From 55ac719dc780cf0f4bc7d81fcec029b104a30779 Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Tue, 4 Oct 2011 11:13:52 +0200 Subject: ppc4xx: Do not stop booting on any keypress on intip Use CONFIG_AUTOBOOT_KEYED on intip so that booting can only be stopped with well defined keypresses. Signed-off-by: Dirk Eibach Signed-off-by: Stefan Roese --- include/configs/intip.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/configs/intip.h b/include/configs/intip.h index 3ff4a86ab9..931a43f5a8 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -37,10 +37,10 @@ #define CONFIG_460EX 1 /* Specific PPC460EX */ #ifdef CONFIG_DEVCONCENTER #define CONFIG_HOSTNAME devconcenter -#define CONFIG_IDENT_STRING " devconcenter 0.02" +#define CONFIG_IDENT_STRING " devconcenter 0.03" #else #define CONFIG_HOSTNAME intip -#define CONFIG_IDENT_STRING " intip 0.02" +#define CONFIG_IDENT_STRING " intip 0.03" #endif #define CONFIG_440 1 #define CONFIG_4xx 1 /* ... PPC4xx family */ @@ -63,6 +63,10 @@ #define CONFIG_FIT #define CFG_ALT_MEMTEST +#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */ +#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ +#define CONFIG_AUTOBOOT_STOP_STR " " + /* * Base addresses -- Note these are effective addresses where the * actual resources get mapped (not physical addresses) -- cgit From 97ca7b3b8e1d1637d95ed249aa233e669087d701 Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Tue, 4 Oct 2011 11:13:53 +0200 Subject: ppc4xx: Improve lm63 pwm on dlvision-10g Fan PWM lookuptable was modified to start at 46 degrees celsius instead of 40 degrees celsius. Signed-off-by: Dirk Eibach Signed-off-by: Stefan Roese --- include/configs/dlvision-10g.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include') diff --git a/include/configs/dlvision-10g.h b/include/configs/dlvision-10g.h index 4fc5262bc1..146819712d 100644 --- a/include/configs/dlvision-10g.h +++ b/include/configs/dlvision-10g.h @@ -34,7 +34,7 @@ * Include common defines/options for all AMCC eval boards */ #define CONFIG_HOSTNAME dlvsion-10g -#define CONFIG_IDENT_STRING " dlvision-10g 0.01" +#define CONFIG_IDENT_STRING " dlvision-10g 0.02" #include "amcc-common.h" #define CONFIG_BOARD_EARLY_INIT_F /* call board_early_init_f */ @@ -117,8 +117,8 @@ #define CONFIG_DTT_LM63 1 /* National LM63 */ #define CONFIG_DTT_SENSORS { 0x4c, 0x4e } /* Sensor addresses */ #define CONFIG_DTT_PWM_LOOKUPTABLE \ - { { 40, 10 }, { 43, 13 }, { 46, 16 }, \ - { 50, 20 }, { 53, 27 }, { 56, 34 }, { 60, 40 } } + { { 46, 10 }, { 48, 14 }, { 50, 19 }, { 52, 23 },\ + { 54, 27 }, { 56, 31 }, { 58, 36 }, { 60, 40 } } #define CONFIG_DTT_TACH_LIMIT 0xa10 /* EBC peripherals */ -- cgit From 15cc385e681c47851f32fc25c1cd95ab8efbd50c Mon Sep 17 00:00:00 2001 From: Dirk Eibach Date: Tue, 4 Oct 2011 11:13:55 +0200 Subject: ppc4xx: Change DDR2 CL from 4 to 5 for intip Some intip boards don't seem to run stable with CL4, datasheets suggest that CL5 is the safe value. Signed-off-by: Dirk Eibach Signed-off-by: Stefan Roese --- include/configs/intip.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'include') diff --git a/include/configs/intip.h b/include/configs/intip.h index 931a43f5a8..92b65af7c9 100644 --- a/include/configs/intip.h +++ b/include/configs/intip.h @@ -37,10 +37,10 @@ #define CONFIG_460EX 1 /* Specific PPC460EX */ #ifdef CONFIG_DEVCONCENTER #define CONFIG_HOSTNAME devconcenter -#define CONFIG_IDENT_STRING " devconcenter 0.03" +#define CONFIG_IDENT_STRING " devconcenter 0.05" #else #define CONFIG_HOSTNAME intip -#define CONFIG_IDENT_STRING " intip 0.03" +#define CONFIG_IDENT_STRING " intip 0.05" #endif #define CONFIG_440 1 #define CONFIG_4xx 1 /* ... PPC4xx family */ @@ -200,13 +200,13 @@ #define CONFIG_SYS_SDRAM0_INITPLR2 0x81020000 #define CONFIG_SYS_SDRAM0_INITPLR3 0x81030000 #define CONFIG_SYS_SDRAM0_INITPLR4 0x81010002 -#define CONFIG_SYS_SDRAM0_INITPLR5 0xE4000542 +#define CONFIG_SYS_SDRAM0_INITPLR5 0xE4000552 #define CONFIG_SYS_SDRAM0_INITPLR6 0x81900400 #define CONFIG_SYS_SDRAM0_INITPLR7 0x8A880000 #define CONFIG_SYS_SDRAM0_INITPLR8 0x8A880000 #define CONFIG_SYS_SDRAM0_INITPLR9 0x8A880000 #define CONFIG_SYS_SDRAM0_INITPLR10 0x8A880000 -#define CONFIG_SYS_SDRAM0_INITPLR11 0x81000442 +#define CONFIG_SYS_SDRAM0_INITPLR11 0x81000452 #define CONFIG_SYS_SDRAM0_INITPLR12 0x81010382 #define CONFIG_SYS_SDRAM0_INITPLR13 0x81010002 #define CONFIG_SYS_SDRAM0_INITPLR14 0x00000000 @@ -216,11 +216,11 @@ #define CONFIG_SYS_SDRAM0_RDCC 0x40000000 #define CONFIG_SYS_SDRAM0_DLCR 0x00000000 #define CONFIG_SYS_SDRAM0_CLKTR 0x40000000 -#define CONFIG_SYS_SDRAM0_WRDTR 0x84000823 +#define CONFIG_SYS_SDRAM0_WRDTR 0x86000823 #define CONFIG_SYS_SDRAM0_SDTR1 0x80201000 #define CONFIG_SYS_SDRAM0_SDTR2 0x32204232 #define CONFIG_SYS_SDRAM0_SDTR3 0x090C0D15 -#define CONFIG_SYS_SDRAM0_MMODE 0x00000442 +#define CONFIG_SYS_SDRAM0_MMODE 0x00000452 #define CONFIG_SYS_SDRAM0_MEMODE 0x00000002 #define CONFIG_SYS_MBYTES_SDRAM 256 /* 256MB */ -- cgit