From e38ff30a556fa02fd406cf73387e227b459cc49a Mon Sep 17 00:00:00 2001 From: Adrian Alonso Date: Thu, 6 Aug 2015 15:43:15 -0500 Subject: imx: usb: ehci-mx6: reg accessor cleanups Cleanup read/write register access, use clr/set bits_le32 Signed-off-by: Adrian Alonso --- drivers/usb/host/ehci-mx6.c | 51 ++++++++++++++++----------------------------- 1 file changed, 18 insertions(+), 33 deletions(-) (limited to 'drivers') diff --git a/drivers/usb/host/ehci-mx6.c b/drivers/usb/host/ehci-mx6.c index 951dd3b25f..0f94c8b6fb 100644 --- a/drivers/usb/host/ehci-mx6.c +++ b/drivers/usb/host/ehci-mx6.c @@ -67,7 +67,7 @@ static void usb_internal_phy_clock_gate(int index, int on) phy_reg = (void __iomem *)phy_bases[index]; phy_reg += on ? USBPHY_CTRL_CLR : USBPHY_CTRL_SET; - __raw_writel(USBPHY_CTRL_CLKGATE, phy_reg); + writel(USBPHY_CTRL_CLKGATE, phy_reg); } static void usb_power_config(int index) @@ -100,14 +100,14 @@ static void usb_power_config(int index) * is totally controlled by IC, so the Software only needs * to enable them at initializtion. */ - __raw_writel(ANADIG_USB2_CHRG_DETECT_EN_B | + writel(ANADIG_USB2_CHRG_DETECT_EN_B | ANADIG_USB2_CHRG_DETECT_CHK_CHRG_B, chrg_detect); - __raw_writel(ANADIG_USB2_PLL_480_CTRL_BYPASS, + writel(ANADIG_USB2_PLL_480_CTRL_BYPASS, pll_480_ctrl_clr); - __raw_writel(ANADIG_USB2_PLL_480_CTRL_ENABLE | + writel(ANADIG_USB2_PLL_480_CTRL_ENABLE | ANADIG_USB2_PLL_480_CTRL_POWER | ANADIG_USB2_PLL_480_CTRL_EN_USB_CLKS, pll_480_ctrl_set); @@ -119,7 +119,6 @@ static int usb_phy_enable(int index, struct usb_ehci *ehci) void __iomem *phy_reg; void __iomem *phy_ctrl; void __iomem *usb_cmd; - u32 val; if (index >= ARRAY_SIZE(phy_bases)) return 0; @@ -129,36 +128,27 @@ static int usb_phy_enable(int index, struct usb_ehci *ehci) usb_cmd = (void __iomem *)&ehci->usbcmd; /* Stop then Reset */ - val = __raw_readl(usb_cmd); - val &= ~UCMD_RUN_STOP; - __raw_writel(val, usb_cmd); - while (__raw_readl(usb_cmd) & UCMD_RUN_STOP) + clrbits_le32(usb_cmd, UCMD_RUN_STOP); + while (readl(usb_cmd) & UCMD_RUN_STOP) ; - val = __raw_readl(usb_cmd); - val |= UCMD_RESET; - __raw_writel(val, usb_cmd); - while (__raw_readl(usb_cmd) & UCMD_RESET) + setbits_le32(usb_cmd, UCMD_RESET); + while (readl(usb_cmd) & UCMD_RESET) ; /* Reset USBPHY module */ - val = __raw_readl(phy_ctrl); - val |= USBPHY_CTRL_SFTRST; - __raw_writel(val, phy_ctrl); + setbits_le32(phy_ctrl, USBPHY_CTRL_SFTRST); udelay(10); /* Remove CLKGATE and SFTRST */ - val = __raw_readl(phy_ctrl); - val &= ~(USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST); - __raw_writel(val, phy_ctrl); + clrbits_le32(phy_ctrl, USBPHY_CTRL_CLKGATE | USBPHY_CTRL_SFTRST); udelay(10); /* Power up the PHY */ - __raw_writel(0, phy_reg + USBPHY_PWD); + writel(0, phy_reg + USBPHY_PWD); /* enable FS/LS device */ - val = __raw_readl(phy_ctrl); - val |= (USBPHY_CTRL_ENUTMILEVEL2 | USBPHY_CTRL_ENUTMILEVEL3); - __raw_writel(val, phy_ctrl); + setbits_le32(phy_ctrl, USBPHY_CTRL_ENUTMILEVEL2 | + USBPHY_CTRL_ENUTMILEVEL3); return 0; } @@ -177,20 +167,15 @@ static void usb_oc_config(int index) struct usbnc_regs *usbnc = (struct usbnc_regs *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET); void __iomem *ctrl = (void __iomem *)(&usbnc->ctrl[index]); - u32 val; - val = __raw_readl(ctrl); #if CONFIG_MACH_TYPE == MACH_TYPE_MX6Q_ARM2 /* mx6qarm2 seems to required a different setting*/ - val &= ~UCTRL_OVER_CUR_POL; + clrbits_le32(ctrl, UCTRL_OVER_CUR_POL); #else - val |= UCTRL_OVER_CUR_POL; + setbits_le32(ctrl, UCTRL_OVER_CUR_POL); #endif - __raw_writel(val, ctrl); - val = __raw_readl(ctrl); - val |= UCTRL_OVER_CUR_DIS; - __raw_writel(val, ctrl); + setbits_le32(ctrl, UCTRL_OVER_CUR_DIS); } int usb_phy_mode(int port) @@ -202,7 +187,7 @@ int usb_phy_mode(int port) phy_reg = (void __iomem *)phy_bases[port]; phy_ctrl = (void __iomem *)(phy_reg + USBPHY_CTRL); - val = __raw_readl(phy_ctrl); + val = readl(phy_ctrl); if (val & USBPHY_CTRL_OTG_ID) return USB_INIT_DEVICE; @@ -257,7 +242,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, if (type == USB_INIT_DEVICE) return 0; setbits_le32(&ehci->usbmode, CM_HOST); - __raw_writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc); + writel(CONFIG_MXC_USB_PORTSC, &ehci->portsc); setbits_le32(&ehci->portsc, USB_EN); mdelay(10); -- cgit