From 5280f352c8da33b1d7fbf448768717d9e16ff9a1 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Sat, 14 Jul 2007 13:11:28 +0200
Subject: [FIX] support for simply measuring time

---
 include/configs/suzaku.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'include/configs')

diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 8224555896..ca5c7519c6 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -97,4 +97,6 @@
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
+#define XILINX_CLOCK_FREQ	50000000
+
 #endif	/* __CONFIG_H */
-- 
cgit 


From 98889edd50aadf862071eb5664747ad0d568a20e Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Sun, 5 Aug 2007 15:54:53 +0200
Subject: [FIX] Change configuration for XUPV2P Microblaze board

---
 include/configs/xupv2p.h | 57 +++++++++++++++++++++++++++++++++++++++++++-----
 1 file changed, 51 insertions(+), 6 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index b4c720d18b..25fa495641 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -31,13 +31,33 @@
 #define	CONFIG_XUPV2P		1
 
 /* uart */
-#define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
-#define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
+#ifdef XILINX_UARTLITE_BASEADDR
+#define	CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
+#define	CONFIG_BAUDRATE		XILINX_UARTLITE_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
+#else
+#ifdef XILINX_UART16550_BASEADDR
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE	4
+#define CONFIG_CONS_INDEX	1
+#define CFG_NS16550_COM1	XILINX_UART16550_BASEADDR
+#define CFG_NS16550_CLK		XILINX_UART16550_CLOCK_HZ
+
+#define	CONFIG_BAUDRATE		115200
+#define	CFG_BAUDRATE_TABLE	{ 9600, 115200 }
+#endif
+#endif
 
 /* ethernet */
-#define CONFIG_EMAC	1
-#define XPAR_EMAC_0_DEVICE_ID	XPAR_XEMAC_NUM_INSTANCES
+#ifdef XILINX_EMAC_BASEADDR
+#define XILINX_EMAC	1
+#else
+#ifdef XILINX_EMACLITE_BASEADDR
+#define XILINX_EMACLITE	1
+#endif
+#endif
+#undef ET_DEBUG
 
 /*
  * setting reset address
@@ -48,11 +68,13 @@
  * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
  * jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
  */
-#define	CFG_RESET_ADDRESS	0x36000000
+/* #define	CFG_RESET_ADDRESS	0x36000000 */
 
 /* gpio */
+#ifdef XILINX_GPIO_BASEADDR
 #define	CFG_GPIO_0		1
 #define	CFG_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
+#endif
 
 /* interrupt controller */
 #define	CFG_INTC_0		1
@@ -118,6 +140,25 @@
 #define	CFG_ENV_IS_NOWHERE	1
 #define	CFG_ENV_SIZE		0x1000
 #define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
+#ifndef XILINX_SYSACE_BASEADDR
+#define	CONFIG_COMMANDS	(CONFIG__CMD_DFL |\
+			CFG_CMD_MEMORY |\
+			CFG_CMD_IRQ |\
+			CFG_CMD_BDI |\
+			CFG_CMD_NET |\
+			CFG_CMD_IMI |\
+			CFG_CMD_ECHO |\
+			CFG_CMD_CACHE |\
+			CFG_CMD_RUN |\
+			CFG_CMD_AUTOSCRIPT |\
+			CFG_CMD_ASKENV |\
+			CFG_CMD_LOADS |\
+			CFG_CMD_LOADB |\
+			CFG_CMD_MISC |\
+			CFG_CMD_MFSL |\
+			CFG_CMD_PING \
+			)
+#else
 #define	CONFIG_COMMANDS	(CONFIG__CMD_DFL |\
 			CFG_CMD_MEMORY |\
 			CFG_CMD_IRQ |\
@@ -134,8 +175,10 @@
 			CFG_CMD_MISC |\
 			CFG_CMD_FAT |\
 			CFG_CMD_EXT2 |\
+			CFG_CMD_MFSL |\
 			CFG_CMD_PING \
 			)
+#endif
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -150,7 +193,7 @@
 
 #define	CONFIG_BOOTDELAY 	30
 #define	CONFIG_BOOTARGS		"root=romfs"
-#define	CONFIG_HOSTNAME		"ml401"
+#define	CONFIG_HOSTNAME		"xupv2p"
 #define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
 #define	CONFIG_SERVERIP 	192.168.0.5
@@ -166,11 +209,13 @@
 	"echo"
 
 /* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
 #define	CONFIG_SYSTEMACE
 /* #define DEBUG_SYSTEMACE */
 #define	SYSTEMACE_CONFIG_FPGA
 #define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
 #define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
 #define	CONFIG_DOS_PARTITION
+#endif
 
 #endif	/* __CONFIG_H */
-- 
cgit 


From af8377d4eb3a0ac5a831830d5ce63fbf65fecb7f Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Sun, 5 Aug 2007 16:13:31 +0200
Subject: [FIX] Xilinx Uartlite driver Because PPC405 can use UARTLITE serial
 interface and Microblaze can use Uart16550 serial interface not only
 Uartlite.

---
 include/configs/ml401.h  | 1 +
 include/configs/suzaku.h | 1 +
 include/configs/xupv2p.h | 1 +
 3 files changed, 3 insertions(+)

(limited to 'include/configs')

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 3db287784d..a6026528b3 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -32,6 +32,7 @@
 #define	CONFIG_ML401		1	/* ML401 Board */
 
 /* uart */
+#define	XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index ca5c7519c6..9661726b2b 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -48,6 +48,7 @@
 #define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 #define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - (1024 * 1024))
 
+#define XILINX_UARTLITE
 #define CONFIG_BAUDRATE		115200
 #define CFG_BAUDRATE_TABLE	{ 115200 }
 
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index 25fa495641..bac31f476b 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -32,6 +32,7 @@
 
 /* uart */
 #ifdef XILINX_UARTLITE_BASEADDR
+#define	XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UARTLITE_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
-- 
cgit 


From a274ca4f6d68830e7c916f897561cff8c4101c38 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Sun, 5 Aug 2007 22:33:05 +0200
Subject: [FIX] Coding style cleanup

---
 include/configs/ml401.h | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index a6026528b3..8b74b7c686 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -87,7 +87,7 @@
  * 0x11FB_F000	CFG_MONITOR_BASE
  *					MONITOR_CODE	256kB	Env
  * 0x13FF_F000	CFG_GBL_DATA_OFFSET
- * 					GLOBAL_DATA	4kB	bd, gd
+ *					GLOBAL_DATA	4kB	bd, gd
  * 0x1400_0000	CFG_SDRAM_BASE + CFG_SDRAM_SIZE
  */
 
@@ -100,7 +100,7 @@
 /* global pointer */
 #define	CFG_GBL_DATA_SIZE	0x1000	/* size of global data */
 /* start of global data */
-#define	CFG_GBL_DATA_OFFSET     (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define	CFG_GBL_DATA_OFFSET	(CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
 
 /* monitor code */
 #define	SIZE			0x40000
@@ -243,10 +243,10 @@
 #define	CONFIG_BOOTDELAY	30
 #define	CONFIG_BOOTARGS		"root=romfs"
 #define	CONFIG_HOSTNAME		"ml401"
-#define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
+#define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
-#define	CONFIG_SERVERIP 	192.168.0.5
-#define	CONFIG_GATEWAYIP 	192.168.0.1
+#define	CONFIG_SERVERIP		192.168.0.5
+#define	CONFIG_GATEWAYIP	192.168.0.1
 #define	CONFIG_ETHADDR		00:E0:0C:00:00:FD
 
 /* architecture dependent code */
-- 
cgit 


From d1ed28cf36ab6b1d4c479809de7252bf53d2f2d4 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Wed, 15 Aug 2007 21:05:07 +0200
Subject: [FIX] Correction command setting for Microblaze boards

---
 include/configs/ml401.h  | 12 ++----------
 include/configs/suzaku.h | 15 +++++----------
 include/configs/xupv2p.h | 19 ++++++-------------
 3 files changed, 13 insertions(+), 33 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 831929882a..00599391af 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2007 Czech Technical University.
  *
- * Michal SIMEK <monstr@seznam.cz>
+ * Michal SIMEK <monstr@monstr.eu>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -160,21 +160,13 @@
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_BDI
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_FAT
-#define CONFIG_CMD_IMI
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
 #define CONFIG_CMD_MFSL
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
+
 
 #if defined(FLASH)
 	#define CONFIG_CMD_ECHO
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 22c529b690..9a2eec1bb2 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -56,21 +56,16 @@
 #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
 #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
 
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_MEMORY
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_MISC
 
 #define CFG_UART1_BASE		(0xFFFF2000)
 #define CONFIG_SERIAL_BASE	CFG_UART1_BASE
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index b93b3876bc..006a132881 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -155,21 +155,14 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+
 #define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_PING
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MFSL
+#define CONFIG_CMD_PING
 
 #ifdef XILINX_SYSACE_BASEADDR
 #define CONFIG_CMD_EXT2
-- 
cgit 


From 04625764cc93ce8a61625ac19d7fe2a2ceee8143 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Wed, 29 Aug 2007 16:31:18 +0200
Subject: ppc4xx: Change lwmon5 default environment to support Linux RTC

The Linux PCF8563 RTC driver doesn't do autoprobing, so we need
to supply the RTC I2C address as bootline parameter. This patch
adds support for this rtc probing parameter to the bootargs:

"rtc-pcf8563.probe=0,0x51"

Signed-off-by: Stefan Roese <sr@denx.de>
---
 include/configs/lwmon5.h | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index be483245b9..50df848139 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -200,12 +200,13 @@
 		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\
-	"flash_nfs=run nfsargs addip addtty;"				\
+	"addmisc=setenv bootargs ${bootargs} rtc-pcf8563.probe=0,0x51\0"\
+	"flash_nfs=run nfsargs addip addtty addmisc;"			\
 		"bootm ${kernel_addr}\0"				\
-	"flash_self=run ramargs addip addtty;"				\
+	"flash_self=run ramargs addip addtty addmisc;"			\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"     \
-	        "bootm\0"						\
+	"net_nfs=tftp 200000 ${bootfile};"				\
+		"run nfsargs addip addtty addmisc;bootm\0"		\
 	"rootpath=/opt/eldk/ppc_4xxFP\0"				\
 	"bootfile=/tftpboot/lwmon5/uImage\0"				\
 	"kernel_addr=FC000000\0"					\
-- 
cgit 


From c88b6e1cbf9a8ae2a34fb602f78a1bf4e6692b6a Mon Sep 17 00:00:00 2001
From: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Date: Thu, 30 Aug 2007 15:03:04 +0200
Subject: Remove double quotation marks around MAC address for STK1002

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
 include/configs/atstk1002.h | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index e1d8f74c5e..65736644b6 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -103,8 +103,8 @@
  * generated and assigned to the environment variables "ethaddr" and
  * "eth1addr".
  */
-#define CONFIG_ETHADDR			"6a:87:71:14:cd:cb"
-#define CONFIG_ETH1ADDR			"ca:f8:15:e6:3e:e6"
+#define CONFIG_ETHADDR			6a:87:71:14:cd:cb
+#define CONFIG_ETH1ADDR			ca:f8:15:e6:3e:e6
 #define CONFIG_OVERWRITE_ETHADDR_ONCE	1
 #define CONFIG_NET_MULTI		1
 
-- 
cgit 


From 696dd1307cd8e73a10e9bb3c51731bfd6f837bee Mon Sep 17 00:00:00 2001
From: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Date: Thu, 30 Aug 2007 15:03:05 +0200
Subject: Reduce BOOTDELAY variable to 1 second by default for STK1002

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
 include/configs/atstk1002.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 65736644b6..f7bf62c825 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -87,7 +87,7 @@
  * Only interrupt autoboot if <space> is pressed. Otherwise, garbage
  * data on the serial line may interrupt the boot sequence.
  */
-#define CONFIG_BOOTDELAY		2
+#define CONFIG_BOOTDELAY		1
 #define CONFIG_AUTOBOOT			1
 #define CONFIG_AUTOBOOT_KEYED		1
 #define CONFIG_AUTOBOOT_PROMPT				\
-- 
cgit 


From 81b73dec16fd1227369a191e725e10044a9d56b8 Mon Sep 17 00:00:00 2001
From: Gary Jennejohn <garyj@denx.de>
Date: Fri, 31 Aug 2007 15:21:46 +0200
Subject: ppc4xx: (Re-)Enable CONFIG_PCI_PNP on AMCC 440EPx Sequoia

The 440EPx has a problem when the PCI_CACHE_LINE_SIZE register is
set to non-zero, because it doesn't support MRM (memory-read-
multiple) correctly. We now added the possibility to configure
this register in the board config file, so that the default value
of 8 can be overridden.

Here the details of this patch:

o drivers_pci_auto.c: introduce CFG_PCI_CACHE_LINE_SIZE to allow
  board-specific settings. As an example the sequoia board requires 0.
  Idea from Stefan Roese <sr@denx.de>.
o board/amcc/sequoia/init.S: add a TLB mapping at 0xE8000000 for the
  PCI IO-space. Obtained from Stefan Roese <sr@denx.de>.
o include/configs/sequoia.h: turn CONFIG_PCI_PNP back on and set
  CFG_PCI_CACHE_LINE_SIZE to 0.

Signed-off-by: Gary Jennejohn <garyj@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
---
 include/configs/sequoia.h | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index 824a81240c..c2e1386217 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -400,7 +400,8 @@
  *----------------------------------------------------------------------*/
 /* General PCI */
 #define CONFIG_PCI			/* include pci support	        */
-#undef CONFIG_PCI_PNP			/* do (not) pci plug-and-play   */
+#define CONFIG_PCI_PNP			/* do pci plug-and-play   */
+#define CFG_PCI_CACHE_LINE_SIZE	0 /* to avoid problems with PNP */
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup  */
 #define CFG_PCI_TARGBASE        0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE*/
 
-- 
cgit 


From cf2817a84c2e9bea2c5dfc084bce2f2d2563ac43 Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Thu, 6 Sep 2007 09:46:23 -0600
Subject: Migrate 5xxx boards from CONFIG_OF_FLAT_TREE to CONFIG_OF_LIBFDT

Affects boards: icecube (lite5200), jupiter, motionpro, tqm5200

Tested on: lite5200b

Note: the fixup functions have not been moved to a common place.  This
patch is targeted for immediate merging as in solves a build issue, but
the final name/location of the fixups is still subject to debate.  I
propose to merge this now, and move the fixups in the next merge window
to be usable by all targets.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 include/configs/IceCube.h   | 2 +-
 include/configs/TQM5200.h   | 2 +-
 include/configs/jupiter.h   | 2 +-
 include/configs/motionpro.h | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index bdd92bae3c..4c16d22959 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -178,7 +178,7 @@
 #endif /* CONFIG_MPC5200 */
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
 #define OF_CPU			"PowerPC,5200@0"
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index c08173b075..e0c9d81be0 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -701,7 +701,7 @@
  * Open firmware flat tree support
  *-----------------------------------------------------------------------
  */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
 #define OF_CPU			"PowerPC,5200@0"
diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h
index 4070ab971e..b7100e986c 100644
--- a/include/configs/jupiter.h
+++ b/include/configs/jupiter.h
@@ -145,7 +145,7 @@
 
 #if 0
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
 #define OF_CPU			"PowerPC,5200@0"
diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index 82827c692f..9a21632162 100644
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -417,7 +417,7 @@ extern void __led_set(led_id_t id, int state);
 #define CFG_RESET_ADDRESS	0xfff00100
 
 /* pass open firmware flat tree */
-#define CONFIG_OF_FLAT_TREE	1
+#define CONFIG_OF_LIBFDT	1
 #define CONFIG_OF_BOARD_SETUP	1
 
 #define OF_CPU			"PowerPC,5200@0"
-- 
cgit 


From 5e5803e119de3bebd76fc9a57baac0b5aeccc8a3 Mon Sep 17 00:00:00 2001
From: stefano babic <sbabic@denx.de>
Date: Thu, 30 Aug 2007 23:01:49 +0200
Subject: PXA270: Added support for TrizepsIV board.

This patch add support for the Trizeps IV module (520Mhz).

Signed-off-by: Stefano Babic <sbabic@denx.de>
---
 include/configs/trizepsiv.h | 325 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 325 insertions(+)
 create mode 100644 include/configs/trizepsiv.h

(limited to 'include/configs')

diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
new file mode 100644
index 0000000000..84998d4392
--- /dev/null
+++ b/include/configs/trizepsiv.h
@@ -0,0 +1,325 @@
+/*
+ * (C) Copyright 2007
+ * Stefano Babic, DENX Gmbh, sbabic@denx.de
+ *
+ * (C) Copyright 2004
+ * Robert Whaley, Applied Data Systems, Inc. rwhaley@applieddata.net
+ *
+ * (C) Copyright 2002
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * Configuation settings for the LUBBOCK board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_PXA27X		1	/* This is an PXA27x CPU    */
+
+#define LITTLEENDIAN		1	/* used by usb_ohci.c		*/
+
+#define CONFIG_MMC		1
+#define BOARD_LATE_INIT		1
+
+#undef CONFIG_USE_IRQ			/* we don't need IRQ/FIQ stuff */
+
+#define RTC
+
+/*
+ * Size of malloc() pool
+ */
+#define CFG_MALLOC_LEN	    (CFG_ENV_SIZE + 128*1024)
+#define CFG_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_FFUART	       1       /* we use FFUART on Conxs */
+#define CONFIG_BTUART	       1       /* we use BTUART on Conxs */
+#define CONFIG_STUART	       1       /* we use STUART on Conxs */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_BAUDRATE	       38400
+
+#define CONFIG_DOS_PARTITION   1
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IMLS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+#define CONFIG_BOOTDELAY	3
+#define CONFIG_SERVERIP		192.168.1.99
+#define CONFIG_BOOTCOMMAND	"run boot_flash"
+#define CONFIG_BOOTARGS		"console=ttyS0,38400 ramdisk_size=12288"\
+				" rw root=/dev/ram initrd=0xa0800000,5m"
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"program_boot_mmc="						\
+			"mw.b 0xa0010000 0xff 0x20000; "		\
+			"if	 mmcinit && "				\
+				"fatload mmc 0 0xa0010000 u-boot.bin; "	\
+			"then "						\
+				"protect off 0x0 0x1ffff; "		\
+				"erase 0x0 0x1ffff; "			\
+				"cp.b 0xa0010000 0x0 0x20000; "		\
+			"fi\0"						\
+	"program_uzImage_mmc="						\
+			"mw.b 0xa0010000 0xff 0x180000; "		\
+			"if	 mmcinit && "				\
+				"fatload mmc 0 0xa0010000 uzImage; "	\
+			"then "						\
+				"protect off 0x40000 0x1bffff; "	\
+				"erase 0x40000 0x1bffff; "		\
+				"cp.b 0xa0010000 0x40000 0x180000; "	\
+			"fi\0"						\
+	"program_ramdisk_mmc="						\
+			"mw.b 0xa0010000 0xff 0x500000; "		\
+			"if	 mmcinit && "				\
+				"fatload mmc 0 0xa0010000 ramdisk.gz; "	\
+			"then "						\
+				"protect off 0x1c0000 0x6bffff; "	\
+				"erase 0x1c0000 0x6bffff; "		\
+				"cp.b 0xa0010000 0x1c0000 0x500000; "	\
+			"fi\0"						\
+	"boot_mmc="							\
+			"if	 mmcinit && "				\
+				"fatload mmc 0 0xa0030000 uzImage && "	\
+				"fatload mmc 0 0xa0800000 ramdisk.gz; "	\
+			"then "						\
+				"bootm 0xa0030000; "			\
+			"fi\0"						\
+	"boot_flash="							\
+			"cp.b 0x1c0000 0xa0800000 0x500000; "		\
+			"bootm 0x40000\0"				\
+
+#define CONFIG_SETUP_MEMORY_TAGS 1
+#define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
+/* #define CONFIG_INITRD_TAG	 1 */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400		/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_HUSH_PARSER		1
+#define CFG_PROMPT_HUSH_PS2	"> "
+
+#define CFG_LONGHELP				/* undef to save memory		*/
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT		"$ "		/* Monitor Command Prompt */
+#else
+#define CFG_PROMPT		"=> "		/* Monitor Command Prompt */
+#endif
+#define CFG_CBSIZE		256		/* Console I/O Buffer Size	*/
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS		16		/* max number of command args	*/
+#define CFG_BARGSIZE		CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+#define CFG_DEVICE_NULLDEV	1
+
+#define CFG_MEMTEST_START	0xa0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/
+
+#undef	CFG_CLKS_IN_HZ		/* everything, incl board info, in Hz */
+
+#define CFG_LOAD_ADDR		0xa1000000	/* default load address */
+
+#define CFG_HZ			3686400		/* incrementer freq: 3.6864 MHz */
+#define CFG_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
+
+						/* valid baudrates */
+#define CFG_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
+
+#define CFG_MMC_BASE		0xF0000000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE	(128*1024)	/* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ	(4*1024)	/* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ	(4*1024)	/* FIQ stack */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS	4	   /* we have 2 banks of DRAM */
+#define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
+#define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2 */
+#define PHYS_SDRAM_2_SIZE	0x00000000 /* 0 MB */
+#define PHYS_SDRAM_3		0xa8000000 /* SDRAM Bank #3 */
+#define PHYS_SDRAM_3_SIZE	0x00000000 /* 0 MB */
+#define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
+#define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */
+
+#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
+
+#define CFG_DRAM_BASE		0xa0000000
+#define CFG_DRAM_SIZE		0x04000000
+
+#define CFG_FLASH_BASE		PHYS_FLASH_1
+
+/*
+ * GPIO settings
+ */
+#define CFG_GPSR0_VAL		0x00018000
+#define CFG_GPSR1_VAL		0x00000000
+#define CFG_GPSR2_VAL		0x400dc000
+#define CFG_GPSR3_VAL		0x00000000
+#define CFG_GPCR0_VAL		0x00000000
+#define CFG_GPCR1_VAL		0x00000000
+#define CFG_GPCR2_VAL		0x00000000
+#define CFG_GPCR3_VAL		0x00000000
+#define CFG_GPDR0_VAL		0x00018000
+#define CFG_GPDR1_VAL		0x00028801
+#define CFG_GPDR2_VAL		0x520dc000
+#define CFG_GPDR3_VAL		0x0001E000
+#define CFG_GAFR0_L_VAL		0x801c0000
+#define CFG_GAFR0_U_VAL		0x00000013
+#define CFG_GAFR1_L_VAL		0x6990100A
+#define CFG_GAFR1_U_VAL		0x00000008
+#define CFG_GAFR2_L_VAL		0xA0000000
+#define CFG_GAFR2_U_VAL		0x010900F2
+#define CFG_GAFR3_L_VAL		0x54000003
+#define CFG_GAFR3_U_VAL		0x00002401
+#define CFG_GRER0_VAL		0x00000000
+#define CFG_GRER1_VAL		0x00000000
+#define CFG_GRER2_VAL		0x00000000
+#define CFG_GRER3_VAL		0x00000000
+#define CFG_GFER0_VAL		0x00000000
+#define CFG_GFER1_VAL		0x00000000
+#define CFG_GFER2_VAL		0x00000000
+#define CFG_GFER3_VAL		0x00000020
+
+
+#define CFG_PSSR_VAL		0x20	/* CHECK */
+
+/*
+ * Clock settings
+ */
+#define CFG_CKEN		0x01FFFFFF	/* CHECK */
+#define CFG_CCCR		0x02000290 /*   520Mhz */
+
+/*
+ * Memory settings
+ */
+
+#define CFG_MSC0_VAL		0x4df84df0
+#define CFG_MSC1_VAL		0x7ff87ff4
+#define CFG_MSC2_VAL		0xa26936d4
+#define CFG_MDCNFG_VAL		0x880009C9
+#define CFG_MDREFR_VAL		0x20ca201e
+#define CFG_MDMRS_VAL		0x00220022
+
+#define CFG_FLYCNFG_VAL		0x00000000
+#define CFG_SXCNFG_VAL		0x40044004
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+#define CFG_MECR_VAL		0x00000001
+#define CFG_MCMEM0_VAL		0x00004204
+#define CFG_MCMEM1_VAL		0x00010204
+#define CFG_MCATT0_VAL		0x00010504
+#define CFG_MCATT1_VAL		0x00010504
+#define CFG_MCIO0_VAL		0x00008407
+#define CFG_MCIO1_VAL		0x0000c108
+
+#define CONFIG_DRIVER_DM9000		1
+#define CONFIG_DRIVER_DM9000		1
+#define CONFIG_DM9000_BASE	0x08000000
+#define DM9000_IO			CONFIG_DM9000_BASE
+#define DM9000_DATA			(CONFIG_DM9000_BASE+0x8004)
+/* #define CONFIG_DM9000_USE_8BIT */
+/* #define CONFIG_DM9000_USE_16BIT */
+#define CONFIG_DM9000_USE_32BIT
+
+#define CONFIG_USB_OHCI_NEW	1
+#define CFG_USB_OHCI_BOARD_INIT	1
+#define CFG_USB_OHCI_MAX_ROOT_PORTS	3
+#define CFG_USB_OHCI_REGS_BASE	0x4C000000
+#define CFG_USB_OHCI_SLOT_NAME	"trizepsiv"
+#define CONFIG_USB_STORAGE	1
+#define CFG_USB_OHCI_CPU_INIT	1
+
+/*
+ * FLASH and environment organization
+ */
+
+#define CFG_FLASH_CFI
+#define CFG_FLASH_CFI_DRIVER	1
+
+#define CFG_MONITOR_BASE	0
+#define CFG_MONITOR_LEN		0x40000
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	4 + 255  /* max number of sectors on one chip    */
+
+/* timeout values are in ticks */
+#define CFG_FLASH_ERASE_TOUT	(25*CFG_HZ) /* Timeout for Flash Erase */
+#define CFG_FLASH_WRITE_TOUT	(25*CFG_HZ) /* Timeout for Flash Write */
+
+/* write flash less slowly */
+#define CFG_FLASH_USE_BUFFER_WRITE 1
+
+/* Flash environment locations */
+#define CFG_ENV_IS_IN_FLASH	1
+#define CFG_ENV_ADDR		(PHYS_FLASH_1 + CFG_MONITOR_LEN)	/* Addr of Environment Sector	*/
+#define CFG_ENV_SIZE		0x40000	/* Total Size of Environment     	*/
+#define CFG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+#endif	/* __CONFIG_H */
-- 
cgit 


From 7f1913938984ef6c6a46cb53e003719196d9c5de Mon Sep 17 00:00:00 2001
From: Grzegorz Bernacki <gjb@semihalf.com>
Date: Fri, 7 Sep 2007 18:20:23 +0200
Subject: [PPC440SPe] Improve PCIe configuration space access

- correct configuration space mapping
- correct bus numbering
- better access to config space

Prior to this patch, the 440SPe host/PCIe bridge was able to configure only the
first device on the first bus. We now allow to configure up to 16 buses;
also, scanning for devices behind the PCIe-PCIe bridge is supported, so
peripheral devices farther in hierarchy can be identified.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
---
 include/configs/katmai.h | 10 +++++-----
 include/configs/yucca.h  | 10 +++++-----
 2 files changed, 10 insertions(+), 10 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index b6d0f519a8..7834e39084 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -66,11 +66,11 @@
 #define CFG_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
 
 #define CFG_PCIE0_CFGBASE	0xc0000000
-#define CFG_PCIE0_XCFGBASE	0xc0000400
-#define CFG_PCIE1_CFGBASE	0xc0001000
-#define CFG_PCIE1_XCFGBASE	0xc0001400
-#define CFG_PCIE2_CFGBASE	0xc0002000
-#define CFG_PCIE2_XCFGBASE	0xc0002400
+#define CFG_PCIE1_CFGBASE	0xc1000000
+#define CFG_PCIE2_CFGBASE	0xc2000000
+#define CFG_PCIE0_XCFGBASE	0xc3000000
+#define CFG_PCIE1_XCFGBASE	0xc3001000
+#define CFG_PCIE2_XCFGBASE	0xc3002000
 
 /* System RAM mapped to PCI space */
 #define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 906f046fa7..323535aa9f 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -68,11 +68,11 @@
 #define CFG_PCIE_BASE		0xe0000000	/* PCIe UTL regs */
 
 #define CFG_PCIE0_CFGBASE	0xc0000000
-#define CFG_PCIE0_XCFGBASE	0xc0000400
-#define CFG_PCIE1_CFGBASE	0xc0001000
-#define CFG_PCIE1_XCFGBASE	0xc0001400
-#define CFG_PCIE2_CFGBASE	0xc0002000
-#define CFG_PCIE2_XCFGBASE	0xc0002400
+#define CFG_PCIE1_CFGBASE	0xc1000000
+#define CFG_PCIE2_CFGBASE	0xc2000000
+#define CFG_PCIE0_XCFGBASE	0xc3000000
+#define CFG_PCIE1_XCFGBASE	0xc3001000
+#define CFG_PCIE2_XCFGBASE	0xc3002000
 
 /* System RAM mapped to PCI space */
 #define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE
-- 
cgit 


From 6efc1fc0b63e55f94c5bc61d8dd23c918e3bc778 Mon Sep 17 00:00:00 2001
From: Grzegorz Bernacki <gjb@semihalf.com>
Date: Fri, 7 Sep 2007 18:35:37 +0200
Subject: [PPC440SPe] PCIe environment settings for Katmai and Yucca

- 'pciconfighost' is set by default in order to be able to scan bridges
behind the primary host/PCIe

- 'pciscandelay' env variable is recognized to allow for user-controlled
delay before the PCIe bus enumeration; some peripheral devices require a
significant delay before they can be scanned (e.g. LSI8408E); without the
delay they are not detected

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
---
 include/configs/katmai.h | 3 ++-
 include/configs/yucca.h  | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/katmai.h b/include/configs/katmai.h
index 7834e39084..7908e5a474 100644
--- a/include/configs/katmai.h
+++ b/include/configs/katmai.h
@@ -201,6 +201,7 @@
 		"setenv filesize;saveenv\0"				\
 	"upd=run load;run update\0"					\
 	"kozio=bootm ffc60000\0"					\
+	"pciconfighost=1\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -322,7 +323,7 @@
 #define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
-#undef CONFIG_PCI_CONFIG_HOST_BRIDGE
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 
 /* Board-specific PCI */
 #define CFG_PCI_TARGET_INIT		/* let board init pci target    */
diff --git a/include/configs/yucca.h b/include/configs/yucca.h
index 323535aa9f..74033b4aef 100644
--- a/include/configs/yucca.h
+++ b/include/configs/yucca.h
@@ -182,6 +182,7 @@
 		"cp.b ${fileaddr} FFFB0000 ${filesize};"		\
 		"setenv filesize;saveenv\0"				\
 	"upd=run load;run update\0"					\
+	"pciconfighost=1\0"						\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
@@ -297,7 +298,7 @@
 #define CONFIG_PCI			/* include pci support		*/
 #define CONFIG_PCI_PNP		1	/* do pci plug-and-play		*/
 #define CONFIG_PCI_SCAN_SHOW	1	/* show pci devices on startup	*/
-#undef CONFIG_PCI_CONFIG_HOST_BRIDGE
+#define CONFIG_PCI_CONFIG_HOST_BRIDGE
 
 /* Board-specific PCI */
 #define CFG_PCI_TARGET_INIT		/* let board init pci target    */
-- 
cgit 


From 1d9e31e04911a6bb7cc66dd91132c699101c32e2 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Sun, 9 Sep 2007 21:21:33 +0200
Subject: Fix compile error in spc1920 config.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Signed-off-by: Markus Klotzbücher <mk@denx.de>
Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/configs/spc1920.h | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/spc1920.h b/include/configs/spc1920.h
index b4ab9ad972..2efc8f10ec 100644
--- a/include/configs/spc1920.h
+++ b/include/configs/spc1920.h
@@ -31,14 +31,9 @@
 #undef	CONFIG_8xx_CONS_NONE
 
 #define CONFIG_MII
-/* #define MII_DEBUG */
-/* #define CONFIG_FEC_ENET */
 #undef CONFIG_ETHER_ON_FEC1
 #define CONFIG_ETHER_ON_FEC2
 #define FEC_ENET
-/* #define CONFIG_FEC2_PHY_NORXERR */
-/* #define CFG_DISCOVER_PHY */
-/* #define CONFIG_PHY_ADDR		0x1 */
 #define CONFIG_FEC2_PHY		1
 
 #define CONFIG_BAUDRATE		19200
@@ -100,14 +95,12 @@
 #define CONFIG_CMD_ECHO
 #define CONFIG_CMD_IMMAP
 #define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 
-#undef CONFIG_CMD_NET
-
-
 /*
  * Miscellaneous configurable options
  */
-- 
cgit 


From d45963854eff39d575124d859419bb4953ce2c87 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Tue, 11 Sep 2007 00:37:04 +0200
Subject: [FIX] Microblaze ML401 - repare FLASH handling

---
 include/configs/ml401.h | 26 ++++++++++++++++----------
 1 file changed, 16 insertions(+), 10 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 00599391af..74fe88867e 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -146,6 +146,16 @@
 	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
 #endif /* !FLASH */
 
+/* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
+	#define	CONFIG_SYSTEMACE
+	/* #define DEBUG_SYSTEMACE */
+	#define	SYSTEMACE_CONFIG_FPGA
+	#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
+	#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
+	#define	CONFIG_DOS_PARTITION
+#endif
+
 /*
  * BOOTP options
  */
@@ -161,12 +171,14 @@
 
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_MFSL
 #define CONFIG_CMD_PING
 
+#if defined(CONFIG_SYSTEMACE)
+	#define CONFIG_CMD_EXT2
+	#define CONFIG_CMD_FAT
+#endif
 
 #if defined(FLASH)
 	#define CONFIG_CMD_ECHO
@@ -178,6 +190,8 @@
 		#define CONFIG_CMD_ENV
 		#define CONFIG_CMD_SAVES
 	#endif
+#else
+	#undef CONFIG_CMD_FLASH
 #endif
 
 #if defined(CONFIG_CMD_JFFS2)
@@ -212,14 +226,6 @@
 #define	CFG_USR_EXCEP	/* user exception */
 #define CFG_HZ	1000
 
-/* system ace */
-#define	CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-#define	SYSTEMACE_CONFIG_FPGA
-#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
-#define	CONFIG_DOS_PARTITION
-
 #define	CONFIG_PREBOOT		"echo U-BOOT for ML401;setenv preboot;echo"
 
 #define	CONFIG_EXTRA_ENV_SETTINGS	"unlock=yes\0" /* hardware flash protection */\
-- 
cgit 


From 38ad82da0c1180ecdeb212a8f4245e945bcc546e Mon Sep 17 00:00:00 2001
From: Grzegorz Bernacki <gjb@semihalf.com>
Date: Tue, 11 Sep 2007 15:42:11 +0200
Subject: [GP3SSA] Add define CONFIG_MPC85XX_PCI2 in config file to allow
 u-boot to scan on second pci bus.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
---
 include/configs/stxssa.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index f32ff67d9f..b41dafaf98 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -230,7 +230,7 @@
 #define CFG_PCI2_IO_SIZE	0x01000000	/* 16M */
 
 #if defined(CONFIG_PCI) 		/* PCI Ethernet card */
-
+#define CONFIG_MPC85XX_PCI2	1
 #define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP			/* do pci plug-and-play */
 
-- 
cgit 


From e1f601b572db5de9aa81a0b77c68a86994fe24c4 Mon Sep 17 00:00:00 2001
From: Bartlomiej Sieka <tur@semihalf.com>
Date: Thu, 13 Sep 2007 16:33:59 +0200
Subject: tqm5200: Restore customary env. variable boot commands for powerpc
 kernels

- update default definitions of kernel_addr and fdt_addr env. variables
- make arch/powerpc booting the default scenario
- update MTD partition layout to match the above

Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
---
 include/configs/TQM5200.h | 39 +++++++++++++++++++++++----------------
 1 file changed, 23 insertions(+), 16 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index e0c9d81be0..4e0e1517c5 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -238,13 +238,13 @@
 		"protect on FC000000 +${filesize}\0"
 #endif
 
-#ifndef CONFIG_CAM5200
+#if defined(CONFIG_TQM5200)
 #define CUSTOM_ENV_SETTINGS						\
+	"hostname=tqm5200\0"						\
 	"bootfile=/tftpboot/tqm5200/uImage\0"				\
-	"bootfile_fdt=/tftpboot/tqm5200/uImage_fdt\0"			\
 	"fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0"			\
 	"u-boot=/tftpboot/tqm5200/u-boot.bin\0"
-#else
+#elif defined(CONFIG_CAM5200)
 #define CUSTOM_ENV_SETTINGS						\
 	"bootfile=cam5200/uImage\0"					\
 	"u-boot=cam5200/u-boot.bin\0"					\
@@ -252,11 +252,13 @@
 #endif
 
 #define CONFIG_EXTRA_ENV_SETTINGS					\
-	"console=ttyS0\0"						\
-	"kernel_addr=200000\0"						\
-	"fdt_addr=400000\0"						\
-	"hostname=tqm5200\0"						\
 	"netdev=eth0\0"							\
+	"console=ttyPSC0\0"						\
+	"fdt_addr=FC0A0000\0"						\
+	"kernel_addr=FC0C0000\0"					\
+	"ramdisk_addr=FC300000\0"					\
+	"kernel_addr_r=200000\0"					\
+	"fdt_addr_r=400000\0"						\
 	"rootpath=/opt/eldk/ppc_6xx\0"					\
 	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
@@ -266,16 +268,20 @@
 		":${hostname}:${netdev}:off panic=1\0"			\
 	"addcons=setenv bootargs ${bootargs} "				\
 		"console=${console},${baudrate}\0"			\
-	"flash_self=run ramargs addip addcons;"				\
+	"flash_self_old=sete console ttyS0; run ramargs addip addcons;"	\
 		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
-	"flash_nfs=run nfsargs addip addcons;"				\
+	"flash_self=run ramargs addip addcons;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"	\
+	"flash_nfs_old=sete console ttyS0; run nfsargs addip addcons;"	\
 		"bootm ${kernel_addr}\0"				\
-	"net_nfs=tftp ${kernel_addr} ${bootfile};"			\
-		"run nfsargs addip addcons;bootm\0"			\
-	"net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt};"		\
-		"tftp ${fdt_addr} ${fdt_file};setenv console ttyPSC0;"	\
-		"run nfsargs addip addcons;"				\
+	"flash_nfs=run nfsargs addip addcons;"				\
 		"bootm ${kernel_addr} - ${fdt_addr}\0"			\
+	"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};"		\
+		"sete console ttyS0; run nfsargs addip addcons;bootm\0"	\
+	"net_nfs=tftp ${kernel_addr_r} ${bootfile}; "			\
+		"tftp ${fdt_addr_r} ${fdt_file}; "			\
+		"run nfsargs addip addcons; "				\
+		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
 	CUSTOM_ENV_SETTINGS						\
 	"load=tftp 200000 ${u-boot}\0"					\
 	ENV_UPDT							\
@@ -408,11 +414,12 @@
 #  endif /* CFG_LOWBOOT */
 # else	/* !CONFIG_TQM5200_B */
 #   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:640k(firmware),"	\
-						"1408k(kernel),"	\
+						"128k(dtb),"		\
+						"2304k(kernel),"	\
 						"2m(initrd),"		\
 						"4m(small-fs),"		\
 						"8m(misc),"		\
-						"16m(big-fs)"
+						"15m(big-fs)"
 # endif /* CONFIG_TQM5200_B */
 #elif defined (CONFIG_CAM5200)
 #   define MTDPARTS_DEFAULT	"mtdparts=TQM5200-0:768k(firmware),"	\
-- 
cgit 


From 1218abf1b5817a39a82399b4b928b00750575bda Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Sat, 15 Sep 2007 20:48:41 +0200
Subject: Fix cases where DECLARE_GLOBAL_DATA_PTR was not declared as global

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/configs/atstk1002.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index e1d8f74c5e..75b153e4a8 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -183,10 +183,9 @@
 #define CFG_LONGHELP			1
 
 #define CFG_MEMTEST_START						\
-	({ DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start; })
+	({ gd->bd->bi_dram[0].start; })
 #define CFG_MEMTEST_END							\
 	({								\
-		DECLARE_GLOBAL_DATA_PTR;				\
 		gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;	\
 	})
 #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
-- 
cgit 


From c750d2e6692a000a82f29de7bf24e3dc21239161 Mon Sep 17 00:00:00 2001
From: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Date: Wed, 12 Sep 2007 12:36:53 +0200
Subject: NAND: Add CFG_NAND_QUIET option

This config option sets the default for the progress information
output behavior that can also be configured through the 'quiet'
environment variable.

The legacy NAND code does not print the current progress info
on the console. So this option is for backward compatibility for
units that are in the field and where setting the quiet variable
is not an option. With CFG_NAND_QUIET set to '1' the console
progress info is turned off. This can still be overwritten
through the environment variable.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
---
 include/configs/ASH405.h | 3 ++-
 include/configs/CMS700.h | 3 ++-
 include/configs/HH405.h  | 3 ++-
 include/configs/HUB405.h | 3 ++-
 include/configs/PLU405.h | 3 ++-
 include/configs/VOH405.h | 3 ++-
 6 files changed, 12 insertions(+), 6 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h
index 0718c85745..9adbba9544 100644
--- a/include/configs/ASH405.h
+++ b/include/configs/ASH405.h
@@ -158,7 +158,8 @@
 #define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CFG_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff
diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h
index 1fd2b53974..21cd9c1f26 100644
--- a/include/configs/CMS700.h
+++ b/include/configs/CMS700.h
@@ -165,7 +165,8 @@
 #define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CFG_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff
diff --git a/include/configs/HH405.h b/include/configs/HH405.h
index ea8e61a764..8967b3fc60 100644
--- a/include/configs/HH405.h
+++ b/include/configs/HH405.h
@@ -217,7 +217,8 @@
 #define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CFG_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff
diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h
index ed669c51da..1ff7108130 100644
--- a/include/configs/HUB405.h
+++ b/include/configs/HUB405.h
@@ -157,7 +157,8 @@
 #define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CFG_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff
diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h
index 4acbcd5e1c..652210c19d 100644
--- a/include/configs/PLU405.h
+++ b/include/configs/PLU405.h
@@ -177,7 +177,8 @@
 #define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CFG_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff
diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h
index 3880ec7476..14848abe5b 100644
--- a/include/configs/VOH405.h
+++ b/include/configs/VOH405.h
@@ -163,7 +163,8 @@
 #define CFG_NAND_CLE            (0x80000000 >> 2)   /* our CLE is GPIO2 */
 #define CFG_NAND_ALE            (0x80000000 >> 3)   /* our ALE is GPIO3 */
 
-#define CFG_NAND_SKIP_BAD_DOT_I      1  /* ".i" read skips bad blocks   */
+#define CFG_NAND_SKIP_BAD_DOT_I 1       /* ".i" read skips bad blocks   */
+#define CFG_NAND_QUIET          1
 
 /*-----------------------------------------------------------------------
  * PCI stuff
-- 
cgit 


From eb6da8050797c204c9d010548424186c7ce32fc1 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Sun, 16 Sep 2007 02:39:35 +0200
Subject: TQM8xx/FPS8xx: adjust flash partitions for 2.6 ARCH=powerpc kernels

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/configs/FPS850L.h | 60 +++++++++++++++++++++++++++++++++--------------
 include/configs/FPS860L.h | 46 ++++++++++++++++++++++++++++--------
 include/configs/TQM823L.h |  5 ++--
 include/configs/TQM823M.h |  5 ++--
 include/configs/TQM850L.h |  5 ++--
 include/configs/TQM850M.h |  5 ++--
 include/configs/TQM855L.h |  5 ++--
 include/configs/TQM855M.h |  5 ++--
 include/configs/TQM860L.h |  5 ++--
 include/configs/TQM860M.h |  5 ++--
 include/configs/TQM862L.h |  5 ++--
 include/configs/TQM862M.h |  5 ++--
 include/configs/TQM866M.h |  5 ++--
 13 files changed, 111 insertions(+), 50 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/FPS850L.h b/include/configs/FPS850L.h
index 322158c7b8..3b0ddb4ec6 100644
--- a/include/configs/FPS850L.h
+++ b/include/configs/FPS850L.h
@@ -39,28 +39,44 @@
 #undef	CONFIG_8xx_CONS_SMC1
 #define	CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2		*/
 #undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		19200
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-#define CONFIG_BOOTCOMMAND	"bootm 40020000" /* autoboot command	*/
+#define CONFIG_BAUDRATE		115200
 
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
+#define	CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 
 #define CONFIG_BOARD_TYPES	1	/* support board types		*/
 
-#define CONFIG_BOOTARGS		"root=/dev/nfs rw "			\
-				"nfsroot=10.0.0.2:/opt/eldk/ppc_8xx "	\
-				"nfsaddrs=10.0.0.99:10.0.0.2"
+#define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"rootpath=/opt/eldk/ppc_8xx\0"					\
+	"bootfile=/tftpboot/fps850L/uImage\0"				\
+	"fdt_addr=40040000\0"						\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
 
 #undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
 
-
 /*
  * BOOTP options
  */
@@ -80,24 +96,32 @@
 #define CONFIG_BOOTP_NTPSERVER
 #define CONFIG_BOOTP_TIMEOFFSET
 
+#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
-#undef CONFIG_CMD_CONSOLE
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_LOADS
-#undef CONFIG_CMD_LOADB
-#undef CONFIG_CMD_CACHE
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
 
 
 /*
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CFG_HUSH_PARSER
+#define	CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
 #if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
diff --git a/include/configs/FPS860L.h b/include/configs/FPS860L.h
index f8698b5708..6fec07540c 100644
--- a/include/configs/FPS860L.h
+++ b/include/configs/FPS860L.h
@@ -40,18 +40,37 @@
 #define	CONFIG_8xx_CONS_SMC2	1	/* Console is on SMC2		*/
 #undef	CONFIG_8xx_CONS_NONE
 #define CONFIG_BAUDRATE		115200
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
+
+#define	CONFIG_BOOTCOUNT_LIMIT
+
 #define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-#define CONFIG_BOOTCOMMAND	"bootm 40040000" /* autoboot command	*/
 
 #define CONFIG_BOARD_TYPES	1	/* support board types		*/
 
-#define CONFIG_BOOTARGS		"root=/dev/nfs rw "			\
-				"nfsroot=10.0.0.2:/opt/eldk/ppc_8xx "	\
-				"nfsaddrs=10.0.0.99:10.0.0.2"
+#define CONFIG_PREBOOT	"echo;echo Type \"run flash_nfs\" to mount root filesystem over NFS;echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"flash_nfs=run nfsargs addip;"					\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip;"					\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
+	"rootpath=/opt/eldk/ppc_8xx\0"					\
+	"bootfile=/tftpboot/fps850L/uImage\0"				\
+	"fdt_addr=40040000\0"						\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #undef	CFG_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
@@ -79,11 +98,11 @@
 
 #define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
 
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
+
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
@@ -95,7 +114,14 @@
  * Miscellaneous configurable options
  */
 #define	CFG_LONGHELP			/* undef to save memory		*/
-#define	CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#define	CFG_PROMPT		"=> "	/* Monitor Command Prompt	*/
+
+#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
+#define CFG_HUSH_PARSER		1	/* Use the HUSH parser		*/
+#ifdef	CFG_HUSH_PARSER
+#define	CFG_PROMPT_HUSH_PS2	"> "
+#endif
+
 #if defined(CONFIG_CMD_KGDB)
 #define	CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
 #else
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 2bdcf2cf95..384789b132 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -70,8 +70,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM823L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
-	"ramdisk_addr=40100000\0"					\
+	"fdt_addr=40040000\0"						\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index 58bc5d3f95..47f416b49d 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -70,8 +70,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM823M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
-	"ramdisk_addr=40180000\0"					\
+	"fdt_addr=40080000\0"						\
+	"kernel_addr=400A0000\0"					\
+	"ramdisk_addr=40280000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 74b16c7cf9..e4b0bd2796 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -66,8 +66,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM850L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
-	"ramdisk_addr=40100000\0"					\
+	"fdt_addr=40040000\0"						\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index e3936c3304..f26c46e99a 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -64,8 +64,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM850M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
-	"ramdisk_addr=40180000\0"					\
+	"fdt_addr=40080000\0"						\
+	"kernel_addr=400A0000\0"					\
+	"ramdisk_addr=40280000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index ae22b77d7f..330c931cc1 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -69,8 +69,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM855L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
-	"ramdisk_addr=40100000\0"					\
+	"fdt_addr=40040000\0"						\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 5d54f876c8..77c2f114a2 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -69,8 +69,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM855M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
-	"ramdisk_addr=40180000\0"					\
+	"fdt_addr=40080000\0"						\
+	"kernel_addr=400A0000\0"					\
+	"ramdisk_addr=40280000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index 40c0940d5a..a903c2b342 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -69,8 +69,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM860L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
-	"ramdisk_addr=40100000\0"					\
+	"fdt_addr=40040000\0"						\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index 481e3d0d53..b905a0a635 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -69,8 +69,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM860M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
-	"ramdisk_addr=40180000\0"					\
+	"fdt_addr=40080000\0"						\
+	"kernel_addr=400A0000\0"					\
+	"ramdisk_addr=40280000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index bb3b1cc541..d8ddf37fa9 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -72,8 +72,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM862L/uImage\0"				\
-	"kernel_addr=40040000\0"					\
-	"ramdisk_addr=40100000\0"					\
+	"fdt_addr=40040000\0"						\
+	"kernel_addr=40060000\0"					\
+	"ramdisk_addr=40200000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index d687d082c9..50607f0e52 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -72,8 +72,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM862M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
-	"ramdisk_addr=40180000\0"					\
+	"fdt_addr=40080000\0"						\
+	"kernel_addr=400A0000\0"					\
+	"ramdisk_addr=40280000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index ff00c13308..ea310c4235 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -81,8 +81,9 @@
 	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"	\
 	"rootpath=/opt/eldk/ppc_8xx\0"					\
 	"bootfile=/tftpboot/TQM866M/uImage\0"				\
-	"kernel_addr=40080000\0"					\
-	"ramdisk_addr=40180000\0"					\
+	"fdt_addr=40080000\0"						\
+	"kernel_addr=400A0000\0"					\
+	"ramdisk_addr=40280000\0"					\
 	""
 #define CONFIG_BOOTCOMMAND	"run flash_self"
 
-- 
cgit 


From 67c31036acaaaa992fc346cc89db0909a7e733c4 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Sun, 16 Sep 2007 17:10:04 +0200
Subject: TQM8xx[LM]: Fix broken environment alignment.

With recent toolchains, the environment sectors were no longer aligned to
sector boundaries. The reason was a combination of two bugs:

1) common/environment.c assumed that CONFIG_TQM8xxL would be defined
   for all TQM8xxL and TQM8xxM boards. But "include/common.h", where
   this gets defined, is not included here (and cannot be included
   without causing lots of problems).

   Added a new #define CFG_USE_PPCENV for all boards which really
   want to put the environment is a ".ppcenv" section.

2) The linker scripts just include environment.o, silently assuming
   that the objects in that file are really in the order in which
   they are coded in the C file, i. e. "environment" first, then
   "redundand_environment", and "env_size" last. However, current
   toolchains (GCC-4.x) reorder the objects, causing the environment
   data not to start on a flash sector boundary:

   Instead of:					we got:

	40008000 T environment			40008000 T env_size
	4000c000 T redundand_environment	40008004 T redundand_environment
	40010000 T env_size			4000c004 T environment

   Note: this patch fixes just the first part, and cures the alignment
   problem by making sure that "env_size" gets placed correctly. However,
   we still have a potential issue because primary and redundant
   environment sectors are actually swapped, i. e. we have now:

	40008000 T redundand_environment
	4000c000 T environment
	40010000 T env_size

   This shall be fixed in the next version.

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/configs/CATcenter.h      | 2 ++
 include/configs/FADS823.h        | 1 +
 include/configs/FADS850SAR.h     | 1 +
 include/configs/ICU862.h         | 1 +
 include/configs/M5271EVB.h       | 5 ++---
 include/configs/PPChameleonEVB.h | 2 ++
 include/configs/R360MPI.h        | 1 +
 include/configs/RRvision.h       | 2 ++
 include/configs/TQM823L.h        | 2 ++
 include/configs/TQM823M.h        | 2 ++
 include/configs/TQM850L.h        | 2 ++
 include/configs/TQM850M.h        | 2 ++
 include/configs/TQM855L.h        | 2 ++
 include/configs/TQM855M.h        | 2 ++
 include/configs/TQM860L.h        | 2 ++
 include/configs/TQM860M.h        | 2 ++
 include/configs/TQM862L.h        | 2 ++
 include/configs/TQM862M.h        | 2 ++
 include/configs/TQM866M.h        | 2 ++
 include/configs/cmi_mpc5xx.h     | 5 +++--
 include/configs/hymod.h          | 1 +
 include/configs/idmr.h           | 2 ++
 include/configs/trab.h           | 2 ++
 include/configs/virtlab2.h       | 2 ++
 24 files changed, 44 insertions(+), 5 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/CATcenter.h b/include/configs/CATcenter.h
index 62a2eaa236..0321650f3d 100644
--- a/include/configs/CATcenter.h
+++ b/include/configs/CATcenter.h
@@ -399,6 +399,8 @@
 #define CFG_ENV_ADDR_REDUND	0xFFFFA000
 #define CFG_ENV_SIZE_REDUND	0x2000
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 #define CFG_NVRAM_BASE_ADDR	0xF0000500		/* NVRAM base address	*/
 #define CFG_NVRAM_SIZE		242			/* NVRAM size		*/
 
diff --git a/include/configs/FADS823.h b/include/configs/FADS823.h
index a562b2fa4e..f810af2cec 100644
--- a/include/configs/FADS823.h
+++ b/include/configs/FADS823.h
@@ -206,6 +206,7 @@
 #define	CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
 #define	CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/FADS850SAR.h b/include/configs/FADS850SAR.h
index c8ce25957b..a09c0e0393 100644
--- a/include/configs/FADS850SAR.h
+++ b/include/configs/FADS850SAR.h
@@ -156,6 +156,7 @@
 #define	CFG_ENV_IS_IN_FLASH	1
 #define CFG_ENV_OFFSET		0x00040000	/* Offset of Environment Sector */
 #define	CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector	*/
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h
index 27a5bc302f..da54cef534 100644
--- a/include/configs/ICU862.h
+++ b/include/configs/ICU862.h
@@ -234,6 +234,7 @@
 
 #define CFG_ENV_SECT_SIZE	0x40000	/* Total Size of Environment sector	*/
 #define	CFG_ENV_SIZE		0x4000	/* Used Size of Environment Sector	*/
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/M5271EVB.h b/include/configs/M5271EVB.h
index 0f97050f21..798ec0c7a4 100644
--- a/include/configs/M5271EVB.h
+++ b/include/configs/M5271EVB.h
@@ -54,13 +54,12 @@
  */
 #ifndef CONFIG_MONITOR_IS_IN_RAM
 #define CFG_ENV_OFFSET		0x4000
-#define CFG_ENV_SECT_SIZE	0x2000
-#define CFG_ENV_IS_IN_FLASH	1
 #else
 #define CFG_ENV_ADDR		0xffe04000
+#endif
 #define CFG_ENV_SECT_SIZE	0x2000
 #define CFG_ENV_IS_IN_FLASH	1
-#endif
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*
  * BOOTP options
diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h
index dd1decdcd9..8a74c4f5c9 100644
--- a/include/configs/PPChameleonEVB.h
+++ b/include/configs/PPChameleonEVB.h
@@ -429,6 +429,8 @@
 #define CFG_ENV_ADDR_REDUND	0xFFFFA000
 #define CFG_ENV_SIZE_REDUND	0x2000
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 #endif	/* ENVIRONMENT_IN_EEPROM */
 
 
diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h
index 516ec643d6..a98b4af29e 100644
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -233,6 +233,7 @@
 #define	CFG_ENV_OFFSET		0x40000	/* Offset of Environment		*/
 #define	CFG_ENV_SECT_SIZE	0x20000	/* Total Size of Environment sector	*/
 #define	CFG_ENV_SIZE		0x4000	/* Used Size of Environment sector	*/
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h
index 1e6e8c0aa2..32e2285454 100644
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -235,6 +235,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index 384789b132..7a3801026f 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -206,6 +206,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index 47f416b49d..e8b6a80b19 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -203,6 +203,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index e4b0bd2796..beeca6343e 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -193,6 +193,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index f26c46e99a..d5609c1d48 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -192,6 +192,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index 330c931cc1..e35b5b2ac1 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -197,6 +197,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 77c2f114a2..cd5212eff8 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -232,6 +232,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index a903c2b342..d5838dbf37 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -200,6 +200,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index b905a0a635..684b86f2ef 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -199,6 +199,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index d8ddf37fa9..f09d3d1654 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -201,6 +201,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 50607f0e52..039aa3af42 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -202,6 +202,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index ea310c4235..0d778919a2 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -242,6 +242,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
diff --git a/include/configs/cmi_mpc5xx.h b/include/configs/cmi_mpc5xx.h
index 85c2b96fec..a869364c60 100644
--- a/include/configs/cmi_mpc5xx.h
+++ b/include/configs/cmi_mpc5xx.h
@@ -171,8 +171,9 @@
 #define	CFG_ENV_IS_IN_FLASH	1
 
 #ifdef	CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET		0x00020000		/* Environment starts at this adress 	*/
-#define	CFG_ENV_SIZE		0x00010000		/* Set whole sector as env 		*/
+#define CFG_ENV_OFFSET		0x00020000	/* Environment starts at this adress 	*/
+#define	CFG_ENV_SIZE		0x00010000	/* Set whole sector as env 		*/
+#define	CFG_USE_PPCENV				/* Environment embedded in sect .ppcenv */
 #endif
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index 2f64ec238c..2547afb3cf 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -406,6 +406,7 @@
 #define	CFG_ENV_SIZE		0x40000	/* Total Size of Environment Sector */
 #define CFG_ENV_SECT_SIZE	0x40000	/* see README - env sect real size */
 #define	CFG_ENV_ADDR	(CFG_FLASH_BASE+CFG_MONITOR_LEN-CFG_ENV_SECT_SIZE)
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/idmr.h b/include/configs/idmr.h
index 404e88a4fc..3821ebcf0d 100644
--- a/include/configs/idmr.h
+++ b/include/configs/idmr.h
@@ -125,6 +125,8 @@
 #define CFG_ENV_IS_IN_FLASH
 #endif /* !CONFIG_MONITOR_IS_IN_RAM */
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 #define CFG_PROMPT		"=> "
 #define CFG_LONGHELP				/* undef to save memory */
 
diff --git a/include/configs/trab.h b/include/configs/trab.h
index dbccea28ad..b9088a89ab 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -419,6 +419,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /* Initial value of the on-board touch screen brightness */
 #define CFG_BRIGHTNESS 0x20
 
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 561a8bc47b..edae6f4b98 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -207,6 +207,8 @@
 #define CFG_ENV_OFFSET_REDUND	(CFG_ENV_OFFSET+CFG_ENV_SIZE)
 #define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
 
+#define	CFG_USE_PPCENV			/* Environment embedded in sect .ppcenv */
+
 /*-----------------------------------------------------------------------
  * Hardware Information Block
  */
-- 
cgit 


From a4f3aab6dfbed6c29367c688bfb8a47eef62c225 Mon Sep 17 00:00:00 2001
From: Eirik Aanonsen <eaa@wprmedical.com>
Date: Wed, 12 Sep 2007 13:32:37 +0200
Subject: Add some comments to clocks in atstk1002.h

This patch applies some clarifying comments to how the different
clocks are setup according to atstk1002.h Some of the previous
comments where stating wrongful information.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
 include/configs/atstk1002.h | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index f7bf62c825..7533b0ef9c 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -39,8 +39,10 @@
 #define CFG_HZ				1000
 
 /*
- * Set up the PLL to run at 199.5 MHz, the CPU to run at 1/2 the PLL
- * frequency and the peripherals to run at 1/4 the PLL frequency.
+ * Set up the PLL to run at 140 MHz, the CPU to run at the PLL
+ * frequency, the HSB and PBB at 1/2, and the PBA to run at 1/4 the
+ * PLL frequency.
+ * (CFG_OSC0_HZ * CFG_PLL0_MUL) / CFG_PLL0_DIV = PLL MHz
  */
 #define CONFIG_PLL			1
 #define CFG_POWER_MANAGER		1
@@ -48,9 +50,25 @@
 #define CFG_PLL0_DIV			1
 #define CFG_PLL0_MUL			7
 #define CFG_PLL0_SUPPRESS_CYCLES	16
+/*
+ * Set the CPU running at:
+ * PLL / (2^CFG_CLKDIV_CPU) = CPU MHz
+ */
 #define CFG_CLKDIV_CPU			0
+/*
+ * Set the HSB running at:
+ * PLL / (2^CFG_CLKDIV_HSB) = HSB MHz
+ */
 #define CFG_CLKDIV_HSB			1
+/*
+ * Set the PBA running at:
+ * PLL / (2^CFG_CLKDIV_PBA) = PBA MHz
+ */
 #define CFG_CLKDIV_PBA			2
+/*
+ * Set the PBB running at:
+ * PLL / (2^CFG_CLKDIV_PBB) = PBB MHz
+ */
 #define CFG_CLKDIV_PBB			1
 
 /*
-- 
cgit 


From e80e585b00fbbab7ad1bf71619741f2c5b029ab7 Mon Sep 17 00:00:00 2001
From: Eirik Aanonsen <eaa@wprmedical.com>
Date: Tue, 18 Sep 2007 08:47:20 +0200
Subject: Update atstk1002 bootargs.

Updates to atstk1002 U-Boot header file:
- Changed bootargs:
    * Set the bootargs for at1002 to point to the SD-card partition instead
    * ... of the boot flash.
    * Removing the rootfstype since that argument are not needed.

Signed-off-by: Eirik Aanonsen <eaa@wprmedical.com>
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
 include/configs/atstk1002.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 7533b0ef9c..572ac23d3e 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -96,7 +96,7 @@
 
 #define CONFIG_BAUDRATE			115200
 #define CONFIG_BOOTARGS							\
-	"console=ttyS0 root=/dev/mtdblock1 rootfstype=jffs2 fbmem=600k"
+	"console=ttyS0 root=/dev/mmcblk0p1 fbmem=600k rootwait=1"
 
 #define CONFIG_BOOTCOMMAND						\
 	"fsload; bootm $(fileaddr)"
-- 
cgit 


From 8a783a65851bc7421ab69f442261215e21b8891a Mon Sep 17 00:00:00 2001
From: Grant Likely <grant.likely@secretlab.ca>
Date: Tue, 18 Sep 2007 12:24:57 -0600
Subject: Bugfix: remove embedded null (\0) from CFG_BOOTFILE macro in
 TQM8540_config

/bin/bash and /bin/dash (which /bin/sh is linked to on ubuntu) handle embedded
nulls in a string differently.  For example, the following statement:
    echo "this is a string\0" > afile
Will produce the following with /bin/bash:
    "this is a string\0"
But with /bin/dash, will produce:
    "this is a string

Bug fixed by moving the embedded null out of the makefile and into the
config header.  Also renamed the macro to avoid usage colision with the same
macro used by other board ports.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
---
 include/configs/TQM85xx.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h
index 2f23c50493..6dbd3924bd 100644
--- a/include/configs/TQM85xx.h
+++ b/include/configs/TQM85xx.h
@@ -449,7 +449,7 @@
 #undef	CONFIG_BOOTARGS		/* the boot command will set bootargs	*/
 
 #define	CONFIG_EXTRA_ENV_SETTINGS					\
-	CFG_BOOTFILE							\
+	"bootfile="CFG_BOOTFILE_PATH"\0"				\
 	"netdev=eth0\0"							\
 	"consdev=ttyS0\0"						\
 	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-- 
cgit 


From b90c045f035c3cc9b5d2edaed6048dfb74e40763 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 24 Sep 2007 00:08:37 +0200
Subject: synchronizition with mainline

---
 include/configs/ml401.h  | 50 ++++++++++++++++++++------------------
 include/configs/suzaku.h | 18 ++++++++------
 include/configs/xupv2p.h | 63 +++++++++++++++++-------------------------------
 3 files changed, 58 insertions(+), 73 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 74fe88867e..7eeae708a7 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -1,7 +1,7 @@
 /*
  * (C) Copyright 2007 Czech Technical University.
  *
- * Michal SIMEK <monstr@monstr.eu>
+ * Michal SIMEK <monstr@seznam.cz>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -32,7 +32,6 @@
 #define	CONFIG_ML401		1	/* ML401 Board */
 
 /* uart */
-#define	XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
@@ -87,7 +86,7 @@
  * 0x11FB_F000	CFG_MONITOR_BASE
  *					MONITOR_CODE	256kB	Env
  * 0x13FF_F000	CFG_GBL_DATA_OFFSET
- *					GLOBAL_DATA	4kB	bd, gd
+ * 					GLOBAL_DATA	4kB	bd, gd
  * 0x1400_0000	CFG_SDRAM_BASE + CFG_SDRAM_SIZE
  */
 
@@ -100,7 +99,7 @@
 /* global pointer */
 #define	CFG_GBL_DATA_SIZE	0x1000	/* size of global data */
 /* start of global data */
-#define	CFG_GBL_DATA_OFFSET	(CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define	CFG_GBL_DATA_OFFSET     (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
 
 /* monitor code */
 #define	SIZE			0x40000
@@ -146,16 +145,6 @@
 	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
 #endif /* !FLASH */
 
-/* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
-	#define	CONFIG_SYSTEMACE
-	/* #define DEBUG_SYSTEMACE */
-	#define	SYSTEMACE_CONFIG_FPGA
-	#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-	#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
-	#define	CONFIG_DOS_PARTITION
-#endif
-
 /*
  * BOOTP options
  */
@@ -164,21 +153,28 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
+
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_BDI
 #define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IMI
 #define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
 #define CONFIG_CMD_MFSL
+#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-
-#if defined(CONFIG_SYSTEMACE)
-	#define CONFIG_CMD_EXT2
-	#define CONFIG_CMD_FAT
-#endif
+#define CONFIG_CMD_RUN
 
 #if defined(FLASH)
 	#define CONFIG_CMD_ECHO
@@ -190,8 +186,6 @@
 		#define CONFIG_CMD_ENV
 		#define CONFIG_CMD_SAVES
 	#endif
-#else
-	#undef CONFIG_CMD_FLASH
 #endif
 
 #if defined(CONFIG_CMD_JFFS2)
@@ -216,16 +210,24 @@
 #define	CONFIG_BOOTDELAY	30
 #define	CONFIG_BOOTARGS		"root=romfs"
 #define	CONFIG_HOSTNAME		"ml401"
-#define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
+#define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
-#define	CONFIG_SERVERIP		192.168.0.5
-#define	CONFIG_GATEWAYIP	192.168.0.1
+#define	CONFIG_SERVERIP 	192.168.0.5
+#define	CONFIG_GATEWAYIP 	192.168.0.1
 #define	CONFIG_ETHADDR		00:E0:0C:00:00:FD
 
 /* architecture dependent code */
 #define	CFG_USR_EXCEP	/* user exception */
 #define CFG_HZ	1000
 
+/* system ace */
+#define	CONFIG_SYSTEMACE
+/* #define DEBUG_SYSTEMACE */
+#define	SYSTEMACE_CONFIG_FPGA
+#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
+#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
+#define	CONFIG_DOS_PARTITION
+
 #define	CONFIG_PREBOOT		"echo U-BOOT for ML401;setenv preboot;echo"
 
 #define	CONFIG_EXTRA_ENV_SETTINGS	"unlock=yes\0" /* hardware flash protection */\
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 9a2eec1bb2..08ac9cbd58 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -48,7 +48,6 @@
 #define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 #define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - (1024 * 1024))
 
-#define XILINX_UARTLITE
 #define CONFIG_BAUDRATE		115200
 #define CFG_BAUDRATE_TABLE	{ 115200 }
 
@@ -56,16 +55,21 @@
 #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
 #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
 
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
-#undef CONFIG_CMD_BDI
-#undef CONFIG_CMD_ENV
-#undef CONFIG_CMD_MEMORY
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_MISC
 
 #define CFG_UART1_BASE		(0xFFFF2000)
 #define CONFIG_SERIAL_BASE	CFG_UART1_BASE
@@ -104,6 +108,4 @@
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
-#define XILINX_CLOCK_FREQ	50000000
-
 #endif	/* __CONFIG_H */
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index 006a132881..35001d7ada 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -31,34 +31,13 @@
 #define	CONFIG_XUPV2P		1
 
 /* uart */
-#ifdef XILINX_UARTLITE_BASEADDR
-#define	XILINX_UARTLITE
-#define	CONFIG_SERIAL_BASE	XILINX_UARTLITE_BASEADDR
-#define	CONFIG_BAUDRATE		XILINX_UARTLITE_BAUDRATE
+#define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
+#define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
-#else
-#ifdef XILINX_UART16550_BASEADDR
-#define CFG_NS16550
-#define CFG_NS16550_SERIAL
-#define CFG_NS16550_REG_SIZE	4
-#define CONFIG_CONS_INDEX	1
-#define CFG_NS16550_COM1	XILINX_UART16550_BASEADDR
-#define CFG_NS16550_CLK		XILINX_UART16550_CLOCK_HZ
-
-#define	CONFIG_BAUDRATE		115200
-#define	CFG_BAUDRATE_TABLE	{ 9600, 115200 }
-#endif
-#endif
 
 /* ethernet */
-#ifdef XILINX_EMAC_BASEADDR
-#define XILINX_EMAC	1
-#else
-#ifdef XILINX_EMACLITE_BASEADDR
-#define XILINX_EMACLITE	1
-#endif
-#endif
-#undef ET_DEBUG
+#define CONFIG_EMAC	1
+#define XPAR_EMAC_0_DEVICE_ID	XPAR_XEMAC_NUM_INSTANCES
 
 /*
  * setting reset address
@@ -69,13 +48,11 @@
  * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
  * jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
  */
-/* #define	CFG_RESET_ADDRESS	0x36000000 */
+#define	CFG_RESET_ADDRESS	0x36000000
 
 /* gpio */
-#ifdef XILINX_GPIO_BASEADDR
 #define	CFG_GPIO_0		1
 #define	CFG_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
-#endif
 
 /* interrupt controller */
 #define	CFG_INTC_0		1
@@ -142,6 +119,7 @@
 #define	CFG_ENV_SIZE		0x1000
 #define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
 
+
 /*
  * BOOTP options
  */
@@ -150,24 +128,29 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
+
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
-#undef CONFIG_CMD_FLASH
-#undef CONFIG_CMD_IMLS
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_MEMORY
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_MFSL
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
 #define CONFIG_CMD_PING
 
-#ifdef XILINX_SYSACE_BASEADDR
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#endif
 
 /* Miscellaneous configurable options */
 #define	CFG_PROMPT	"U-Boot-mONStR> "
@@ -179,7 +162,7 @@
 
 #define	CONFIG_BOOTDELAY 	30
 #define	CONFIG_BOOTARGS		"root=romfs"
-#define	CONFIG_HOSTNAME		"xupv2p"
+#define	CONFIG_HOSTNAME		"ml401"
 #define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
 #define	CONFIG_SERVERIP 	192.168.0.5
@@ -195,13 +178,11 @@
 	"echo"
 
 /* system ace */
-#ifdef XILINX_SYSACE_BASEADDR
 #define	CONFIG_SYSTEMACE
 /* #define DEBUG_SYSTEMACE */
 #define	SYSTEMACE_CONFIG_FPGA
 #define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
 #define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
 #define	CONFIG_DOS_PARTITION
-#endif
 
 #endif	/* __CONFIG_H */
-- 
cgit 


From 0731cbae6c2feab93b244d83fd6a43f5cc9bf852 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 24 Sep 2007 00:25:11 +0200
Subject: [PATCH] Change macro name for UartLite because PowerPC 405 can use
 UartLite as console

---
 include/configs/ml401.h  | 1 +
 include/configs/suzaku.h | 1 +
 include/configs/xupv2p.h | 1 +
 3 files changed, 3 insertions(+)

(limited to 'include/configs')

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 7eeae708a7..2cf0949577 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -32,6 +32,7 @@
 #define	CONFIG_ML401		1	/* ML401 Board */
 
 /* uart */
+#define CONFIG_XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 08ac9cbd58..2353b63f5d 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -48,6 +48,7 @@
 #define CFG_MALLOC_LEN		(256 << 10)	/* Reserve 256 kB for malloc */
 #define CFG_MALLOC_BASE		(CFG_MONITOR_BASE - (1024 * 1024))
 
+#define CONFIG_XILINX_UARTLITE
 #define CONFIG_BAUDRATE		115200
 #define CFG_BAUDRATE_TABLE	{ 115200 }
 
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index 35001d7ada..8ab0b49cd0 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -31,6 +31,7 @@
 #define	CONFIG_XUPV2P		1
 
 /* uart */
+#define CONFIG_XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
-- 
cgit 


From cb1bc63b75a232571eb69aa2c8aa919321655845 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 24 Sep 2007 00:30:42 +0200
Subject: [FIX] Email reparation & Copyright Both codes are written by myself
 without any support from CTU

---
 include/configs/ml401.h  | 4 ++--
 include/configs/xupv2p.h | 2 +-
 2 files changed, 3 insertions(+), 3 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 2cf0949577..48291e89da 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -1,7 +1,7 @@
 /*
- * (C) Copyright 2007 Czech Technical University.
+ * (C) Copyright 2007 Michal Simek
  *
- * Michal SIMEK <monstr@seznam.cz>
+ * Michal SIMEK <monstr@monstr.eu>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index 8ab0b49cd0..b1c0ee666f 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2007 Czech Technical University.
+ * (C) Copyright 2007 Michal Simek
  *
  * Michal SIMEK <monstr@monstr.eu>
  *
-- 
cgit 


From f240356507038e5ce55e8a24cb2607e9eae6d10c Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 24 Sep 2007 00:36:06 +0200
Subject: [FIX] change sets of commands because changing of command handling
 brings compilation problems

---
 include/configs/suzaku.h | 18 ++++++++----------
 1 file changed, 8 insertions(+), 10 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/suzaku.h b/include/configs/suzaku.h
index 2353b63f5d..020ed02304 100644
--- a/include/configs/suzaku.h
+++ b/include/configs/suzaku.h
@@ -56,21 +56,16 @@
 #define MICROBLAZE_SYSREG_BASE_ADDR 0xFFFFA000
 #define MICROBLAZE_SYSREG_RECONFIGURE (1 << 0)
 
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_ENV
+#undef CONFIG_CMD_MEMORY
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_MISC
 
 #define CFG_UART1_BASE		(0xFFFF2000)
 #define CONFIG_SERIAL_BASE	CFG_UART1_BASE
@@ -109,4 +104,7 @@
 #define CFG_GBL_DATA_OFFSET    (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
 #define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
 
+#define XILINX_CLOCK_FREQ	50000000
+#define CONFIG_XILINX_CLOCK_FREQ	XILINX_CLOCK_FREQ
+
 #endif	/* __CONFIG_H */
-- 
cgit 


From 853643d8cf2ca80cb2e25c53ad5dc580abafe166 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Mon, 24 Sep 2007 00:41:30 +0200
Subject: [FIX] change command handling and removing code violation

---
 include/configs/ml401.h | 50 ++++++++++++++++++++++++-------------------------
 1 file changed, 24 insertions(+), 26 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 48291e89da..b32043850e 100644
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -32,7 +32,7 @@
 #define	CONFIG_ML401		1	/* ML401 Board */
 
 /* uart */
-#define CONFIG_XILINX_UARTLITE
+#define	CONFIG_XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
@@ -59,6 +59,7 @@
 #define	CFG_TIMER_0_IRQ		XILINX_TIMER_IRQ
 #define	FREQUENCE		XILINX_CLOCK_FREQ
 #define	CFG_TIMER_0_PRELOAD	( FREQUENCE/1000 )
+#define	CONFIG_XILINX_CLOCK_FREQ	XILINX_CLOCK_FREQ
 
 /* FSL */
 #define	CFG_FSL_2
@@ -87,7 +88,7 @@
  * 0x11FB_F000	CFG_MONITOR_BASE
  *					MONITOR_CODE	256kB	Env
  * 0x13FF_F000	CFG_GBL_DATA_OFFSET
- * 					GLOBAL_DATA	4kB	bd, gd
+ *					GLOBAL_DATA	4kB	bd, gd
  * 0x1400_0000	CFG_SDRAM_BASE + CFG_SDRAM_SIZE
  */
 
@@ -100,7 +101,7 @@
 /* global pointer */
 #define	CFG_GBL_DATA_SIZE	0x1000	/* size of global data */
 /* start of global data */
-#define	CFG_GBL_DATA_OFFSET     (CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
+#define	CFG_GBL_DATA_OFFSET	(CFG_SDRAM_BASE + CFG_SDRAM_SIZE - CFG_GBL_DATA_SIZE)
 
 /* monitor code */
 #define	SIZE			0x40000
@@ -146,6 +147,16 @@
 	#define	CFG_FLASH_PROTECTION		/* hardware flash protection */
 #endif /* !FLASH */
 
+/* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
+	#define	CONFIG_SYSTEMACE
+	/* #define DEBUG_SYSTEMACE */
+	#define	SYSTEMACE_CONFIG_FPGA
+	#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
+	#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
+	#define	CONFIG_DOS_PARTITION
+#endif
+
 /*
  * BOOTP options
  */
@@ -154,28 +165,21 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
 #define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_AUTOSCRIPT
-#define CONFIG_CMD_BDI
 #define CONFIG_CMD_CACHE
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IMI
 #define CONFIG_CMD_IRQ
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_MISC
 #define CONFIG_CMD_MFSL
-#define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_RUN
+
+#if defined(CONFIG_SYSTEMACE)
+	#define CONFIG_CMD_EXT2
+	#define CONFIG_CMD_FAT
+#endif
 
 #if defined(FLASH)
 	#define CONFIG_CMD_ECHO
@@ -187,6 +191,8 @@
 		#define CONFIG_CMD_ENV
 		#define CONFIG_CMD_SAVES
 	#endif
+#else
+	#undef CONFIG_CMD_FLASH
 #endif
 
 #if defined(CONFIG_CMD_JFFS2)
@@ -211,24 +217,16 @@
 #define	CONFIG_BOOTDELAY	30
 #define	CONFIG_BOOTARGS		"root=romfs"
 #define	CONFIG_HOSTNAME		"ml401"
-#define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
+#define	CONFIG_BOOTCOMMAND	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
-#define	CONFIG_SERVERIP 	192.168.0.5
-#define	CONFIG_GATEWAYIP 	192.168.0.1
+#define	CONFIG_SERVERIP		192.168.0.5
+#define	CONFIG_GATEWAYIP	192.168.0.1
 #define	CONFIG_ETHADDR		00:E0:0C:00:00:FD
 
 /* architecture dependent code */
 #define	CFG_USR_EXCEP	/* user exception */
 #define CFG_HZ	1000
 
-/* system ace */
-#define	CONFIG_SYSTEMACE
-/* #define DEBUG_SYSTEMACE */
-#define	SYSTEMACE_CONFIG_FPGA
-#define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
-#define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
-#define	CONFIG_DOS_PARTITION
-
 #define	CONFIG_PREBOOT		"echo U-BOOT for ML401;setenv preboot;echo"
 
 #define	CONFIG_EXTRA_ENV_SETTINGS	"unlock=yes\0" /* hardware flash protection */\
-- 
cgit 


From 3e954beb614b5b190d7f4f4c3b641437a0132e35 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Tue, 11 Sep 2007 14:12:55 +0200
Subject: ppc4xx: lwmon5: Change GPIO 58 to default to low (watchdog test)

Signed-off-by: Stefan Roese <sr@denx.de>
---
 include/configs/lwmon5.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index be483245b9..a9db0862f4 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -472,7 +472,7 @@
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO55  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO56  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO57  Unselect via TraceSelect Bit	*/	\
-{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO58  Unselect via TraceSelect Bit	*/	\
+{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO58  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO59  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO60  Unselect via TraceSelect Bit	*/	\
 {GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61  Unselect via TraceSelect Bit	*/	\
-- 
cgit 


From 87c1833a39e944db66385286fd5e28f9b3fcdd50 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Tue, 2 Oct 2007 11:44:19 +0200
Subject: ppc4xx: lwmon5: Remove watchdog for now, since not fully tested yet

Signed-off-by: Stefan Roese <sr@denx.de>
---
 include/configs/lwmon5.h | 5 +++++
 1 file changed, 5 insertions(+)

(limited to 'include/configs')

diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h
index 8ec4742c0f..00c34d5d7b 100644
--- a/include/configs/lwmon5.h
+++ b/include/configs/lwmon5.h
@@ -339,7 +339,12 @@
 #define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC				*/
 #define CFG_PCI_SUBSYS_ID       0xcafe	/* Whatever			*/
 
+#if 0
+/*
+ * ToDo: Watchdog is not test fully, so exclude it for now
+ */
 #define CONFIG_HW_WATCHDOG	1	/* Use external HW-Watchdog	*/
+#endif
 
 /*
  * For booting Linux, the board info and command line data
-- 
cgit 


From 9add9884b1fddc34ca186e00a2f868ccd5d02d87 Mon Sep 17 00:00:00 2001
From: Haavard Skinnemoen <hskinnemoen@atmel.com>
Date: Tue, 2 Oct 2007 19:09:01 +0200
Subject: Fix memtest breakage

CFG_MEMTEST_START uses weird magic involving gd, which fails to
compile. Use hardcoded values instead (we actually know how much RAM
we have on board.)

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
---
 include/configs/atstk1002.h | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index 265264efbb..1809fc5d86 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -200,12 +200,8 @@
 #define CFG_PBSIZE			(CFG_CBSIZE + sizeof(CFG_PROMPT) + 16)
 #define CFG_LONGHELP			1
 
-#define CFG_MEMTEST_START						\
-	({ gd->bd->bi_dram[0].start; })
-#define CFG_MEMTEST_END							\
-	({								\
-		gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size;	\
-	})
+#define CFG_MEMTEST_START		CFG_SDRAM_BASE
+#define CFG_MEMTEST_END			(CFG_MEMTEST_START + 0x700000)
 #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }
 
 #endif /* __CONFIG_H */
-- 
cgit 


From 2b2a587d6d3076387d22ac740f44044bf46e2cb8 Mon Sep 17 00:00:00 2001
From: Marian Balakowicz <m8@semihalf.com>
Date: Fri, 5 Oct 2007 10:40:54 +0200
Subject: tqm5200: Fix CONFIG_CMD_PCI typo in board config file.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
---
 include/configs/TQM5200.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index e0c9d81be0..5fd6b279e4 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -188,7 +188,7 @@
 #endif
 
 #ifdef CONFIG_PCI
-#define CONFIG_CMD_CMD_PCI
+#define CONFIG_CMD_PCI
 #endif
 
 #if defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) || defined(CONFIG_FO300)
-- 
cgit 


From 8002012041f1ff9f997a5727abe5015f70cd2e46 Mon Sep 17 00:00:00 2001
From: Grzegorz Bernacki <gjb@semihalf.com>
Date: Tue, 9 Oct 2007 13:58:24 +0200
Subject: [ads5121] EEPROM support added.

Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
---
 include/configs/ads5121.h | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'include/configs')

diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index 22eac1b4b9..ee9cfd6768 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -234,6 +234,14 @@
 #define CFG_I2C_NOPROBES	{{0,0x69}}	* Don't probe these addrs */
 #endif
 
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR_LEN		2	/* 16-bit EEPROM address */
+#define CFG_I2C_EEPROM_ADDR		0x50	/* Atmel: AT24C32A-10TQ-2.7 */
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* 10ms of delay */ 
+#define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 32-Byte Page Write Mode */
+
 /*
  * Ethernet configuration
  */
@@ -275,6 +283,7 @@
 #define CONFIG_CMD_NFS
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_EEPROM
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-- 
cgit 


From e1893815b0999410d7a327589611c7b38e95299e Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Fri, 12 Oct 2007 15:49:39 +0200
Subject: GP3 SSA: enable RTC

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/configs/stxssa.h | 20 +++++++++++++-------
 1 file changed, 13 insertions(+), 7 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/stxssa.h b/include/configs/stxssa.h
index b41dafaf98..c6e7953209 100644
--- a/include/configs/stxssa.h
+++ b/include/configs/stxssa.h
@@ -189,20 +189,21 @@
 #define CFG_PROMPT_HUSH_PS2 "> "
 #endif
 
-/* I2C */
+/*
+ * I2C
+ */
 #define CONFIG_FSL_I2C			/* Use FSL common I2C driver */
 #define  CONFIG_HARD_I2C		/* I2C with hardware support*/
 #undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
-#if 0
-#define CFG_I2C_NOPROBES	{0x00}	/* Don't probe these addrs */
-#else
-/* I did the 'if 0' so we could keep the syntax above if ever needed. */
 #undef CFG_I2C_NOPROBES
-#endif
 #define CFG_I2C_OFFSET		0x3000
 
+/* I2C RTC */
+#define CONFIG_RTC_DS1337		/* This is really a DS1339 RTC	*/
+#define CFG_I2C_RTC_ADDR	0x68	/* at address 0x68		*/
+
 /* I2C EEPROM.	AT24C32, we keep our environment in here.
 */
 #define CFG_I2C_EEPROM_ADDR		0x51	/* 1010001x		*/
@@ -341,8 +342,13 @@
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_I2C
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SNTP
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
-- 
cgit 


From de74b9eeacccaf0a42e5ecc9ae79a88f7a311296 Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Sat, 13 Oct 2007 21:15:39 +0200
Subject: Coding Style cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 include/configs/ads5121.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/configs')

diff --git a/include/configs/ads5121.h b/include/configs/ads5121.h
index ee9cfd6768..bb1efdf6de 100644
--- a/include/configs/ads5121.h
+++ b/include/configs/ads5121.h
@@ -239,7 +239,7 @@
  */
 #define CFG_I2C_EEPROM_ADDR_LEN		2	/* 16-bit EEPROM address */
 #define CFG_I2C_EEPROM_ADDR		0x50	/* Atmel: AT24C32A-10TQ-2.7 */
-#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* 10ms of delay */ 
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS	10	/* 10ms of delay */
 #define CFG_EEPROM_PAGE_WRITE_BITS	5	/* 32-Byte Page Write Mode */
 
 /*
-- 
cgit 


From f8bf90461d9bad2e6fed31fcebaf235f60dd6763 Mon Sep 17 00:00:00 2001
From: Michal Simek <monstr@monstr.eu>
Date: Sun, 14 Oct 2007 16:12:29 +0200
Subject: [FIX] XUPV2P change command handling and remove code violation

---
 include/configs/xupv2p.h | 36 +++++++++++++++++-------------------
 1 file changed, 17 insertions(+), 19 deletions(-)

(limited to 'include/configs')

diff --git a/include/configs/xupv2p.h b/include/configs/xupv2p.h
index b1c0ee666f..c9320c287c 100644
--- a/include/configs/xupv2p.h
+++ b/include/configs/xupv2p.h
@@ -31,7 +31,7 @@
 #define	CONFIG_XUPV2P		1
 
 /* uart */
-#define CONFIG_XILINX_UARTLITE
+#define	CONFIG_XILINX_UARTLITE
 #define	CONFIG_SERIAL_BASE	XILINX_UART_BASEADDR
 #define	CONFIG_BAUDRATE		XILINX_UART_BAUDRATE
 #define	CFG_BAUDRATE_TABLE	{ CONFIG_BAUDRATE }
@@ -49,11 +49,13 @@
  * U-BOOT auto-relocate to TEXT_BASE. After RESET command Microblaze
  * jump to CFG_RESET_ADDRESS where is the original U-BOOT code.
  */
-#define	CFG_RESET_ADDRESS	0x36000000
+/* #define	CFG_RESET_ADDRESS	0x36000000 */
 
 /* gpio */
+#ifdef XILINX_GPIO_BASEADDR
 #define	CFG_GPIO_0		1
 #define	CFG_GPIO_0_ADDR		XILINX_GPIO_BASEADDR
+#endif
 
 /* interrupt controller */
 #define	CFG_INTC_0		1
@@ -66,6 +68,7 @@
 #define	CFG_TIMER_0_IRQ		XILINX_TIMER_IRQ
 #define	FREQUENCE		XILINX_CLOCK_FREQ
 #define	CFG_TIMER_0_PRELOAD	( FREQUENCE/1000 )
+#define	CONFIG_XILINX_CLOCK_FREQ	XILINX_CLOCK_FREQ
 
 /*
  * memory layout - Example
@@ -120,7 +123,6 @@
 #define	CFG_ENV_SIZE		0x1000
 #define	CFG_ENV_ADDR		(CFG_MONITOR_BASE - CFG_ENV_SIZE)
 
-
 /*
  * BOOTP options
  */
@@ -129,29 +131,23 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-
 /*
  * Command line configuration.
  */
 #include <config_cmd_default.h>
 
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+
 #define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_LOADS
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MISC
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_IRQ
 #define CONFIG_CMD_PING
 
+#ifdef XILINX_SYSACE_BASEADDR
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#endif
 
 /* Miscellaneous configurable options */
 #define	CFG_PROMPT	"U-Boot-mONStR> "
@@ -163,7 +159,7 @@
 
 #define	CONFIG_BOOTDELAY 	30
 #define	CONFIG_BOOTARGS		"root=romfs"
-#define	CONFIG_HOSTNAME		"ml401"
+#define	CONFIG_HOSTNAME		"xupv2p"
 #define	CONFIG_BOOTCOMMAND 	"base 0;tftp 11000000 image.img;bootm"
 #define	CONFIG_IPADDR		192.168.0.3
 #define	CONFIG_SERVERIP 	192.168.0.5
@@ -179,11 +175,13 @@
 	"echo"
 
 /* system ace */
+#ifdef XILINX_SYSACE_BASEADDR
 #define	CONFIG_SYSTEMACE
 /* #define DEBUG_SYSTEMACE */
 #define	SYSTEMACE_CONFIG_FPGA
 #define	CFG_SYSTEMACE_BASE	XILINX_SYSACE_BASEADDR
 #define	CFG_SYSTEMACE_WIDTH	XILINX_SYSACE_MEM_WIDTH
 #define	CONFIG_DOS_PARTITION
+#endif
 
 #endif	/* __CONFIG_H */
-- 
cgit 


From 5a5958b7de70ae99f0e7cbd5c97ec1346e051587 Mon Sep 17 00:00:00 2001
From: Stefan Roese <sr@denx.de>
Date: Mon, 15 Oct 2007 11:29:33 +0200
Subject: ppc4xx: Fix incorrect 33/66MHz PCI clock log-message on Sequoia &
 Yosemite

The BCSR status bit for the 66MHz PCI operation was correctly
addressed (MSB/LSB problem). Now the correct currently setup
PCI frequency is displayed upon bootup.

This patch also fixes this problem on Rainier & Yellowstone, since these
boards use the same souce code as Sequoia & Yosemite do.

Signed-off-by: Stefan Roese <sr@denx.de>
---
 include/configs/sequoia.h  | 2 ++
 include/configs/yosemite.h | 2 ++
 2 files changed, 4 insertions(+)

(limited to 'include/configs')

diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h
index c2e1386217..600f98cf0d 100644
--- a/include/configs/sequoia.h
+++ b/include/configs/sequoia.h
@@ -450,6 +450,8 @@
 #define CFG_EBC_PB2AP		0x24814580
 #define CFG_EBC_PB2CR		(CFG_BCSR_BASE | 0x38000)
 
+#define CFG_BCSR5_PCI66EN	0x80
+
 /*-----------------------------------------------------------------------
  * NAND FLASH
  *----------------------------------------------------------------------*/
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index 6a5b7f1eaa..35bce4af90 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -359,6 +359,8 @@
 #define CFG_EBC_PB2AP		0x04814500
 #define CFG_EBC_PB2CR		(CFG_CPLD | 0x18000)
 
+#define CFG_BCSR5_PCI66EN	0x80
+
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-- 
cgit