From c322d4b72ba02d7b531e4814c46ed2098f3397f1 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Tue, 12 Sep 2017 19:07:25 +0200 Subject: usb: Drop the EHCI RCar Gen3 Since we use EHCI generic driver on RCar Gen3 , this driver is useless. Remove it. Signed-off-by: Marek Vasut Cc: Nobuhiro Iwamatsu Acked-by: Nobuhiro Iwamatsu Signed-off-by: Nobuhiro Iwamatsu --- drivers/usb/host/ehci-rcar_gen3.c | 106 -------------------------------------- 1 file changed, 106 deletions(-) delete mode 100644 drivers/usb/host/ehci-rcar_gen3.c (limited to 'drivers/usb/host/ehci-rcar_gen3.c') diff --git a/drivers/usb/host/ehci-rcar_gen3.c b/drivers/usb/host/ehci-rcar_gen3.c deleted file mode 100644 index 525e7f3573..0000000000 --- a/drivers/usb/host/ehci-rcar_gen3.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * drivers/usb/host/ehci-rcar_gen3. - * This file is EHCI HCD (Host Controller Driver) for USB. - * - * Copyright (C) 2015-2017 Renesas Electronics Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include -#include "ehci.h" - -#define RCAR_GEN3_USB_BASE(n) (0xEE080000 + ((n) * 0x20000)) - -#define EHCI_USBCMD 0x120 - -#define CORE_SPD_RSM_TIMSET 0x30c -#define CORE_OC_TIMSET 0x310 - -/* Register offset */ -#define AHB_OFFSET 0x200 - -#define BASE_HSUSB 0xE6590000 -#define REG_LPSTS (BASE_HSUSB + 0x0102) /* 16bit */ -#define SUSPM 0x4000 -#define SUSPM_NORMAL BIT(14) -#define REG_UGCTRL2 (BASE_HSUSB + 0x0184) /* 32bit */ -#define USB0SEL 0x00000030 -#define USB0SEL_EHCI 0x00000010 - -#define SMSTPCR7 0xE615014C -#define SMSTPCR700 BIT(0) /* EHCI3 */ -#define SMSTPCR701 BIT(1) /* EHCI2 */ -#define SMSTPCR702 BIT(2) /* EHCI1 */ -#define SMSTPCR703 BIT(3) /* EHCI0 */ -#define SMSTPCR704 BIT(4) /* HSUSB */ - -#define AHB_PLL_RST BIT(1) - -#define USBH_INTBEN BIT(2) -#define USBH_INTAEN BIT(1) - -#define AHB_INT_ENABLE 0x200 -#define AHB_USBCTR 0x20c - -int ehci_hcd_stop(int index) -{ -#if defined(CONFIG_R8A7795) - const u32 mask = SMSTPCR703 | SMSTPCR702 | SMSTPCR701 | SMSTPCR700; -#else - const u32 mask = SMSTPCR703 | SMSTPCR702; -#endif - const u32 base = RCAR_GEN3_USB_BASE(index); - int ret; - - /* Reset EHCI */ - setbits_le32((uintptr_t)(base + EHCI_USBCMD), CMD_RESET); - ret = wait_for_bit("ehci-rcar", (void *)(uintptr_t)base + EHCI_USBCMD, - CMD_RESET, false, 10, true); - if (ret) { - printf("ehci-rcar: reset failed (index=%i, ret=%i).\n", - index, ret); - } - - setbits_le32(SMSTPCR7, BIT(3 - index)); - - if ((readl(SMSTPCR7) & mask) == mask) - setbits_le32(SMSTPCR7, SMSTPCR704); - - return 0; -} - -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - const void __iomem *base = - (void __iomem *)(uintptr_t)RCAR_GEN3_USB_BASE(index); - struct usb_ehci *ehci = (struct usb_ehci *)(uintptr_t)base; - - clrbits_le32(SMSTPCR7, BIT(3 - index)); - clrbits_le32(SMSTPCR7, SMSTPCR704); - - *hccr = (struct ehci_hccr *)((uintptr_t)&ehci->caplength); - *hcor = (struct ehci_hcor *)((uintptr_t)*hccr + - HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); - - /* Enable interrupt */ - setbits_le32(base + AHB_INT_ENABLE, USBH_INTBEN | USBH_INTAEN); - writel(0x014e029b, base + CORE_SPD_RSM_TIMSET); - writel(0x000209ab, base + CORE_OC_TIMSET); - - /* Choice USB0SEL */ - clrsetbits_le32(REG_UGCTRL2, USB0SEL, USB0SEL_EHCI); - - /* Clock & Reset */ - clrbits_le32(base + AHB_USBCTR, AHB_PLL_RST); - - /* low power status */ - clrsetbits_le16(REG_LPSTS, SUSPM, SUSPM_NORMAL); - - return 0; -} -- cgit