From 5522f12b3c5224b19e84a501936830830e00c1ce Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 30 Aug 2015 19:19:02 -0600 Subject: arm: Remove eb_cpu9k2 and eb_cpu9k2_ram boards These board have not been converted to generic board by the deadline. Remove them. Signed-off-by: Simon Glass --- include/configs/eb_cpux9k2.h | 400 ------------------------------------------- 1 file changed, 400 deletions(-) delete mode 100644 include/configs/eb_cpux9k2.h (limited to 'include') diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h deleted file mode 100644 index d27f7e0452..0000000000 --- a/include/configs/eb_cpux9k2.h +++ /dev/null @@ -1,400 +0,0 @@ -/* - * (C) Copyright 2008-2009 - * BuS Elektronik GmbH & Co. KG - * Jens Scharsig - * - * Configuation settings for the EB+CPUx9K2 board. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CONFIG_EB_CPUx9K2_H_ -#define _CONFIG_EB_CPUx9K2_H_ - -/*--------------------------------------------------------------------------*/ - -#define CONFIG_AT91RM9200 /* It's an Atmel AT91RM9200 SoC */ -#define CONFIG_EB_CPUX9K2 /* on an EP+CPUX9K2 Board */ -#define USE_920T_MMU - -#define CONFIG_VERSION_VARIABLE -#define CONFIG_IDENT_STRING " on EB+CPUx9K2" - -#include /* needed for port definitions */ - -#define CONFIG_MISC_INIT_R -#define CONFIG_BOARD_EARLY_INIT_F - -#define MACH_TYPE_EB_CPUX9K2 1977 -#define CONFIG_MACH_TYPE MACH_TYPE_EB_CPUX9K2 - -#define CONFIG_SYS_CACHELINE_SIZE 32 -#define CONFIG_SYS_DCACHE_OFF - -/*--------------------------------------------------------------------------*/ -#ifndef CONFIG_RAMBOOT -#define CONFIG_SYS_TEXT_BASE 0x00000000 -#else -#define CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_SYS_TEXT_BASE 0x21800000 -#endif -#define CONFIG_SYS_LOAD_ADDR 0x21000000 /* default load address */ -#define CONFIG_STANDALONE_LOAD_ADDR 0x21000000 - -#define CONFIG_BOOT_RETRY_TIME 30 -#define CONFIG_CMDLINE_EDITING - -#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ -#define CONFIG_SYS_MAXARGS 32 /* max number of command args */ -#define CONFIG_SYS_PBSIZE \ - (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ - -/* - * ARM asynchronous clock - */ - -#define AT91C_MAIN_CLOCK 179404800 /* from 12.288 MHz * 73 / 5 */ -#define AT91C_MASTER_CLOCK (AT91C_MAIN_CLOCK / 3) -#define CONFIG_SYS_HZ_CLOCK (AT91C_MASTER_CLOCK / 2) - -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock */ - -#define CONFIG_CMDLINE_TAG 1 -#define CONFIG_SETUP_MEMORY_TAGS 1 -#define CONFIG_INITRD_TAG 1 - -#define CONFIG_SYS_USE_MAIN_OSCILLATOR 1 -/* flash */ -#define CONFIG_SYS_EBI_CFGR_VAL 0x00000000 -#define CONFIG_SYS_SMC_CSR0_VAL 0x00003284 /* 16bit, 2 TDF, 4 WS */ - -/* clocks */ -#define CONFIG_SYS_PLLAR_VAL 0x20483E05 /* 179.4048 MHz for PCK */ -#define CONFIG_SYS_PLLBR_VAL 0x104C3E0A /* 47.3088 MHz (for USB) */ -#define CONFIG_SYS_MCKR_VAL 0x00000202 /* PCK/3 = MCK Clock */ - -/* - * Size of malloc() pool - */ - -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - -/* - * sdram - */ - -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_SDRAM_BASE 0x20000000 -#define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 megs */ -#define CONFIG_SYS_INIT_SP_ADDR 0x00204000 /* use internal SRAM */ - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \ - CONFIG_SYS_SDRAM_SIZE - 0x00400000 - \ - CONFIG_SYS_MALLOC_LEN) - -#define CONFIG_SYS_PIOC_ASR_VAL 0xFFFF0000 /* PIOC as D16/D31 */ -#define CONFIG_SYS_PIOC_BSR_VAL 0x00000000 -#define CONFIG_SYS_PIOC_PDR_VAL 0xFFFF0000 -#define CONFIG_SYS_EBI_CSA_VAL 0x00000002 /* CS1=SDRAM */ -#define CONFIG_SYS_SDRC_CR_VAL 0x2188c159 /* set up the SDRAM */ -#define CONFIG_SYS_SDRAM 0x20000000 /* address of the SDRAM */ -#define CONFIG_SYS_SDRAM1 0x20000080 /* address of the SDRAM */ -#define CONFIG_SYS_SDRAM_VAL 0x00000000 /* value written to SDRAM */ -#define CONFIG_SYS_SDRC_MR_VAL 0x00000002 /* Precharge All */ -#define CONFIG_SYS_SDRC_MR_VAL1 0x00000004 /* refresh */ -#define CONFIG_SYS_SDRC_MR_VAL2 0x00000003 /* Load Mode Register */ -#define CONFIG_SYS_SDRC_MR_VAL3 0x00000000 /* Normal Mode */ -#define CONFIG_SYS_SDRC_TR_VAL 0x000002E0 /* Write refresh rate */ - -/* - * Command line configuration - */ -#define CONFIG_CMD_BMP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_I2C -#define CONFIG_CMD_MII -#define CONFIG_CMD_NAND -#define CONFIG_CMD_PING -#define CONFIG_I2C_CMD_TREE -#define CONFIG_CMD_USB -#define CONFIG_CMD_FAT -#define CONFIG_CMD_UBI -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_UBIFS - -#define CONFIG_SYS_LONGHELP - -/* - * MTD defines - */ - -#define CONFIG_FLASH_CFI_MTD -#define CONFIG_MTD_DEVICE -#define CONFIG_MTD_PARTITIONS -#define CONFIG_RBTREE -#define CONFIG_LZO - -#define MTDIDS_DEFAULT "nor0=physmap-flash.0,nand0=atmel_nand" -#define MTDPARTS_DEFAULT "mtdparts=" \ - "physmap-flash.0:" \ - "512k(U-Boot)," \ - "128k(Env)," \ - "128k(Splash)," \ - "4M(Kernel)," \ - "384k(MiniFS)," \ - "-(FS)" \ - ";" \ - "atmel_nand:" \ - "1M(emergency)," \ - "-(data)" -/* - * Hardware drivers - */ -#define CONFIG_USB_ATMEL -#define CONFIG_USB_ATMEL_CLK_SEL_PLLB -#define CONFIG_USB_OHCI_NEW -#define CONFIG_AT91C_PQFP_UHPBUG -#define CONFIG_USB_STORAGE -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION -#define CONFIG_EFI_PARTITION - -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00300000 -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91rm9200" - -/* - * UART/CONSOLE - */ - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_ATMEL_USART -#define CONFIG_USART_BASE ATMEL_BASE_DBGU -#define CONFIG_USART_ID 0/* ignored in arm */ - -/* - * network - */ - -#define CONFIG_NET_RETRY_COUNT 10 -#define CONFIG_RESET_PHY_R 1 - -#define CONFIG_DRIVER_AT91EMAC 1 -#define CONFIG_DRIVER_AT91EMAC_QUIET 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 -#define CONFIG_MII 1 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * I2C-Bus - */ - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ -#define CONFIG_SYS_I2C_SOFT_SPEED 50000 -#define CONFIG_SYS_I2C_SOFT_SLAVE 0 - -/* Software I2C driver configuration */ - -#define AT91_PIN_SDA (1<<25) /* AT91C_PIO_PA25 */ -#define AT91_PIN_SCL (1<<26) /* AT91C_PIO_PA26 */ - -#define CONFIG_SYS_I2C_INIT_BOARD - -#define I2C_INIT i2c_init_board(); -#define I2C_ACTIVE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mddr); -#define I2C_TRISTATE writel(ATMEL_PMX_AA_TWD, &pio->pioa.mder); -#define I2C_READ ((readl(&pio->pioa.pdsr) & ATMEL_PMX_AA_TWD) != 0) -#define I2C_SDA(bit) \ - if (bit) \ - writel(ATMEL_PMX_AA_TWD, &pio->pioa.sodr); \ - else \ - writel(ATMEL_PMX_AA_TWD, &pio->pioa.codr); -#define I2C_SCL(bit) \ - if (bit) \ - writel(ATMEL_PMX_AA_TWCK, &pio->pioa.sodr); \ - else \ - writel(ATMEL_PMX_AA_TWCK, &pio->pioa.codr); - -#define I2C_DELAY udelay(2500000/CONFIG_SYS_I2C_SOFT_SPEED) - -/* I2C-RTC */ - -#ifdef CONFIG_CMD_DATE -#define CONFIG_RTC_DS1338 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 -#endif - -/* EEPROM */ - -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 - -/* FLASH organization */ - -/* NOR-FLASH */ -#define CONFIG_FLASH_SHOW_PROGRESS 45 - -#define CONFIG_FLASH_CFI_DRIVER 1 - -#define PHYS_FLASH_1 0x10000000 -#define PHYS_FLASH_SIZE 0x01000000 /* 16 megs main flash */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -#define CONFIG_SYS_FLASH_PROTECTION 1 -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 512 -#define CONFIG_SYS_FLASH_ERASE_TOUT 6000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 2000 - -/* NAND */ - -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_NAND_DBW_8 1 - -/* Status LED's */ - -#define CONFIG_STATUS_LED 1 -#define CONFIG_BOARD_SPECIFIC_LED 1 - -#define STATUS_LED_BOOT 1 -#define STATUS_LED_ACTIVE 0 - -#define STATUS_LED_BIT 1 /* AT91C_PIO_PD0 green LED */ -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) -#define STATUS_LED_STATE STATUS_LED_OFF /* BLINKING */ -#define STATUS_LED_BIT1 2 /* AT91C_PIO_PD1 red LED */ -#define STATUS_LED_STATE1 STATUS_LED_ON /* BLINKING */ -#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 4) - -#define CONFIG_VIDEO 1 - -/* Options */ - -#ifdef CONFIG_VIDEO - -#define CONFIG_VIDEO_VCXK 1 - -#define CONFIG_SPLASH_SCREEN 1 - -#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 4 -#define CONFIG_SYS_VCXK_BASE 0x30000000 - -#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN (1<<3) -#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT piob -#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR odr - -#define CONFIG_SYS_VCXK_ENABLE_PIN (1<<5) -#define CONFIG_SYS_VCXK_ENABLE_PORT piob -#define CONFIG_SYS_VCXK_ENABLE_DDR oer - -#define CONFIG_SYS_VCXK_REQUEST_PIN (1<<2) -#define CONFIG_SYS_VCXK_REQUEST_PORT piob -#define CONFIG_SYS_VCXK_REQUEST_DDR oer - -#define CONFIG_SYS_VCXK_INVERT_PIN (1<<4) -#define CONFIG_SYS_VCXK_INVERT_PORT piob -#define CONFIG_SYS_VCXK_INVERT_DDR oer - -#define CONFIG_SYS_VCXK_RESET_PIN (1<<6) -#define CONFIG_SYS_VCXK_RESET_PORT piob -#define CONFIG_SYS_VCXK_RESET_DDR oer - -#endif /* CONFIG_VIDEO */ - -/* Environment */ - -#define CONFIG_BOOTDELAY 5 - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x80000) -#define CONFIG_ENV_SIZE 0x20000 /* sectors are 128K here */ - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_BOOTCOMMAND "run nfsboot" - -#define CONFIG_NFSBOOTCOMMAND \ - "dhcp $(copy_addr) uImage_cpux9k2;" \ - "run bootargsdefaults;" \ - "set bootargs $(bootargs) boot=nfs " \ - ";echo $(bootargs)" \ - ";bootm" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "displaywidth=256\0" \ - "displayheight=512\0" \ - "displaybsteps=1023\0" \ - "ubootaddr=10000000\0" \ - "splashimage=100A0000\0" \ - "kerneladdr=100C0000\0" \ - "kernelsize=00400000\0" \ - "rootfsaddr=10520000\0" \ - "copy_addr=21200000\0" \ - "rootfssize=00AE0000\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "bootargsdefaults=set bootargs " \ - "console=ttyS0,115200 " \ - "video=vcxk_fb:xres:${displaywidth}," \ - "yres:${displayheight}," \ - "bres:${displaybsteps} " \ - "mem=62M " \ - "panic=10 " \ - "uboot=\\\"${ver}\\\" " \ - "\0" \ - "update_kernel=protect off $(kerneladdr) +$(kernelsize);" \ - "dhcp $(copy_addr) uImage_cpux9k2;" \ - "erase $(kerneladdr) +$(kernelsize);" \ - "cp.b $(fileaddr) $(kerneladdr) $(filesize);" \ - "protect on $(kerneladdr) +$(kernelsize)" \ - "\0" \ - "update_root=protect off $(rootfsaddr) +$(rootfssize);" \ - "dhcp $(copy_addr) rfs;" \ - "erase $(rootfsaddr) +$(rootfssize);" \ - "cp.b $(fileaddr) $(rootfsaddr) $(filesize);" \ - "\0" \ - "update_uboot=protect off 10000000 1007FFFF;" \ - "dhcp $(copy_addr) u-boot_eb_cpux9k2;" \ - "erase 10000000 1007FFFF;" \ - "cp.b $(fileaddr) $(ubootaddr) $(filesize);" \ - "protect on 10000000 1007FFFF;reset\0" \ - "update_splash=protect off $(splashimage) +20000;" \ - "dhcp $(copy_addr) splash_eb_cpux9k2.bmp;" \ - "erase $(splashimage) +20000;" \ - "cp.b $(fileaddr) $(splashimage) $(filesize);" \ - "protect on $(splashimage) +20000;reset\0" \ - "emergency=run bootargsdefaults;" \ - "set bootargs $(bootargs) root=initramfs boot=emergency " \ - ";bootm $(kerneladdr)\0" \ - "netemergency=run bootargsdefaults;" \ - "dhcp $(copy_addr) uImage_cpux9k2;" \ - "set bootargs $(bootargs) root=initramfs boot=emergency " \ - ";bootm $(copy_addr)\0" \ - "norboot=run bootargsdefaults;" \ - "set bootargs $(bootargs) root=initramfs boot=local " \ - ";bootm $(kerneladdr)\0" \ - "nandboot=run bootargsdefaults;" \ - "set bootargs $(bootargs) root=initramfs boot=nand " \ - ";bootm $(kerneladdr)\0" \ - " " - -/*--------------------------------------------------------------------------*/ - -#endif - -/* EOF */ -- cgit