From 60599ea6cd4a55ea95470d8299e68104d463bfef Mon Sep 17 00:00:00 2001 From: Jaehoon Chung Date: Tue, 16 Jan 2018 15:33:50 +0900 Subject: power: regulator: s2mps11: add a regulator driver for s2mps11 exynos5422 has the s2mps11 PMIC. s2mps11 pmic has the 10-BUCK and 38-LDO regulators. Each IP and devices in exynos5422 can be controlled by each regulators. This patch is support for s2mps11 regulator driver. Signed-off-by: Jaehoon Chung Reviewed-by: Simon Glass Tested-by: Anand Moon --- include/power/s2mps11.h | 55 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 55 insertions(+) (limited to 'include/power/s2mps11.h') diff --git a/include/power/s2mps11.h b/include/power/s2mps11.h index 5da47198a4..22b38fff70 100644 --- a/include/power/s2mps11.h +++ b/include/power/s2mps11.h @@ -106,4 +106,59 @@ enum s2mps11_reg { #define S2MPS11_LDO26_ENABLE 0xec +#define S2MPS11_LDO_NUM 26 +#define S2MPS11_BUCK_NUM 10 + +/* Driver name */ +#define S2MPS11_BUCK_DRIVER "s2mps11_buck" +#define S2MPS11_OF_BUCK_PREFIX "BUCK" +#define S2MPS11_LDO_DRIVER "s2mps11_ldo" +#define S2MPS11_OF_LDO_PREFIX "LDO" + +/* BUCK */ +#define S2MPS11_BUCK_VOLT_MASK 0xff +#define S2MPS11_BUCK9_VOLT_MASK 0x1f + +#define S2MPS11_BUCK_LSTEP 6250 +#define S2MPS11_BUCK_HSTEP 12500 +#define S2MPS11_BUCK9_STEP 25000 + +#define S2MPS11_BUCK_UV_MIN 600000 +#define S2MPS11_BUCK_UV_HMIN 750000 +#define S2MPS11_BUCK9_UV_MIN 1400000 + +#define S2MPS11_BUCK_VOLT_MAX_HEX 0xA0 +#define S2MPS11_BUCK5_VOLT_MAX_HEX 0xDF +#define S2MPS11_BUCK7_8_10_VOLT_MAX_HEX 0xDC +#define S2MPS11_BUCK9_VOLT_MAX_HEX 0x5F + +#define S2MPS11_BUCK_MODE_SHIFT 6 +#define S2MPS11_BUCK_MODE_MASK (0x3) +#define S2MPS11_BUCK_MODE_OFF (0x0 << 6) +#define S2MPS11_BUCK_MODE_STANDBY (0x1 << 6) +#define S2MPS11_BUCK_MODE_ON (0x3 << 6) + +/* LDO */ +#define S2MPS11_LDO_VOLT_MASK 0x3F +#define S2MPS11_LDO_VOLT_MAX_HEX 0x3F + +#define S2MPS11_LDO_STEP 25000 +#define S2MPS11_LDO_UV_MIN 800000 + +#define S2MPS11_LDO_MODE_MASK 0x3 +#define S2MPS11_LDO_MODE_SHIFT 6 + +#define S2MPS11_LDO_MODE_OFF (0x0 << 6) +#define S2MPS11_LDO_MODE_STANDBY (0x1 << 6) +#define S2MPS11_LDO_MODE_STANDBY_LPM (0x2 << 6) +#define S2MPS11_LDO_MODE_ON (0x3 << 6) + +enum { + OP_OFF = 0, + OP_LPM, + OP_STANDBY, + OP_STANDBY_LPM, + OP_ON, +}; + #endif -- cgit