset default, there is no need to set it. Signed-off-by: Stefan Brüns Acked-by: Joe Hershberger --- drivers/usb/eth/smsc95xx.c | 16 ---------------- 1 file changed, 16 deletions(-) (limited to 'drivers/usb/eth/smsc95xx.c') diff --git a/drivers/usb/eth/smsc95xx.c b/drivers/usb/eth/smsc95xx.c index 0f47ccb0b2..e694364122 100644 --- a/drivers/usb/eth/smsc95xx.c +++ b/drivers/usb/eth/smsc95xx.c @@ -530,22 +530,6 @@ static int smsc95xx_init_common(struct usb_device *udev, struct ueth_data *dev, if (ret < 0) return ret; - ret = smsc95xx_read_reg(udev, HW_CFG, &read_buf); - if (ret < 0) - return ret; - debug("Read Value from HW_CFG : 0x%08x\n", read_buf); - - read_buf |= HW_CFG_BIR_; - ret = smsc95xx_write_reg(udev, HW_CFG, read_buf); - if (ret < 0) - return ret; - - ret = smsc95xx_read_reg(udev, HW_CFG, &read_buf); - if (ret < 0) - return ret; - debug("Read Value from HW_CFG after writing " - "HW_CFG_BIR_: 0x%08x\n", read_buf); - #ifdef TURBO_MODE if (dev->pusb_dev->speed == USB_SPEED_HIGH) { burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE; -- cgit