From 00f7bbae92e3b13f2b37aeb1def9bb12445521b7 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 2 Oct 2008 19:17:33 +0400 Subject: mpc83xx: fix PCI scan hang on the standalone MPC837xE-MDS boards The MPC837xE-MDS board's CPLD can auto-detect if the board is on the PIB, standalone or acting as a PCI agent. User's Guide says: - When the CPLD recognizes its location on the PIB it automatically configures RCW to the PCI Host. - If the CPLD fails to recognize its location then it is automatically configured as an Agent and the PCI is configured to an external arbiter. This sounds good. Though in the standalone setup the CPLD sets PCI_HOST flag (it's ok, we can't act as PCI agents since we receive CLKIN, not PCICLK), but the CPLD doesn't set the ARBITER_ENABLE flag, and without any arbiter bad things will happen (here the board hangs during any config space reads). In this situation we must disable the PCI. And in case of anybody really want to use an external arbiter, we provide "pci_external_aribter" environment variable. Signed-off-by: Anton Vorontsov Signed-off-by: Kim Phillips --- include/configs/MPC837XEMDS.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include') diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index e2f0942ce9..c3431ee4cc 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -348,6 +348,9 @@ #define CONFIG_SYS_PCI_SLV_MEM_SIZE 0x80000000 #ifdef CONFIG_PCI +#ifndef __ASSEMBLY__ +extern int board_pci_host_broken(void); +#endif #define CONFIG_83XX_GENERIC_PCI 1 /* Use generic PCI setup */ #define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */ -- cgit