From 6bbda88384948808dd4050624a6c27d6d63265a1 Mon Sep 17 00:00:00 2001 From: Lucas Stach Date: Sun, 7 Oct 2012 11:36:06 +0000 Subject: tegra: add Colibri T20 board support This adds board support for the Toradex Colibri T20 module. Working functions: - SD card boot - USB boot - Network - NAND environment Signed-off-by: Lucas Stach Signed-off-by: Tom Warren --- include/configs/colibri_t20_iris.h | 83 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100644 include/configs/colibri_t20_iris.h (limited to 'include') diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h new file mode 100644 index 0000000000..0e5f281b25 --- /dev/null +++ b/include/configs/colibri_t20_iris.h @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2012 Lucas Stach + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "tegra20-common.h" + +/* Enable FDT support */ +#define CONFIG_DEFAULT_DEVICE_TREE tegra20-colibri_t20_iris +#define CONFIG_OF_CONTROL +#define CONFIG_OF_SEPARATE + +/* High-level configuration options */ +#define V_PROMPT "Tegra20 (Colibri) # " +#define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T20 on Iris" + +/* Board-specific serial config */ +#define CONFIG_TEGRA_ENABLE_UARTA +#define CONFIG_TEGRA_UARTA_SDIO1 +#define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE + +#define CONFIG_BOARD_EARLY_INIT_F + +/* SD/MMC support */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_TEGRA_MMC +#define CONFIG_CMD_MMC + +/* File system support */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT + +/* USB host support */ +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_TEGRA +#define CONFIG_USB_ULPI +#define CONFIG_USB_ULPI_VIEWPORT +#define CONFIG_USB_STORAGE +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 +#define CONFIG_CMD_USB + +/* USB networking support */ +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_ASIX +#define CONFIG_CMD_NET +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_NFS +#define CONFIG_CMD_PING + +/* NAND support */ +#define CONFIG_CMD_NAND +#define CONFIG_TEGRA_NAND +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */ +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (SZ_2M) +#undef CONFIG_ENV_SIZE /* undef size from tegra20-common.h */ +#define CONFIG_ENV_SIZE (SZ_64K) + +/* Debug commands */ +#define CONFIG_CMD_BDI +#define CONFIG_CMD_CACHE + +#include "tegra-common-post.h" + +#endif /* __CONFIG_H */ -- cgit