From 23b80982a02a43bf4ead91574c9d6f1b647ccc8f Mon Sep 17 00:00:00 2001 From: Tom Rix Date: Sun, 27 Sep 2009 11:10:09 -0500 Subject: Add support for Eukrea CPU9260/CPU9G20 SBC these boards are built around Atmel's AT91SAM9260/9G20 and have up to 64MB of NOR flash, up to 128MB of SDRAM, up to 2GB of NAND and include a 10/100 Ethernet PHY in RMII mode. Signed-off-by: Eric Benard Signed-off-by: Tom Rix --- include/configs/cpu9260.h | 453 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 453 insertions(+) create mode 100644 include/configs/cpu9260.h (limited to 'include/configs/cpu9260.h') diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h new file mode 100644 index 0000000000..4ef8566ea2 --- /dev/null +++ b/include/configs/cpu9260.h @@ -0,0 +1,453 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop + * Lead Tech Design + * Ilko Iliev + * + * (C) Copyright 2009 + * Eric Benard + * + * Configuration settings for the Eukrea CPU9260 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_DISPLAY_CPUINFO 1 + +#define AT91_MAIN_CLOCK 18432000 +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_ARM926EJS 1 + +#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9260) +#define CONFIG_CPU9260 1 +#elif defined(CONFIG_CPU9G20_128M) || defined(CONFIG_CPU9G20) +#define CONFIG_CPU9G20 1 +#endif + +#if defined(CONFIG_CPU9G20) +#define CONFIG_AT91SAM9G20 1 +#elif defined(CONFIG_CPU9260) +#define CONFIG_AT91SAM9260 1 +#else +#error "Unknown board" +#endif + +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_USE_IRQ + +#define CONFIG_CMDLINE_TAG 1 +#define CONFIG_SETUP_MEMORY_TAGS 1 +#define CONFIG_INITRD_TAG 1 + +/* clocks */ +#if defined(CONFIG_CPU9G20) +#define MASTER_PLL_DIV 0x01 +#define MASTER_PLL_MUL 0x2B +#elif defined(CONFIG_CPU9260) +#define MASTER_PLL_DIV 0x09 +#define MASTER_PLL_MUL 0x61 +#endif + +/* CKGR_MOR - enable main osc. */ +#define CONFIG_SYS_MOR_VAL \ + (AT91_PMC_MOSCEN | \ + (255 << 8)) /* Main Oscillator Start-up Time */ +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_PLLAR_VAL \ + (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_PLLAR_VAL \ + (AT91_PMC_PLLA_WR_ERRATA | /* Bit 29 must be 1 when prog */ \ + AT91_PMC_OUT | \ + ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV)) +#endif + +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_MCKR1_VAL \ + (AT91_PMC_CSS_PLLA | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_6 | \ + AT91_PMC_PDIV_2) +#define CONFIG_SYS_MCKR2_VAL \ + CONFIG_SYS_MCKR1_VAL +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_MCKR1_VAL \ + (AT91_PMC_CSS_SLOW | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_2 | \ + AT91_PMC_PDIV_1) +#define CONFIG_SYS_MCKR2_VAL \ + (AT91_PMC_CSS_PLLA | \ + AT91_PMC_PRES_1 | \ + AT91SAM9_PMC_MDIV_2 | \ + AT91_PMC_PDIV_1) +#endif + +/* define PDC[31:16] as DATA[31:16] */ +#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000 +/* no pull-up for D[31:16] */ +#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000 + +/* EBI_CSA, 3.3V, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */ +#define CONFIG_SYS_MATRIX_EBICSA_VAL \ + (AT91_MATRIX_DBPUC | AT91_MATRIX_CS1A_SDRAMC |\ + AT91_MATRIX_CS3A_SMC_SMARTMEDIA | AT91_MATRIX_VDDIOMSEL) + +/* SDRAM */ +/* SDRAMC_MR Mode register */ +#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL +/* SDRAMC_TR - Refresh Timer register */ +#define CONFIG_SYS_SDRC_TR_VAL1 0x287 +/* SDRAMC_CR - Configuration register*/ +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_SDRC_CR_VAL_64MB \ + (AT91_SDRAMC_NC_9 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_2 | \ + AT91_SDRAMC_DBW_32 | \ + (2 << 8) | /* Write Recovery Delay */ \ + (9 << 12) | /* Row Cycle Delay */ \ + (3 << 16) | /* Row Precharge Delay */ \ + (3 << 20) | /* Row to Column Delay */ \ + (6 << 24) | /* Active to Precharge Delay */ \ + (10 << 28)) /* Exit Self Refresh to Active Delay */ + +#define CONFIG_SYS_SDRC_CR_VAL_128MB \ + (AT91_SDRAMC_NC_10 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_2 | \ + AT91_SDRAMC_DBW_32 | \ + (2 << 8) | /* Write Recovery Delay */ \ + (9 << 12) | /* Row Cycle Delay */ \ + (3 << 16) | /* Row Precharge Delay */ \ + (3 << 20) | /* Row to Column Delay */ \ + (6 << 24) | /* Active to Precharge Delay */ \ + (10 << 28)) /* Exit Self Refresh to Active Delay */ +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_SDRC_CR_VAL_64MB \ + (AT91_SDRAMC_NC_9 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_2 | \ + AT91_SDRAMC_DBW_32 | \ + (2 << 8) | /* Write Recovery Delay */ \ + (7 << 12) | /* Row Cycle Delay */ \ + (2 << 16) | /* Row Precharge Delay */ \ + (2 << 20) | /* Row to Column Delay */ \ + (5 << 24) | /* Active to Precharge Delay */ \ + (8 << 28)) /* Exit Self Refresh to Active Delay */ + +#define CONFIG_SYS_SDRC_CR_VAL_128MB \ + (AT91_SDRAMC_NC_10 | \ + AT91_SDRAMC_NR_13 | \ + AT91_SDRAMC_NB_4 | \ + AT91_SDRAMC_CAS_2 | \ + AT91_SDRAMC_DBW_32 | \ + (2 << 8) | /* Write Recovery Delay */ \ + (7 << 12) | /* Row Cycle Delay */ \ + (2 << 16) | /* Row Precharge Delay */ \ + (2 << 20) | /* Row to Column Delay */ \ + (5 << 24) | /* Active to Precharge Delay */ \ + (8 << 28)) /* Exit Self Refresh to Active Delay */ +#endif + +/* Memory Device Register -> SDRAM */ +#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM +#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE +#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH +#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR +#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL +#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */ +#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */ +#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */ + +/* setup SMC0, CS0 (NOR Flash) - 16-bit */ +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_SMC0_SETUP0_VAL \ + (AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | \ + AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)) +#define CONFIG_SYS_SMC0_PULSE0_VAL \ + (AT91_SMC_NWEPULSE_(8) | AT91_SMC_NCS_WRPULSE_(8) | \ + AT91_SMC_NRDPULSE_(14) | AT91_SMC_NCS_RDPULSE_(14)) +#define CONFIG_SYS_SMC0_CYCLE0_VAL \ + (AT91_SMC_NWECYCLE_(8) | AT91_SMC_NRDCYCLE_(14)) +#define CONFIG_SYS_SMC0_MODE0_VAL \ + (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ + AT91_SMC_DBW_16 | \ + AT91_SMC_TDFMODE | \ + AT91_SMC_TDF_(3)) +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_SMC0_SETUP0_VAL \ + (AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | \ + AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)) +#define CONFIG_SYS_SMC0_PULSE0_VAL \ + (AT91_SMC_NWEPULSE_(6) | AT91_SMC_NCS_WRPULSE_(6) | \ + AT91_SMC_NRDPULSE_(10) | AT91_SMC_NCS_RDPULSE_(10)) +#define CONFIG_SYS_SMC0_CYCLE0_VAL \ + (AT91_SMC_NWECYCLE_(6) | AT91_SMC_NRDCYCLE_(10)) +#define CONFIG_SYS_SMC0_MODE0_VAL \ + (AT91_SMC_READMODE | AT91_SMC_WRITEMODE | \ + AT91_SMC_DBW_16 | \ + AT91_SMC_TDFMODE | \ + AT91_SMC_TDF_(2)) +#endif + +/* user reset enable */ +#define CONFIG_SYS_RSTC_RMR_VAL \ + (AT91_RSTC_KEY | \ + AT91_RSTC_PROCRST | \ + AT91_RSTC_RSTTYP_WAKEUP | \ + AT91_RSTC_RSTTYP_WATCHDOG) + +/* Disable Watchdog */ +#define CONFIG_SYS_WDTC_WDMR_VAL \ + (AT91_WDT_WDIDLEHLT | AT91_WDT_WDDBGHLT | \ + AT91_WDT_WDV | \ + AT91_WDT_WDDIS | \ + AT91_WDT_WDD) + +/* + * Hardware drivers + */ +#define CONFIG_ATMEL_USART 1 +#undef CONFIG_USART0 +#undef CONFIG_USART1 +#undef CONFIG_USART2 +#define CONFIG_USART3 1 /* USART 3 is DBGU */ + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE 1 +#define CONFIG_BOOTP_BOOTPATH 1 +#define CONFIG_BOOTP_GATEWAY 1 +#define CONFIG_BOOTP_HOSTNAME 1 + +/* + * Command line configuration. + */ +#include +#undef CONFIG_CMD_BDI +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_LOADS +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_PING 1 +#define CONFIG_CMD_DHCP 1 +#define CONFIG_CMD_NAND 1 +#define CONFIG_CMD_USB 1 +#define CONFIG_CMD_FAT 1 + +/* SDRAM */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM 0x20000000 +#if defined(CONFIG_CPU9260_128M) || defined(CONFIG_CPU9G20_128M) +#define PHYS_SDRAM_SIZE 0x08000000 /* 128 MB */ +#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_128MB +#else +#define PHYS_SDRAM_SIZE 0x04000000 /* 64 MB */ +#define CONFIG_SYS_SDRC_CR_VAL CONFIG_SYS_SDRC_CR_VAL_64MB +#endif + +/* NAND flash */ +#define CONFIG_NAND_ATMEL 1 +#define NAND_MAX_CHIPS 1 +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BASE 0x40000000 +#define CONFIG_SYS_NAND_DBW_8 1 +#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 +#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 +#define CONFIG_SYS_NAND_MASK_ALE (1 << 21) +#define CONFIG_SYS_NAND_MASK_CLE (1 << 22) + +/* NOR flash */ +#define CONFIG_SYS_FLASH_CFI 1 +#define CONFIG_FLASH_CFI_DRIVER 1 +#define PHYS_FLASH_1 0x10000000 +#define PHYS_FLASH_2 0x12000000 +#define CONFIG_SYS_FLASH_BANKS_LIST \ + { PHYS_FLASH_1, PHYS_FLASH_2 } +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_MAX_FLASH_SECT (255+4) +#define CONFIG_SYS_MAX_FLASH_BANKS 2 +#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT +#define CONFIG_SYS_FLASH_EMPTY_INFO 1 +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 +#define CONFIG_SYS_FLASH_PROTECTION 1 +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 + +/* Ethernet */ +#define CONFIG_MACB 1 +#define CONFIG_RMII 1 +#define CONFIG_RESET_PHY_R 1 +#define CONFIG_NET_MULTI 1 +#define CONFIG_NET_RETRY_COUNT 20 +#define CONFIG_MACB_SEARCH_PHY 1 + +/* LEDS */ +/* Status LED */ +#define CONFIG_STATUS_LED 1 /* Status LED enabled */ +#define CONFIG_BOARD_SPECIFIC_LED 1 +#define STATUS_LED_RED 0 +#define STATUS_LED_GREEN 1 +#define STATUS_LED_YELLOW 2 +#define STATUS_LED_BLUE 3 +/* Red */ +#define STATUS_LED_BIT STATUS_LED_RED +#define STATUS_LED_STATE STATUS_LED_OFF +#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) +/* Green */ +#define STATUS_LED_BIT1 STATUS_LED_GREEN +#define STATUS_LED_STATE1 STATUS_LED_OFF +#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 2) +/* Yellow */ +#define STATUS_LED_BIT2 STATUS_LED_YELLOW +#define STATUS_LED_STATE2 STATUS_LED_OFF +#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) +/* Blue */ +#define STATUS_LED_BIT3 STATUS_LED_BLUE +#define STATUS_LED_STATE3 STATUS_LED_ON +#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) +/* Optional value */ +#define STATUS_LED_BOOT STATUS_LED_BIT + +#define CONFIG_RED_LED AT91_PIN_PC11 +#define CONFIG_GREEN_LED AT91_PIN_PC12 +#define CONFIG_YELLOW_LED AT91_PIN_PC7 +#define CONFIG_BLUE_LED AT91_PIN_PC9 + +/* USB */ +#define CONFIG_USB_ATMEL 1 +#define CONFIG_USB_OHCI_NEW 1 +#define CONFIG_DOS_PARTITION 1 +#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 +#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 +#define CONFIG_USB_STORAGE 1 + +#define CONFIG_SYS_LOAD_ADDR 0x21000000 + +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM +#define CONFIG_SYS_MEMTEST_END 0x21e00000 + +#undef CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SYS_USE_FLASH 1 + +#if defined(CONFIG_SYS_USE_FLASH) +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_OFFSET 0x40000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_SIZE 0x20000 +#define CONFIG_ENV_OVERWRITE 1 + +#define CONFIG_BOOTCOMMAND "run flashboot" + +#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" +#define MTDPARTS_DEFAULT \ + "mtdparts=physmap-flash.0:" \ + "256k(u-boot)ro," \ + "128k(u-boot-env)ro," \ + "1792k(kernel)," \ + "-(rootfs);" \ + "atmel_nand:-(nand)" + +#define CONFIG_BOOTARGS "root=/dev/mtdblock3 rootfstype=jffs2 " + +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_BASEDIR "cpu9G20" +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_BASEDIR "cpu9260" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "mtdids=" MTDIDS_DEFAULT "\0" \ + "mtdparts=" MTDPARTS_DEFAULT "\0" \ + "partition=nand0,0\0" \ + "ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \ + "ramboot=tftpboot 0x22000000 cpu9260/uImage;" \ + "run ramargs;bootm 22000000\0" \ + "flashboot=run ramargs;bootm 0x10060000\0" \ + "basedir=" CONFIG_SYS_BASEDIR "\0" \ + "updtub=tftp 0x24000000 $(basedir)/u-boot.bin;protect " \ + "off 0x10000000 0x1003ffff;erase 0x10000000 " \ + "0x1003ffff;cp.b 0x24000000 0x10000000 " \ + "$(filesize)\0" \ + "updtui=tftp 0x24000000 $(basedir)/uImage;protect off" \ + " 0x10060000 0x1021ffff;erase 0x10060000 " \ + "0x1021ffff;cp.b 0x24000000 0x10060000 " \ + "$(filesize)\0" \ + "updtrfs=tftp 0x24000000 $(basedir)/rootfs.jffs2; " \ + "protect off 0x10220000 0x13ffffff;erase " \ + "0x10220000 0x13ffffff;cp.b 0x24000000 " \ + "0x10220000 $(filesize)\0" \ + "" +#endif + +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 } + +#if defined(CONFIG_CPU9G20) +#define CONFIG_SYS_PROMPT "CPU9G20=> " +#elif defined(CONFIG_CPU9260) +#define CONFIG_SYS_PROMPT "CPU9260=> " +#endif +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP 1 +#define CONFIG_CMDLINE_EDITING 1 +#define CONFIG_SILENT_CONSOLE 1 +#define CONFIG_NETCONSOLE 1 + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN \ + ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000) +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +#define CONFIG_STACKSIZE (32 * 1024) + +#if defined(CONFIG_USE_IRQ) +#error CONFIG_USE_IRQ not supported +#endif + +#endif -- cgit