From 022b02064a04d5edf2dc8e7cdf666421eed9d888 Mon Sep 17 00:00:00 2001 From: Jagannadha Sutradharudu Teki Date: Thu, 9 Jan 2014 01:48:12 +0530 Subject: zynq: Add zynq zc70x board support The Zynq-7000 APSOC zc702 and zc706 enabled complte embedded processing includes ASIC and FPGA design. ZC702-: APSOC: - XC7Z020-CLG484-1 Memory: - DDR3 Component Memory 1GB - 16MB Quad SPI Flash - IIC - 1 KB EEPROM Connectivity: - Gigabit Ethernet GMII, RGMII and SGMII. - USB OTG - Host USB - IIC Bus Headers/HUB - 1 CAN with Wake on CAN - USB-UART Video/Display: - HDMI Video OUT - 8X LEDs Control & I/O: - 3 User Push Buttons - 2 User Switches - 8 User LEDs For more info on zc702 board: - http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC702-G.htm ZC706-: APSOC: - XC7Z045 FFG900 -2 AP SoC Memory: - DDR3 Component Memory 1GB (PS) - DDR3 SODIM Memory 1GB (PL) - 2X16MB Quad SPI Flash (dual parallel) - IIC - 1 KB EEPROM Connectivity: - PCIe Gen2x4 - SFP+ and SMA Pairs - GigE RGMII Ethernet (PS) - USB OTG 1 (PS) - Host USB - IIC Bus Headers/HUB (PS) - 1 CAN with Wake on CAN (PS) - USB-UART Video/Display: - HDMI 8 color RGB 4.4.4 1080P-60 OUT - HDMI IN 8 color RGB 4.4.4 Control & I/O: - 2 User Push Buttons/Dip Switch, 2 User LEDs - IIC access to GPIO - SDIO (SD Card slot) - 3 User Push Buttons, 2 User Switches, 8 User LEDs For more info on zc706 board: - http://www.xilinx.com/products/boards-and-kits/EK-Z7-ZC706-G.htm Signed-off-by: Jagannadha Sutradharudu Teki --- include/configs/zynq_zc70x.h | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 include/configs/zynq_zc70x.h (limited to 'include/configs/zynq_zc70x.h') diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h new file mode 100644 index 0000000000..99108041ff --- /dev/null +++ b/include/configs/zynq_zc70x.h @@ -0,0 +1,25 @@ +/* + * (C) Copyright 2013 Xilinx, Inc. + * + * Configuration settings for the Xilinx Zynq ZC702 and ZC706 boards + * See zynq_common.h for Zynq common configs + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_ZYNQ_ZC70X_H +#define __CONFIG_ZYNQ_ZC70X_H + +#define CONFIG_ZYNQ_SERIAL_UART1 +#define CONFIG_ZYNQ_GEM0 +#define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 + +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ZYNQ_SDHCI0 +#define CONFIG_ZYNQ_I2C0 +#define CONFIG_ZYNQ_BOOT_FREEBSD + +#include + +#endif /* __CONFIG_ZYNQ_ZC70X_H */ -- cgit