From 8c65a2fae89ec10f30acdf5bbf42f799f86c3f3d Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 15 Jun 2015 14:57:15 +0200 Subject: siemens,am33x,thuban: rename dxr2 to thuban Update new naming scheme. Signed-off-by: Samuel Egli Acked-by: Heiko Schocher Reviewed-by: Tom Rini --- include/configs/dxr2.h | 112 ----------------------------------------------- include/configs/thuban.h | 106 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 106 insertions(+), 112 deletions(-) delete mode 100644 include/configs/dxr2.h create mode 100644 include/configs/thuban.h (limited to 'include/configs') diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h deleted file mode 100644 index fa74070d9f..0000000000 --- a/include/configs/dxr2.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * (C) Copyright 2013 Siemens Schweiz AG - * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * Based on: - * U-Boot file:/include/configs/am335x_evm.h - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_DXR2_H -#define __CONFIG_DXR2_H - -#define CONFIG_SIEMENS_DXR2 -#define MACH_TYPE_DXR2 4315 -#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_DXR2 - -#include "siemens-am33x-common.h" - -#define CONFIG_DISPLAY_CPUINFO -#define CONFIG_SYS_MPUCLK 300 -#define DDR_PLL_FREQ 303 -#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC - -#define BOARD_DFU_BUTTON_GPIO 27 -#define BOARD_DFU_BUTTON_LED 64 /* red LED */ -#define BOARD_STATUS_LED 103 /* green LED */ -#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ - -#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ - "button_dfu0=27\0" \ - "led0=103,1,0\0" \ - "led1=64,0,1\0" - -#undef CONFIG_DOS_PARTITION -#undef CONFIG_CMD_FAT - -#define CONFIG_BOARD_LATE_INIT - - /* Physical Memory Map */ -#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ - -/* I2C Configuration */ -#define CONFIG_SYS_I2C_SPEED 100000 - -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define EEPROM_ADDR_DDR3 0x90 -#define EEPROM_ADDR_CHIP 0x120 - -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 - -#undef CONFIG_SPL_NET_SUPPORT -#undef CONFIG_SPL_NET_VCI_STRING -#undef CONFIG_SPL_ETH_SUPPORT - -#undef CONFIG_MII -#undef CONFIG_PHY_GIGE -#define CONFIG_PHY_SMSC - -#define CONFIG_FACTORYSET - -/* Watchdog */ -#define CONFIG_OMAP_WATCHDOG - -/* Define own nand partitions */ -#define CONFIG_ENV_OFFSET_REDUND 0x2E0000 -#define CONFIG_ENV_SIZE_REDUND 0x2000 -#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) - - -#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2 - -#ifndef CONFIG_SPL_BUILD - -/* Default env settings */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "hostname=dxr2\0" \ - "nand_img_size=0x400000\0" \ - "optargs=\0" \ - "preboot=draco_led 0\0" \ - CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ - CONFIG_ENV_SETTINGS_V2 \ - CONFIG_ENV_SETTINGS_NAND_V2 - -#ifndef CONFIG_RESTORE_FLASH -/* set to negative value for no autoboot */ -#define CONFIG_BOOTDELAY 3 - -#define CONFIG_BOOTCOMMAND \ -"if dfubutton; then " \ - "run dfu_start; " \ - "reset; " \ -"fi;" \ -"run nand_boot;" \ -"run nand_boot_backup;" \ -"reset;" - - -#else -#define CONFIG_BOOTDELAY 0 - -#define CONFIG_BOOTCOMMAND \ - "setenv autoload no; " \ - "dhcp; " \ - "if tftp 80000000 debrick.scr; then " \ - "source 80000000; " \ - "fi" -#endif -#endif /* CONFIG_SPL_BUILD */ -#endif /* ! __CONFIG_DXR2_H */ diff --git a/include/configs/thuban.h b/include/configs/thuban.h new file mode 100644 index 0000000000..40244689d9 --- /dev/null +++ b/include/configs/thuban.h @@ -0,0 +1,106 @@ +/* + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_THUBAN_H +#define __CONFIG_THUBAN_H + +#include "siemens-am33x-common.h" + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_SYS_MPUCLK 300 +#define DDR_PLL_FREQ 303 +#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC + +#define BOARD_DFU_BUTTON_GPIO 27 /* Use as default */ +#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ + +#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + "button_dfu0=27\0" \ + "led0=103,1,0\0" \ + "led1=64,0,1\0" + +#undef CONFIG_DOS_PARTITION +#undef CONFIG_CMD_FAT + +#define CONFIG_BOARD_LATE_INIT + + /* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define EEPROM_ADDR_DDR3 0x90 +#define EEPROM_ADDR_CHIP 0x120 + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#undef CONFIG_MII +#undef CONFIG_PHY_GIGE +#define CONFIG_PHY_SMSC + +#define CONFIG_FACTORYSET + +/* Watchdog */ +#define CONFIG_OMAP_WATCHDOG + +/* Define own nand partitions */ +#define CONFIG_ENV_OFFSET_REDUND 0x2E0000 +#define CONFIG_ENV_SIZE_REDUND 0x2000 +#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) + + +#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2 + +#ifndef CONFIG_SPL_BUILD + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hostname=thuban\0" \ + "nand_img_size=0x400000\0" \ + "optargs=\0" \ + "preboot=draco_led 0\0" \ + CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ + CONFIG_ENV_SETTINGS_V2 \ + CONFIG_ENV_SETTINGS_NAND_V2 + +#ifndef CONFIG_RESTORE_FLASH +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTCOMMAND \ +"if dfubutton; then " \ + "run dfu_start; " \ + "reset; " \ +"fi;" \ +"run nand_boot;" \ +"run nand_boot_backup;" \ +"reset;" + + +#else +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif +#endif /* CONFIG_SPL_BUILD */ +#endif /* ! __CONFIG_THUBAN_H */ -- cgit