From 3098e539d6a67df9f2a3c402d62147fa10422150 Mon Sep 17 00:00:00 2001 From: Hou Zhiqiang Date: Fri, 14 Apr 2017 16:49:01 +0800 Subject: armv8: ls1046a: enable PCI command tool Signed-off-by: Hou Zhiqiang Reviewed-by: York Sun --- include/configs/ls1046a_common.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/configs') diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 957ffd3634..80f8dc2cbb 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -138,6 +138,16 @@ #define CONFIG_SYS_I2C_MXC_I2C3 #define CONFIG_SYS_I2C_MXC_I2C4 +/* PCIe */ +#define CONFIG_PCIE1 /* PCIE controller 1 */ +#define CONFIG_PCIE2 /* PCIE controller 2 */ +#define CONFIG_PCIE3 /* PCIE controller 3 */ + +#ifdef CONFIG_PCI +#define CONFIG_PCI_SCAN_SHOW +#define CONFIG_CMD_PCI +#endif + /* Command line configuration */ #ifndef SPL_NO_ENV #define CONFIG_CMD_ENV -- cgit From e9420444f64a0ec3b444204ada20c10a50f93800 Mon Sep 17 00:00:00 2001 From: Suresh Gupta Date: Tue, 25 Apr 2017 14:51:37 +0530 Subject: armv8: layperscape: remove CONFIG_SPI_FLASH_BAR from some platforms ls1012ardb, ls1046ardb, ls2080ardb have S25FS512S flash which does not support Bank Address Register commands. Signed-off-by: Suresh Gupta Reviewed-by: York Sun --- include/configs/ls1012a_common.h | 1 - include/configs/ls1046ardb.h | 1 - include/configs/ls2080ardb.h | 1 - 3 files changed, 3 deletions(-) (limited to 'include/configs') diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 09f890d55c..0db926fc4a 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -55,7 +55,6 @@ #define CONFIG_FSL_QSPI #define QSPI0_AMBA_BASE 0x40000000 #define CONFIG_SPI_FLASH_SPANSION -#define CONFIG_SPI_FLASH_BAR #define FSL_QSPI_FLASH_SIZE (1 << 24) #define FSL_QSPI_FLASH_NUM 2 diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 67ee62608c..66af039789 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -208,7 +208,6 @@ #define CONFIG_SPI_FLASH_SPANSION #define FSL_QSPI_FLASH_SIZE (1 << 26) #define FSL_QSPI_FLASH_NUM 2 -#define CONFIG_SPI_FLASH_BAR #endif #endif diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index d0bf5520b7..ec83eb5fd5 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -265,7 +265,6 @@ unsigned long get_board_sys_clk(void); /* SPI */ #ifdef CONFIG_FSL_DSPI #define CONFIG_SPI_FLASH -#define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_STMICRO #endif -- cgit From 5e3f763a4b00b6ca99e3e7e30544c78a8cb05f20 Mon Sep 17 00:00:00 2001 From: Suresh Gupta Date: Tue, 25 Apr 2017 14:51:38 +0530 Subject: armv8: ls1012a: fix the size of flash for multiple boards LS1012AFRDM, LS1012ARDB, LS1012AQDS all have S25FS512S flash of 64MB size. Signed-off-by: Suresh Gupta --- include/configs/ls1012a_common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/configs') diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h index 0db926fc4a..861cbc3299 100644 --- a/include/configs/ls1012a_common.h +++ b/include/configs/ls1012a_common.h @@ -56,7 +56,7 @@ #define QSPI0_AMBA_BASE 0x40000000 #define CONFIG_SPI_FLASH_SPANSION -#define FSL_QSPI_FLASH_SIZE (1 << 24) +#define FSL_QSPI_FLASH_SIZE SZ_64M #define FSL_QSPI_FLASH_NUM 2 /* -- cgit From 99b47c25d0e2bdc9ebbd685a87456e175581c695 Mon Sep 17 00:00:00 2001 From: York Sun Date: Tue, 25 Apr 2017 08:39:51 -0700 Subject: armv8: ls1046ardb: Make NET independent of FMan This allows using PCIe NIC without enabling DPAA FMan. Signed-off-by: York Sun CC: Mingkai Hu Acked-by: Mingkai Hu --- include/configs/ls1046ardb.h | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) (limited to 'include/configs') diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 66af039789..7161ee8dd4 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -178,18 +178,20 @@ #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ #endif +#define AQR105_IRQ_MASK 0x80000000 /* FMan */ #ifndef SPL_NO_FMAN -#ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_FMAN_ENET + +#ifdef CONFIG_NET #define CONFIG_PHYLIB -#define CONFIG_PHYLIB_10G #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ - #define CONFIG_PHY_REALTEK -#define CONFIG_PHY_AQUANTIA -#define AQR105_IRQ_MASK 0x80000000 +#endif +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHY_AQUANTIA +#define CONFIG_PHYLIB_10G #define RGMII_PHY1_ADDR 0x1 #define RGMII_PHY2_ADDR 0x2 @@ -200,6 +202,7 @@ #define CONFIG_ETHPRIME "FM1@DTSEC3" #endif + #endif /* QSPI device */ -- cgit From c40e6f916982bfaa38aef642461cbcb5917f2744 Mon Sep 17 00:00:00 2001 From: York Sun Date: Tue, 25 Apr 2017 08:39:52 -0700 Subject: armv8: ls1043ardb: Make NET independent of FMan This allows using PCIe NIC without enabling DPAA FMan. Signed-off-by: York Sun CC: Mingkai Hu Acked-by: Mingkai Hu --- include/configs/ls1043ardb.h | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) (limited to 'include/configs') diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 5e570cd5e8..5e5d1f647c 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -250,16 +250,19 @@ /* FMan */ #ifndef SPL_NO_FMAN -#ifdef CONFIG_SYS_DPAA_FMAN -#define CONFIG_FMAN_ENET +#define AQR105_IRQ_MASK 0x40000000 + +#ifdef CONFIG_NET #define CONFIG_PHYLIB -#define CONFIG_PHYLIB_10G #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ - #define CONFIG_PHY_VITESSE #define CONFIG_PHY_REALTEK +#endif + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G #define CONFIG_PHY_AQUANTIA -#define AQR105_IRQ_MASK 0x40000000 #define RGMII_PHY1_ADDR 0x1 #define RGMII_PHY2_ADDR 0x2 -- cgit From 89a168f776cbc15a2ff1f25a0f4e54f9bbaffdec Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Fri, 28 Apr 2017 10:41:35 +0530 Subject: armv8: ls2080ardb: Add QSPI-boot support QSPI-boot is supported on LS2088ARDB RevF board with LS2088A SoC. LS2088ARDB RevF Board has limitation that QIXIS can not be accessed. CONFIG_FSL_QIXIS is not enabled. Signed-off-by: Priyanka Jain Signed-off-by: Suresh Gupta Reviewed-by: York Sun --- include/configs/ls2080a_common.h | 7 ++++++ include/configs/ls2080aqds.h | 9 ++------ include/configs/ls2080ardb.h | 50 +++++++++++++++++++++++++++++++++++++--- 3 files changed, 56 insertions(+), 10 deletions(-) (limited to 'include/configs') diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 427f623e8c..363bfd4e95 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright (C) 2014 Freescale Semiconductor * * SPDX-License-Identifier: GPL-2.0+ @@ -28,6 +29,12 @@ #else #define CONFIG_SYS_TEXT_BASE 0x30100000 #endif +#else +#define CONFIG_SYS_TEXT_BASE 0x20100000 +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 #endif #define CONFIG_SUPPORT_RAW_INITRD diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index f50ad42917..469ef9e0a4 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright 2015 Freescale Semiconductor * * SPDX-License-Identifier: GPL-2.0+ @@ -262,13 +263,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NAND_FTIM2 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 -#if defined(CONFIG_QSPI_BOOT) -#define CONFIG_SYS_TEXT_BASE 0x20010000 -#define CONFIG_ENV_IS_IN_SPI_FLASH -#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ -#define CONFIG_ENV_SECT_SIZE 0x10000 -#else +#ifndef CONFIG_QSPI_BOOT #define CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) #define CONFIG_ENV_SECT_SIZE 0x20000 diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index ec83eb5fd5..ef95358ebf 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -1,4 +1,5 @@ /* + * Copyright 2017 NXP * Copyright 2015 Freescale Semiconductor * * SPDX-License-Identifier: GPL-2.0+ @@ -12,6 +13,11 @@ #undef CONFIG_CONS_INDEX #define CONFIG_CONS_INDEX 2 +#ifdef CONFIG_FSL_QSPI +#define CONFIG_SYS_I2C_EARLY_INIT +#define CONFIG_DISPLAY_BOARDINFO_LATE +#endif + #define I2C_MUX_CH_VOL_MONITOR 0xa #define I2C_VOL_MONITOR_ADDR 0x38 #define CONFIG_VOL_MONITOR_IR36021_READ @@ -69,6 +75,7 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ CONFIG_SYS_SCSI_MAX_LUN) +#ifndef CONFIG_FSL_QSPI /* undefined CONFIG_FSL_DDR_SYNC_REFRESH for simulator */ #define CONFIG_SYS_NOR0_CSPR_EXT (0x0) @@ -157,7 +164,6 @@ unsigned long get_board_sys_clk(void); #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) - #define CONFIG_FSL_QIXIS /* use common QIXIS code */ #define QIXIS_LBMAP_SWITCH 0x06 #define QIXIS_LBMAP_MASK 0x0f @@ -250,7 +256,7 @@ unsigned long get_board_sys_clk(void); /* Debug Server firmware */ #define CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR #define CONFIG_SYS_DEBUG_SERVER_FW_ADDR 0x580D00000ULL - +#endif #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 /* @@ -263,10 +269,17 @@ unsigned long get_board_sys_clk(void); #define I2C_MUX_CH_DEFAULT 0x8 /* SPI */ -#ifdef CONFIG_FSL_DSPI +#if defined(CONFIG_FSL_QSPI) || defined(CONFIG_FSL_DSPI) #define CONFIG_SPI_FLASH +#ifdef CONFIG_FSL_QSPI #define CONFIG_SPI_FLASH_STMICRO #endif +#ifdef CONFIG_FSL_QSPI +#define CONFIG_SPI_FLASH_SPANSION +#define FSL_QSPI_FLASH_SIZE SZ_64M /* 64MB */ +#define FSL_QSPI_FLASH_NUM 2 +#endif +#endif /* * RTC configuration @@ -345,6 +358,25 @@ unsigned long get_board_sys_clk(void); " 0x580800000 \0" \ BOOTENV #else +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "scriptaddr=0x80800000\0" \ + "kernel_addr_r=0x81000000\0" \ + "pxefile_addr_r=0x81000000\0" \ + "fdt_addr_r=0x88000000\0" \ + "ramdisk_addr_r=0x89000000\0" \ + "loadaddr=0x80100000\0" \ + "kernel_addr=0x100000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xa0000000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0x21000000\0" \ + "mcmemsize=0x40000000\0" \ + "mcinitcmd=fsl_mc start mc 0x20a00000" \ + " 0x20e00000 \0" \ + BOOTENV +#else #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ "scriptaddr=0x80800000\0" \ @@ -367,6 +399,7 @@ unsigned long get_board_sys_clk(void); " 0x580800000 \0" \ BOOTENV #endif +#endif #undef CONFIG_BOOTARGS @@ -376,11 +409,18 @@ unsigned long get_board_sys_clk(void); " hugepagesz=2m hugepages=256" #undef CONFIG_BOOTCOMMAND +#ifdef CONFIG_QSPI_BOOT +/* Try to boot an on-QSPI kernel first, then do normal distro boot */ +#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x20d00000" \ + " && bootm $kernel_start" \ + " || run distro_bootcmd" +#else /* Try to boot an on-NOR kernel first, then do normal distro boot */ #define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000" \ " && cp.b $kernel_start $kernel_load $kernel_size" \ " && bootm $kernel_load" \ " || run distro_bootcmd" +#endif /* MAC/PHY configuration */ #ifdef CONFIG_FSL_MC_ENET @@ -389,7 +429,11 @@ unsigned long get_board_sys_clk(void); #define CONFIG_PHY_CORTINA #define CONFIG_PHYLIB #define CONFIG_SYS_CORTINA_FW_IN_NOR +#ifdef CONFIG_QSPI_BOOT +#define CONFIG_CORTINA_FW_ADDR 0x20980000 +#else #define CONFIG_CORTINA_FW_ADDR 0x581000000 +#endif #define CONFIG_CORTINA_FW_LENGTH 0x40000 #define CORTINA_PHY_ADDR1 0x10 -- cgit From 3049a583f343a71ead9d7cb33f0ab6cecfbbaa12 Mon Sep 17 00:00:00 2001 From: Priyanka Jain Date: Thu, 27 Apr 2017 15:08:07 +0530 Subject: armv8: ls2080ardb: Add LS2081ARDB board support LS2081ARDB board is similar to LS2080ARDB board with few differences It hosts LS2081A SoC Default boot source is QSPI-boot It does not have IFC interface RTC and QSPI flash device are different It provides QIXIS access via I2C Signed-off-by: Priyanka Jain Signed-off-by: Santan Kumar Reviewed-by: York Sun --- include/configs/ls2080ardb.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'include/configs') diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index ef95358ebf..3774b177fc 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -14,6 +14,9 @@ #define CONFIG_CONS_INDEX 2 #ifdef CONFIG_FSL_QSPI +#ifdef CONFIG_TARGET_LS2081ARDB +#define CONFIG_QIXIS_I2C_ACCESS +#endif #define CONFIG_SYS_I2C_EARLY_INIT #define CONFIG_DISPLAY_BOARDINFO_LATE #endif @@ -259,9 +262,28 @@ unsigned long get_board_sys_clk(void); #endif #define CONFIG_SYS_LS_MC_BOOT_TIMEOUT_MS 5000 +#ifdef CONFIG_TARGET_LS2081ARDB +#define CONFIG_FSL_QIXIS /* use common QIXIS code */ +#define QIXIS_QMAP_MASK 0x07 +#define QIXIS_QMAP_SHIFT 5 +#define QIXIS_LBMAP_DFLTBANK 0x00 +#define QIXIS_LBMAP_QSPI 0x00 +#define QIXIS_RCW_SRC_QSPI 0x62 +#define QIXIS_LBMAP_ALTBANK 0x20 +#define QIXIS_RST_CTL_RESET 0x31 +#define QIXIS_RCFG_CTL_RECONFIG_IDLE 0x20 +#define QIXIS_RCFG_CTL_RECONFIG_START 0x21 +#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE 0x08 +#define QIXIS_LBMAP_MASK 0x0f +#define QIXIS_RST_CTL_RESET_EN 0x30 +#endif + /* * I2C */ +#ifdef CONFIG_TARGET_LS2081ARDB +#define CONFIG_SYS_I2C_FPGA_ADDR 0x66 +#endif #define I2C_MUX_PCA_ADDR 0x75 #define I2C_MUX_PCA_ADDR_PRI 0x75 /* Primary Mux*/ @@ -275,7 +297,11 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SPI_FLASH_STMICRO #endif #ifdef CONFIG_FSL_QSPI +#ifdef CONFIG_TARGET_LS2081ARDB +#define CONFIG_SPI_FLASH_STMICRO +#else #define CONFIG_SPI_FLASH_SPANSION +#endif #define FSL_QSPI_FLASH_SIZE SZ_64M /* 64MB */ #define FSL_QSPI_FLASH_NUM 2 #endif @@ -285,8 +311,13 @@ unsigned long get_board_sys_clk(void); * RTC configuration */ #define RTC +#ifdef CONFIG_TARGET_LS2081ARDB +#define CONFIG_RTC_PCF8563 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 +#else #define CONFIG_RTC_DS3231 1 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#endif /* EEPROM */ #define CONFIG_ID_EEPROM -- cgit From 615bfce5640c1b577f14d95d77f1b46dfd2b500e Mon Sep 17 00:00:00 2001 From: Alison Wang Date: Tue, 16 May 2017 10:45:57 +0800 Subject: arm: ls1021a: Adjust memory mapping for Flash/SD card on LS1021AQDS/TWR This patch is to adjust the memory mapping for FLash/SD card on LS1021AQDS and LS1021ATWR, such as U-Boot start address on serial Flash, QE firmware load address and environment address. Signed-off-by: Alison Wang Reviewed-by: York Sun --- include/configs/ls1021aqds.h | 10 +++++----- include/configs/ls1021atwr.h | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'include/configs') diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 373de40d29..5fcaf857fb 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -69,7 +69,7 @@ unsigned long get_board_ddr_clk(void); #endif #ifdef CONFIG_QSPI_BOOT -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #endif #ifdef CONFIG_NAND_BOOT @@ -498,7 +498,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_FSL_DEVICE_DISABLE -#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 +#define CONFIG_SYS_QE_FW_ADDR 0x60940000 #ifdef CONFIG_LPUART #define CONFIG_EXTRA_ENV_SETTINGS \ @@ -549,14 +549,14 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #elif defined(CONFIG_NAND_BOOT) #define CONFIG_ENV_IS_IN_NAND @@ -564,7 +564,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SIZE 0x2000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 1ff3d9ee9e..2a20dec9ab 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -133,7 +133,7 @@ #endif #ifdef CONFIG_QSPI_BOOT -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #endif #ifndef CONFIG_SYS_TEXT_BASE @@ -409,7 +409,7 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif -#define CONFIG_SYS_QE_FW_ADDR 0x600c0000 +#define CONFIG_SYS_QE_FW_ADDR 0x60940000 /* * Environment @@ -417,18 +417,18 @@ #define CONFIG_ENV_OVERWRITE #if defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x20000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET 0x100000 +#define CONFIG_ENV_OFFSET 0x300000 #define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SIZE 0x20000 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif -- cgit From a9a5cef391ed5b2e47ed02a8cecf0ab1a19fc76a Mon Sep 17 00:00:00 2001 From: Alison Wang Date: Tue, 16 May 2017 10:45:58 +0800 Subject: armv8: layerscape: Adjust memory mapping for Flash/SD card on LS1043A This patch is to adjust the memory mapping for FLash/SD card on LS1043AQDS and LS1043ARDB, such as PPA firmware load address, FMAN firmware load address, QE firmware load address, U-Boot start address on serial flash and environment address. Signed-off-by: Alison Wang Reviewed-by: York Sun --- include/configs/ls1043a_common.h | 12 ++++++------ include/configs/ls1043aqds.h | 10 +++++----- include/configs/ls1043ardb.h | 8 ++++---- 3 files changed, 15 insertions(+), 15 deletions(-) (limited to 'include/configs') diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h index e26924877d..05419fe9fb 100644 --- a/include/configs/ls1043a_common.h +++ b/include/configs/ls1043a_common.h @@ -208,20 +208,20 @@ #define CONFIG_SYS_FM_MURAM_SIZE 0x60000 #ifdef CONFIG_NAND_BOOT -/* Store Fman ucode at offeset 0x160000(11 blocks). */ +/* Store Fman ucode at offeset 0x900000(72 blocks). */ #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (72 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SD_BOOT) /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is * about 1MB (2040 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 2080(0x820). + * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 18432(0x4800). */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800) #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_FMAN_FW_ADDR 0x400d0000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000 #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 #define CONFIG_ENV_SPI_MAX_HZ 1000000 @@ -229,7 +229,7 @@ #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR /* FMan fireware Pre-load address */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h index b14e944897..04d74acdeb 100644 --- a/include/configs/ls1043aqds.h +++ b/include/configs/ls1043aqds.h @@ -12,7 +12,7 @@ #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT) #define CONFIG_SYS_TEXT_BASE 0x82000000 #elif defined(CONFIG_QSPI_BOOT) -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #else #define CONFIG_SYS_TEXT_BASE 0x60100000 #endif @@ -413,20 +413,20 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_NAND_BOOT #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (24 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 #endif diff --git a/include/configs/ls1043ardb.h b/include/configs/ls1043ardb.h index 5e5d1f647c..2647b150b4 100644 --- a/include/configs/ls1043ardb.h +++ b/include/configs/ls1043ardb.h @@ -235,15 +235,15 @@ #if defined(CONFIG_NAND_BOOT) #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (24 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 #endif @@ -284,7 +284,7 @@ !defined(CONFIG_QSPI_BOOT) #define CONFIG_U_QE #endif -#define CONFIG_SYS_QE_FW_ADDR 0x60600000 +#define CONFIG_SYS_QE_FW_ADDR 0x60940000 #endif /* USB */ -- cgit From 8104deb2d6b77d3793a66016bf993bccd8f6afe2 Mon Sep 17 00:00:00 2001 From: Alison Wang Date: Tue, 16 May 2017 10:45:59 +0800 Subject: armv8: layerscape: Adjust memory mapping for Flash/SD card on LS1046A This patch is to adjust the memory mapping for FLash/SD card on LS1046AQDS and LS1046ARDB, such as FMAN firmware load address, U-Boot start address on serial flash and environment address. Signed-off-by: Alison Wang Reviewed-by: York Sun --- include/configs/ls1046a_common.h | 10 +++++----- include/configs/ls1046aqds.h | 10 +++++----- include/configs/ls1046ardb.h | 4 ++-- 3 files changed, 12 insertions(+), 12 deletions(-) (limited to 'include/configs') diff --git a/include/configs/ls1046a_common.h b/include/configs/ls1046a_common.h index 80f8dc2cbb..47a544c90c 100644 --- a/include/configs/ls1046a_common.h +++ b/include/configs/ls1046a_common.h @@ -176,23 +176,23 @@ /* * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is * about 1MB (2048 blocks), Env is stored after the image, and the env size is - * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). + * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 18432(0x4800). */ #define CONFIG_SYS_QE_FMAN_FW_IN_MMC -#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x4800) #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_SYS_QE_FW_IN_SPIFLASH -#define CONFIG_SYS_FMAN_FW_ADDR 0x40300000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x40900000 #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_CS 0 #define CONFIG_ENV_SPI_MAX_HZ 1000000 #define CONFIG_ENV_SPI_MODE 0x03 #elif defined(CONFIG_NAND_BOOT) #define CONFIG_SYS_QE_FMAN_FW_IN_NAND -#define CONFIG_SYS_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_SYS_FMAN_FW_ADDR (72 * CONFIG_SYS_NAND_BLOCK_SIZE) #else #define CONFIG_SYS_QE_FMAN_FW_IN_NOR -#define CONFIG_SYS_FMAN_FW_ADDR 0x60300000 +#define CONFIG_SYS_FMAN_FW_ADDR 0x60900000 #endif #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) diff --git a/include/configs/ls1046aqds.h b/include/configs/ls1046aqds.h index 0cf6010a6c..5d2e819e78 100644 --- a/include/configs/ls1046aqds.h +++ b/include/configs/ls1046aqds.h @@ -12,7 +12,7 @@ #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT) #define CONFIG_SYS_TEXT_BASE 0x82000000 #elif defined(CONFIG_QSPI_BOOT) -#define CONFIG_SYS_TEXT_BASE 0x40010000 +#define CONFIG_SYS_TEXT_BASE 0x40100000 #else #define CONFIG_SYS_TEXT_BASE 0x60100000 #endif @@ -447,20 +447,20 @@ unsigned long get_board_ddr_clk(void); #ifdef CONFIG_NAND_BOOT #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) +#define CONFIG_ENV_OFFSET (24 * CONFIG_SYS_NAND_BLOCK_SIZE) #elif defined(CONFIG_SD_BOOT) -#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_ENV_SIZE 0x2000 #elif defined(CONFIG_QSPI_BOOT) #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x10000 #else #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x20000 #endif diff --git a/include/configs/ls1046ardb.h b/include/configs/ls1046ardb.h index 7161ee8dd4..6f649a6223 100644 --- a/include/configs/ls1046ardb.h +++ b/include/configs/ls1046ardb.h @@ -169,12 +169,12 @@ #if defined(CONFIG_SD_BOOT) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 -#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_OFFSET (3 * 1024 * 1024) #define CONFIG_ENV_SIZE 0x2000 #else #define CONFIG_ENV_IS_IN_SPI_FLASH #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ -#define CONFIG_ENV_OFFSET 0x200000 /* 2MB */ +#define CONFIG_ENV_OFFSET 0x300000 /* 3MB */ #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */ #endif -- cgit From f5bf23d8278b2fdfb9ce41fa36369cebc882ab02 Mon Sep 17 00:00:00 2001 From: Santan Kumar Date: Fri, 28 Apr 2017 12:47:24 +0530 Subject: armv8: ls2080ardb, ls2080aqds: Adjust memory map for NOR-boot This patch adjusts memory map for images on LS2080ARDB and LS2080AQDS NOR flash as below Image Flash Offset RCW+PBI 0x00000000 Boot firmware (U-Boot) 0x00100000 Boot firmware Environment 0x00300000 PPA firmware 0x00400000 PHY firmware 0x00980000 DPAA2 MC 0x00A00000 DPAA2 DPL 0x00D00000 DPAA2 DPC 0x00E00000 Kernel.itb 0x01000000 Signed-off-by: Santan Kumar Signed-off-by: Priyanka Jain Reviewed-by: York Sun --- include/configs/ls2080a_common.h | 8 ++++---- include/configs/ls2080aqds.h | 8 ++++---- include/configs/ls2080ardb.h | 12 ++++++------ 3 files changed, 14 insertions(+), 14 deletions(-) (limited to 'include/configs') diff --git a/include/configs/ls2080a_common.h b/include/configs/ls2080a_common.h index 363bfd4e95..7b73139879 100644 --- a/include/configs/ls2080a_common.h +++ b/include/configs/ls2080a_common.h @@ -193,18 +193,18 @@ unsigned long long get_qixis_addr(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581200000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "console=ttyAMA0,38400n8\0" \ - "mcinitcmd=fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" + "mcinitcmd=fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" #define CONFIG_BOOTARGS "console=ttyS0,115200 root=/dev/ram0 " \ "earlycon=uart8250,mmio,0x21c0500 " \ "ramdisk_size=0x2000000 default_hugepagesz=2m" \ " hugepagesz=2m hugepages=256" -#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \ +#define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580d00000 &&" \ " cp.b $kernel_start $kernel_load" \ " $kernel_size && bootm $kernel_load" diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 469ef9e0a4..4788c15d32 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -265,7 +265,7 @@ unsigned long get_board_ddr_clk(void); #ifndef CONFIG_QSPI_BOOT #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x2000 #endif @@ -376,12 +376,12 @@ unsigned long get_board_ddr_clk(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581100000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "mcmemsize=0x40000000\0" \ - "mcinitcmd=fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" + "mcinitcmd=fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" #endif /* CONFIG_SECURE_BOOT */ diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 3774b177fc..0e920f6374 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -251,7 +251,7 @@ unsigned long get_board_sys_clk(void); #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NAND_FTIM3 #define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x200000) +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x300000) #define CONFIG_ENV_SECT_SIZE 0x20000 #define CONFIG_ENV_SIZE 0x2000 #endif @@ -421,13 +421,13 @@ unsigned long get_board_sys_clk(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581100000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "mcmemsize=0x40000000\0" \ "fdtfile=fsl-ls2080a-rdb.dtb\0" \ - "mcinitcmd=fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" \ + "mcinitcmd=fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" \ BOOTENV #endif #endif @@ -447,7 +447,7 @@ unsigned long get_board_sys_clk(void); " || run distro_bootcmd" #else /* Try to boot an on-NOR kernel first, then do normal distro boot */ -#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580700000" \ +#define CONFIG_BOOTCOMMAND "run mcinitcmd && fsl_mc lazyapply dpl 0x580d00000" \ " && cp.b $kernel_start $kernel_load $kernel_size" \ " && bootm $kernel_load" \ " || run distro_bootcmd" @@ -463,7 +463,7 @@ unsigned long get_board_sys_clk(void); #ifdef CONFIG_QSPI_BOOT #define CONFIG_CORTINA_FW_ADDR 0x20980000 #else -#define CONFIG_CORTINA_FW_ADDR 0x581000000 +#define CONFIG_CORTINA_FW_ADDR 0x580980000 #endif #define CONFIG_CORTINA_FW_LENGTH 0x40000 -- cgit From 7676074ac756ab9566d52544cc836f7b93f80b37 Mon Sep 17 00:00:00 2001 From: Udit Agarwal Date: Tue, 2 May 2017 17:43:57 +0530 Subject: armv8: LS2080A: Adjust memory map for secure boot headers for NOR-boot This patch adjusts memory map for secure boot headers on LS2080AQDS and LS2080ARDB platforms. Secure boot headers are placed on NOR flash at offset 0x00600000. Signed-off-by: Udit Agarwal Reviewed-by: York Sun --- include/configs/ls2080aqds.h | 10 +++++----- include/configs/ls2080ardb.h | 10 +++++----- 2 files changed, 10 insertions(+), 10 deletions(-) (limited to 'include/configs') diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h index 4788c15d32..84e9db2648 100644 --- a/include/configs/ls2080aqds.h +++ b/include/configs/ls2080aqds.h @@ -359,14 +359,14 @@ unsigned long get_board_ddr_clk(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581100000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "mcmemsize=0x40000000\0" \ - "mcinitcmd=esbc_validate 0x580c80000;" \ - "esbc_validate 0x580cc0000;" \ - "fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" + "mcinitcmd=esbc_validate 0x580700000;" \ + "esbc_validate 0x580740000;" \ + "fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" #else #define CONFIG_EXTRA_ENV_SETTINGS \ "hwconfig=fsl_ddr:bank_intlv=auto\0" \ diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h index 0e920f6374..c20a7f437c 100644 --- a/include/configs/ls2080ardb.h +++ b/include/configs/ls2080ardb.h @@ -378,15 +378,15 @@ unsigned long get_board_sys_clk(void); "ramdisk_size=0x2000000\0" \ "fdt_high=0xa0000000\0" \ "initrd_high=0xffffffffffffffff\0" \ - "kernel_start=0x581100000\0" \ + "kernel_start=0x581000000\0" \ "kernel_load=0xa0000000\0" \ "kernel_size=0x2800000\0" \ "mcmemsize=0x40000000\0" \ "fdtfile=fsl-ls2080a-rdb.dtb\0" \ - "mcinitcmd=esbc_validate 0x580c80000;" \ - "esbc_validate 0x580cc0000;" \ - "fsl_mc start mc 0x580300000" \ - " 0x580800000 \0" \ + "mcinitcmd=esbc_validate 0x580700000;" \ + "esbc_validate 0x580740000;" \ + "fsl_mc start mc 0x580a00000" \ + " 0x580e00000 \0" \ BOOTENV #else #ifdef CONFIG_QSPI_BOOT -- cgit