From 7ee52af455c2cec7b674d2159806f7e95da8e6a5 Mon Sep 17 00:00:00 2001 From: Alison Wang Date: Fri, 30 Oct 2015 22:45:38 +0800 Subject: ls102xa: Adjust some macros for SD boot on LS1021A QDS board As more features are added for SD boot on LS1021A QDS board, the size of U-Boot is larger. CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS needs to be adjusted to a suitable value. Starting address of the malloc pool used in SPL needs to be adjusted too, or it will occupy the address u-boot loads. Signed-off-by: Alison Wang Reviewed-by: York Sun --- include/configs/ls1021aqds.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include') diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index d19b1e3177..562e78f0a5 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -69,7 +69,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SPL_DRIVERS_MISC_SUPPORT #define CONFIG_SPL_MMC_SUPPORT #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0xe8 -#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x600 #define CONFIG_SPL_TEXT_BASE 0x10000000 #define CONFIG_SPL_MAX_SIZE 0x1a000 @@ -82,7 +82,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 #define CONFIG_SPL_BSS_START_ADDR 0x80100000 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 -#define CONFIG_SYS_MONITOR_LEN 0x80000 +#define CONFIG_SYS_MONITOR_LEN 0xc0000 #endif #ifdef CONFIG_QSPI_BOOT -- cgit