From 98f705c9cefdfdba62c069821bbba10273a0a8ed Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Tue, 27 Jun 2017 16:49:14 +0200 Subject: powerpc: remove 4xx support There was for long time no activity in the 4xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 4xx, so remove it. Signed-off-by: Heiko Schocher --- post/Makefile | 4 - post/board/lwmon5/Makefile | 8 - post/board/lwmon5/dsp.c | 54 ----- post/board/lwmon5/dspic.c | 105 ---------- post/board/lwmon5/fpga.c | 344 ------------------------------- post/board/lwmon5/gdc.c | 363 --------------------------------- post/board/lwmon5/sysmon.c | 277 ------------------------- post/board/lwmon5/watchdog.c | 121 ----------- post/cpu/ppc4xx/Makefile | 16 -- post/cpu/ppc4xx/cache.c | 106 ---------- post/cpu/ppc4xx/cache_4xx.S | 473 ------------------------------------------- post/cpu/ppc4xx/denali_ecc.c | 261 ------------------------ post/cpu/ppc4xx/ether.c | 419 -------------------------------------- post/cpu/ppc4xx/fpu.c | 41 ---- post/cpu/ppc4xx/ocm.c | 73 ------- post/cpu/ppc4xx/spr.c | 184 ----------------- post/cpu/ppc4xx/uart.c | 92 --------- post/cpu/ppc4xx/watchdog.c | 52 ----- post/lib_powerpc/cpu.c | 8 - 19 files changed, 3001 deletions(-) delete mode 100644 post/board/lwmon5/Makefile delete mode 100644 post/board/lwmon5/dsp.c delete mode 100644 post/board/lwmon5/dspic.c delete mode 100644 post/board/lwmon5/fpga.c delete mode 100644 post/board/lwmon5/gdc.c delete mode 100644 post/board/lwmon5/sysmon.c delete mode 100644 post/board/lwmon5/watchdog.c delete mode 100644 post/cpu/ppc4xx/Makefile delete mode 100644 post/cpu/ppc4xx/cache.c delete mode 100644 post/cpu/ppc4xx/cache_4xx.S delete mode 100644 post/cpu/ppc4xx/denali_ecc.c delete mode 100644 post/cpu/ppc4xx/ether.c delete mode 100644 post/cpu/ppc4xx/fpu.c delete mode 100644 post/cpu/ppc4xx/ocm.c delete mode 100644 post/cpu/ppc4xx/spr.c delete mode 100644 post/cpu/ppc4xx/uart.c delete mode 100644 post/cpu/ppc4xx/watchdog.c (limited to 'post') diff --git a/post/Makefile b/post/Makefile index 09bf408f4c..33db359b42 100644 --- a/post/Makefile +++ b/post/Makefile @@ -11,7 +11,3 @@ obj-$(CONFIG_POST_STD_LIST) += tests.o obj-y += drivers/ obj-$(CONFIG_PPC) += lib_powerpc/ obj-$(CONFIG_MPC83xx) += cpu/mpc83xx/ -obj-$(CONFIG_4xx) += cpu/ppc4xx/ -ifneq ($(filter lwmon5 pdm360ng,$(BOARD)),) -obj-y += board/$(BOARD)/ -endif diff --git a/post/board/lwmon5/Makefile b/post/board/lwmon5/Makefile deleted file mode 100644 index 76262c76bc..0000000000 --- a/post/board/lwmon5/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com -# -# Developed for DENX Software Engineering GmbH -# -# SPDX-License-Identifier: GPL-2.0+ - -obj-y += sysmon.o watchdog.o dspic.o fpga.o dsp.o gdc.o diff --git a/post/board/lwmon5/dsp.c b/post/board/lwmon5/dsp.c deleted file mode 100644 index 2f55f01ceb..0000000000 --- a/post/board/lwmon5/dsp.c +++ /dev/null @@ -1,54 +0,0 @@ -/* - * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com - * - * Developed for DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -#include - -#if CONFIG_POST & CONFIG_SYS_POST_DSP -#include - -/* This test verifies DSP status bits in FPGA */ - -DECLARE_GLOBAL_DATA_PTR; - -#define DSP_STATUS_REG 0xC4000008 -#define FPGA_STATUS_REG 0xC400000C - -int dsp_post_test(int flags) -{ - uint old_value; - uint read_value; - int ret; - - /* momorize fpga status */ - old_value = in_be32((void *)FPGA_STATUS_REG); - /* enable outputs */ - out_be32((void *)FPGA_STATUS_REG, 0x30); - - /* generate sync signal */ - out_be32((void *)DSP_STATUS_REG, 0x300); - udelay(5); - out_be32((void *)DSP_STATUS_REG, 0); - udelay(500); - - /* read status */ - ret = 0; - read_value = in_be32((void *)DSP_STATUS_REG) & 0x3; - if (read_value != 0x03) { - post_log("\nDSP status read %08X\n", read_value); - ret = 1; - } - - /* restore fpga status */ - out_be32((void *)FPGA_STATUS_REG, old_value); - - return ret; -} - -#endif /* CONFIG_POST & CONFIG_SYS_POST_DSP */ diff --git a/post/board/lwmon5/dspic.c b/post/board/lwmon5/dspic.c deleted file mode 100644 index c5ed190227..0000000000 --- a/post/board/lwmon5/dspic.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com - * - * Developed for DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -/* There are two tests for dsPIC currently implemented: - * 1. dsPIC ready test. Done in board_early_init_f(). Only result verified here. - * 2. dsPIC POST result test. This test gets dsPIC POST codes and version. - */ - -#include - -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#define DSPIC_POST_ERROR_REG 0x800 -#define DSPIC_SYS_ERROR_REG 0x802 -#define DSPIC_SYS_VERSION_REG 0x804 -#define DSPIC_FW_VERSION_REG 0x808 - -#if CONFIG_POST & CONFIG_SYS_POST_BSPEC1 - -/* Verify that dsPIC ready test done early at hw init passed ok */ -int dspic_init_post_test(int flags) -{ - if (in_be32((void *)CONFIG_SYS_DSPIC_TEST_ADDR) & - CONFIG_SYS_DSPIC_TEST_MASK) { - post_log("dsPIC init test failed\n"); - return 1; - } - - return 0; -} - -#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC1 */ - -#if CONFIG_POST & CONFIG_SYS_POST_BSPEC2 -/* Read a register from the dsPIC. */ -int dspic_read(ushort reg, ushort *data) -{ - uchar buf[sizeof(*data)]; - int rval; - - if (i2c_read(CONFIG_SYS_I2C_DSPIC_IO_ADDR, reg, 2, buf, 2)) - return -1; - rval = i2c_read(CONFIG_SYS_I2C_DSPIC_IO_ADDR, reg, sizeof(reg), - buf, sizeof(*data)); - *data = (buf[0] << 8) | buf[1]; - - return rval; -} - -/* Verify error codes regs, display version */ -int dspic_post_test(int flags) -{ - ushort data; - int ret = 0; - - post_log("\n"); - - /* read dspic FW-Version */ - if (dspic_read(DSPIC_FW_VERSION_REG, &data)) { - post_log("dsPIC: failed read FW-Version\n"); - ret = 1; - } else { - post_log("dsPIC FW-Version: %u.%u\n", - (data >> 8) & 0xFF, data & 0xFF); - } - - /* read dspic SYS-Version */ - if (dspic_read(DSPIC_SYS_VERSION_REG, &data)) { - post_log("dsPIC: failed read version\n"); - ret = 1; - } else { - post_log("dsPIC SYS-Version: %u.%u\n", - (data >> 8) & 0xFF, data & 0xFF); - } - - /* read dspic POST error code */ - if (dspic_read(DSPIC_POST_ERROR_REG, &data)) { - post_log("dsPIC: failed read POST code\n"); - ret = 1; - } else { - post_log("dsPIC POST-ERROR code: 0x%04X\n", data); - } - - /* read dspic SYS error code */ - if ((data = dspic_read(DSPIC_SYS_ERROR_REG, &data))) { - post_log("dsPIC: failed read system error\n"); - ret = 1; - } else { - post_log("dsPIC SYS-ERROR code: 0x%04X\n", data); - } - - return ret; -} - -#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC2 */ diff --git a/post/board/lwmon5/fpga.c b/post/board/lwmon5/fpga.c deleted file mode 100644 index 1a72823968..0000000000 --- a/post/board/lwmon5/fpga.c +++ /dev/null @@ -1,344 +0,0 @@ -/* - * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com - * - * Developed for DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include - -/* This test performs testing of FPGA SCRATCH register, - * gets FPGA version and run get_ram_size() on FPGA memory - */ - -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#define FPGA_SCRATCH_REG 0xC4000050 -#define FPGA_VERSION_REG 0xC4000040 -#define FPGA_RAM_START 0xC4200000 -#define FPGA_RAM_END 0xC4203FFF -#define FPGA_STAT 0xC400000C -#define FPGA_BUFFER 0x00800000 -#define FPGA_RAM_SIZE (FPGA_RAM_END - FPGA_RAM_START + 1) - -#if CONFIG_POST & CONFIG_SYS_POST_BSPEC3 - -const static unsigned long pattern[] = { - 0xffffffff, - 0xaaaaaaaa, - 0xcccccccc, - 0xf0f0f0f0, - 0xff00ff00, - 0xffff0000, - 0x0000ffff, - 0x00ff00ff, - 0x0f0f0f0f, - 0x33333333, - 0x55555555, - 0x00000000, -}; - -const static unsigned long otherpattern = 0x01234567; - -static int one_scratch_test(uint value) -{ - uint read_value; - int ret = 0; - - out_be32((void *)FPGA_SCRATCH_REG, value); - /* read other location (protect against data lines capacity) */ - ret = in_be16((void *)FPGA_VERSION_REG); - /* verify test pattern */ - read_value = in_be32((void *)FPGA_SCRATCH_REG); - if (read_value != value) { - post_log("FPGA SCRATCH test failed write %08X, read %08X\n", - value, read_value); - ret = -1; - } - - return ret; -} - -static int fpga_post_test1(ulong *start, ulong size, ulong val) -{ - int ret = 0; - ulong i = 0; - ulong *mem = start; - ulong readback; - - for (i = 0; i < size / sizeof(ulong); i++) { - mem[i] = val; - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - for (i = 0; i < size / sizeof(ulong); i++) { - readback = mem[i]; - if (readback != val) { - post_log("FPGA Memory error at %08x, " - "wrote %08x, read %08x !\n", - mem + i, val, readback); - ret = -1; - break; - } - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - return ret; -} - -static int fpga_post_test2(ulong *start, ulong size) -{ - int ret = 0; - ulong i = 0; - ulong *mem = start; - ulong readback; - - for (i = 0; i < size / sizeof(ulong); i++) { - mem[i] = 1 << (i % 32); - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - for (i = 0; i < size / sizeof(ulong); i++) { - readback = mem[i]; - if (readback != 1 << (i % 32)) { - post_log("FPGA Memory error at %08x, " - "wrote %08x, read %08x !\n", - mem + i, 1 << (i % 32), readback); - ret = -1; - break; - } - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - return ret; -} - -static int fpga_post_test3(ulong *start, ulong size) -{ - int ret = 0; - ulong i = 0; - ulong *mem = start; - ulong readback; - - for (i = 0; i < size / sizeof(ulong); i++) { - mem[i] = i; - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - for (i = 0; i < size / sizeof(ulong); i++) { - readback = mem[i]; - if (readback != i) { - post_log("FPGA Memory error at %08x, " - "wrote %08x, read %08x !\n", - mem + i, i, readback); - ret = -1; - break; - } - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - return ret; -} - -static int fpga_post_test4(ulong *start, ulong size) -{ - int ret = 0; - ulong i = 0; - ulong *mem = start; - ulong readback; - - for (i = 0; i < size / sizeof(ulong); i++) { - mem[i] = ~i; - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - for (i = 0; i < size / sizeof(ulong); i++) { - readback = mem[i]; - if (readback != ~i) { - post_log("FPGA Memory error at %08x, " - "wrote %08x, read %08x !\n", - mem + i, ~i, readback); - ret = -1; - break; - } - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - return ret; -} - -/* FPGA Memory-pattern-test */ -static int fpga_mem_test(void) -{ - int ret = 0; - ulong* start = (ulong *)FPGA_RAM_START; - ulong size = FPGA_RAM_SIZE; - - if (ret == 0) - ret = fpga_post_test1(start, size, 0x00000000); - - if (ret == 0) - ret = fpga_post_test1(start, size, 0xffffffff); - - if (ret == 0) - ret = fpga_post_test1(start, size, 0x55555555); - - if (ret == 0) - ret = fpga_post_test1(start, size, 0xaaaaaaaa); - - WATCHDOG_RESET(); - - if (ret == 0) - ret = fpga_post_test2(start, size); - - if (ret == 0) - ret = fpga_post_test3(start, size); - - if (ret == 0) - ret = fpga_post_test4(start, size); - - return ret; -} - -/* Verify FPGA addresslines */ -static int fpga_post_addrline(ulong *address, ulong *base, ulong size) -{ - unsigned long *target; - unsigned long *end; - unsigned long readback; - unsigned long xor; - int ret = 0; - - end = (ulong *)((ulong)base + size); - xor = 0; - - for (xor = sizeof(ulong); xor > 0; xor <<= 1) { - target = (ulong*)((ulong)address ^ xor); - if ((target >= base) && (target < end)) { - *address = ~*target; - readback = *target; - - if (readback == *address) { - post_log("Memory (address line) error at %08x" - "XOR value %08x !\n", - address, target, xor); - ret = -1; - break; - } - } - } - - return ret; -} - -/* Verify FPGA addresslines */ -static int fpga_post_dataline(ulong *address) -{ - unsigned long temp32 = 0; - int i = 0; - int ret = 0; - - for (i = 0; i < ARRAY_SIZE(pattern); i++) { - *address = pattern[i]; - /* - * Put a different pattern on the data lines: otherwise they - * may float long enough to read back what we wrote. - */ - *(address + 1) = otherpattern; - temp32 = *address; - - if (temp32 != pattern[i]){ - post_log("Memory (date line) error at %08x, " - "wrote %08x, read %08x !\n", - address, pattern[i], temp32); - ret = 1; - } - } - - return ret; -} - -/* Verify FPGA, get version & memory size */ -int fpga_post_test(int flags) -{ - uint old_value; - uint version; - uint read_value; - int ret = 0; - - post_log("\n"); - old_value = in_be32((void *)FPGA_SCRATCH_REG); - - if (one_scratch_test(0x55555555)) - ret = 1; - if (one_scratch_test(0xAAAAAAAA)) - ret = 1; - - out_be32((void *)FPGA_SCRATCH_REG, old_value); - - version = in_be32((void *)FPGA_VERSION_REG); - post_log("FPGA version %u.%u\n", - (version >> 8) & 0xFF, version & 0xFF); - - /* Enable write to FPGA RAM */ - out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) | 0x1000); - - /* get RAM size */ - read_value = get_ram_size((void *)CONFIG_SYS_FPGA_BASE_1, FPGA_RAM_SIZE); - post_log("FPGA RAM size %d bytes\n", read_value); - WATCHDOG_RESET(); - - /* copy fpga memory to DDR2 RAM*/ - memcpy((void *)FPGA_BUFFER,(void *)FPGA_RAM_START, FPGA_RAM_SIZE); - WATCHDOG_RESET(); - - /* Test datalines */ - if (fpga_post_dataline((ulong *)FPGA_RAM_START)) { - ret = 1; - goto out; - } - WATCHDOG_RESET(); - - /* Test addresslines */ - if (fpga_post_addrline((ulong *)FPGA_RAM_START, - (ulong *)FPGA_RAM_START, FPGA_RAM_SIZE)) { - ret = 1; - goto out; - } - WATCHDOG_RESET(); - if (fpga_post_addrline((ulong *)FPGA_RAM_END - sizeof(long), - (ulong *)FPGA_RAM_START, FPGA_RAM_SIZE)) { - ret = 1; - goto out; - } - WATCHDOG_RESET(); - - /* Memory Pattern Test */ - if (fpga_mem_test()) { - ret = 1; - goto out; - } - WATCHDOG_RESET(); - - /* restore memory */ - memcpy((void *)FPGA_RAM_START,(void *)FPGA_BUFFER, FPGA_RAM_SIZE); - WATCHDOG_RESET(); - -out: - /* Disable write to RAM */ - out_be32((void *)FPGA_STAT, in_be32((void *)FPGA_STAT) & 0xEFFF); - return ret; -} - -#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC3 */ diff --git a/post/board/lwmon5/gdc.c b/post/board/lwmon5/gdc.c deleted file mode 100644 index 9405e7d9ab..0000000000 --- a/post/board/lwmon5/gdc.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com - * - * Developed for DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include - -/* This test attempts to verify board GDC. A scratch register tested, then - * simple memory test (get_ram_size()) run over GDC memory. - */ - -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#define GDC_SCRATCH_REG 0xC1FF8044 -#define GDC_VERSION_REG 0xC1FF8084 -#define GDC_HOST_BASE 0xC1FC0000 -#define GDC_RAM_START 0xC0000000 -#define GDC_RAM_END (GDC_HOST_BASE - 1) -#define GDC_RAM_SIZE (GDC_RAM_END - GDC_RAM_START) - -#if CONFIG_POST & CONFIG_SYS_POST_BSPEC4 - -const static unsigned long pattern[] = { - 0xffffffff, - 0xaaaaaaaa, - 0xcccccccc, - 0xf0f0f0f0, - 0xff00ff00, - 0xffff0000, - 0x0000ffff, - 0x00ff00ff, - 0x0f0f0f0f, - 0x33333333, - 0x55555555, - 0x00000000 -}; - -const static unsigned long otherpattern = 0x01234567; - -/* test write/read og a given LIME Register */ -static int gdc_test_reg_one(uint value) -{ - uint read_value; - - /* write test pattern */ - out_be32((void *)GDC_SCRATCH_REG, value); - /* read other location (protect against data lines capacity) */ - in_be32((void *)GDC_RAM_START); - /* verify test pattern */ - read_value = in_be32((void *)GDC_SCRATCH_REG); - if (read_value != value) { - post_log("GDC SCRATCH test failed write %08X, read %08X\n", - value, read_value); - } - - return (read_value != value); -} - -/* test with a given static 32 bit pattern in a given memory addressrange */ -static int gdc_post_test1(ulong *start, ulong size, ulong val) -{ - int ret = 0; - ulong i = 0; - ulong *mem = start; - ulong readback; - - for (i = 0; i < size / sizeof(ulong); i++) { - mem[i] = val; - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - for (i = 0; i < size / sizeof(ulong); i++) { - readback = mem[i]; - if (readback != val) { - post_log("GDC Memory error at %08x, " - "wrote %08x, read %08x !\n", - mem + i, val, readback); - ret = -1; - break; - } - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - return ret; -} - -/* test with dynamic 32 bit pattern in a given memory addressrange */ -static int gdc_post_test2(ulong *start, ulong size) -{ - int ret = 0; - ulong i = 0; - ulong *mem = start; - ulong readback; - - for (i = 0; i < size / sizeof(ulong); i++) { - mem[i] = 1 << (i % 32); - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - for (i = 0; i < size / sizeof(ulong); i++) { - readback = mem[i]; - if (readback != 1 << (i % 32)) { - post_log("GDC Memory error at %08x, " - "wrote %08x, read %08x !\n", - mem + i, 1 << (i % 32), readback); - ret = -1; - break; - } - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - return ret; -} - -/* test with dynamic 32 bit pattern in a given memory addressrange */ -static int gdc_post_test3(ulong *start, ulong size) -{ - int ret = 0; - ulong i = 0; - ulong *mem = start; - ulong readback; - - for (i = 0; i < size / sizeof(ulong); i++) { - mem[i] = i; - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - for (i = 0; i < size / sizeof(ulong); i++) { - readback = mem[i]; - if (readback != i) { - post_log("GDC Memory error at %08x, " - "wrote %08x, read %08x !\n", - mem + i, i, readback); - ret = -1; - break; - } - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - return ret; -} - -/* test with dynamic 32 bit pattern in a given memory addressrange */ -static int gdc_post_test4(ulong *start, ulong size) -{ - int ret = 0; - ulong i = 0; - ulong *mem = start; - ulong readback; - - for (i = 0; i < size / sizeof(ulong); i++) { - mem[i] = ~i; - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - for (i = 0; i < size / sizeof(ulong); i++) { - readback = mem[i]; - if (readback != ~i) { - post_log("GDC Memory error at %08x, " - "wrote %08x, read %08x !\n", - mem + i, ~i, readback); - ret = -1; - break; - } - if (i % 1024 == 0) - WATCHDOG_RESET(); - } - - return ret; -} - -/* do some patterntests in a given addressrange */ -int gdc_mem_test(ulong *start, ulong size) -{ - int ret = 0; - - /* - * check addressrange and do different static and dynamic - * pattern tests with it. - */ - if (((void *)start) + size <= (void *)GDC_RAM_END) { - if (ret == 0) - ret = gdc_post_test1(start, size, 0x00000000); - - if (ret == 0) - ret = gdc_post_test1(start, size, 0xffffffff); - - if (ret == 0) - ret = gdc_post_test1(start, size, 0x55555555); - - if (ret == 0) - ret = gdc_post_test1(start, size, 0xaaaaaaaa); - - if (ret == 0) - ret = gdc_post_test2(start, size); - - if (ret == 0) - ret = gdc_post_test3(start, size); - - if (ret == 0) - ret = gdc_post_test4(start, size); - } - - return ret; -} - -/* test function of gdc memory addresslines*/ -static int gdc_post_addrline(ulong *address, ulong *base, ulong size) -{ - ulong *target; - ulong *end; - ulong readback = 0; - ulong xor = 0; - int ret = 0; - - end = (ulong *)((ulong)base + size); - - for (xor = sizeof(long); xor > 0; xor <<= 1) { - target = (ulong *)((ulong)address ^ xor); - if ((target >= base) && (target < end)) { - *address = ~*target; - readback = *target; - } - - if (readback == *address) { - post_log("GDC Memory (address line) error at %08x" - "XOR value %08x !\n", - address, target , xor); - ret = -1; - break; - } - } - - return ret; -} - -static int gdc_post_dataline(ulong *address) -{ - unsigned long temp32 = 0; - int i = 0; - int ret = 0; - - for (i = 0; i < ARRAY_SIZE(pattern); i++) { - *address = pattern[i]; - /* - * Put a different pattern on the data lines: otherwise they - * may float long enough to read back what we wrote. - */ - *(address + 1) = otherpattern; - temp32 = *address; - - if (temp32 != pattern[i]){ - post_log("GDC Memory (date line) error at %08x, " - "wrote %08x, read %08x !\n", - address, pattern[i], temp32); - ret = 1; - } - } - - return ret; -} - -/* Verify GDC, get memory size, verify GDC memory */ -int gdc_post_test(int flags) -{ - uint old_value; - int i = 0; - int ret = 0; - - post_log("\n"); - old_value = in_be32((void *)GDC_SCRATCH_REG); - - /* - * GPIOC2 register behaviour: the LIME graphics processor has a - * maximum of 5 GPIO ports that can be used in this hardware - * configuration. Thus only the bits for these 5 GPIOs can be - * activated in the GPIOC2 register. All other bits will always be - * read as zero. - */ - if (gdc_test_reg_one(0x00150015)) - ret = 1; - if (gdc_test_reg_one(0x000A000A)) - ret = 1; - - out_be32((void *)GDC_SCRATCH_REG, old_value); - - old_value = in_be32((void *)GDC_VERSION_REG); - post_log("GDC chip version %u.%u, year %04X\n", - (old_value >> 8) & 0xFF, old_value & 0xFF, - (old_value >> 16) & 0xFFFF); - - old_value = get_ram_size((void *)GDC_RAM_START, - 0x02000000); - - debug("GDC RAM size (ist): %d bytes\n", old_value); - debug("GDC RAM size (soll): %d bytes\n", GDC_RAM_SIZE); - post_log("GDC RAM size: %d bytes\n", old_value); - - /* Test SDRAM datalines */ - if (gdc_post_dataline((ulong *)GDC_RAM_START)) { - ret = 1; - goto out; - } - WATCHDOG_RESET(); - - /* Test SDRAM adresslines */ - if (gdc_post_addrline((ulong *)GDC_RAM_START, - (ulong *)GDC_RAM_START, GDC_RAM_SIZE)) { - ret = 1; - goto out; - } - WATCHDOG_RESET(); - if (gdc_post_addrline((ulong *)GDC_RAM_END - sizeof(long), - (ulong *)GDC_RAM_START, GDC_RAM_SIZE)) { - ret = 1; - goto out; - } - WATCHDOG_RESET(); - - /* memory pattern test */ - debug("GDC Memory test (flags %8x:%8x)\n", flags, - POST_SLOWTEST | POST_MANUAL); - - if (flags & POST_MANUAL) { - debug("Full memory test\n"); - if (gdc_mem_test((ulong *)GDC_RAM_START, GDC_RAM_SIZE)) { - ret = 1; - goto out; - } - /* load splashscreen again */ - } else { - debug("smart memory test\n"); - for (i = 0; i < (GDC_RAM_SIZE >> 20) && ret == 0; i++) { - if (ret == 0) - ret = gdc_mem_test((ulong *)(GDC_RAM_START + - (i << 20)), - 0x800); - if (ret == 0) - ret = gdc_mem_test((ulong *)(GDC_RAM_START + - (i << 20) + 0xff800), - 0x800); - } - } - WATCHDOG_RESET(); - -out: - return ret; -} -#endif /* CONFIG_POST & CONFIG_SYS_POST_BSPEC4 */ diff --git a/post/board/lwmon5/sysmon.c b/post/board/lwmon5/sysmon.c deleted file mode 100644 index cca1a26235..0000000000 --- a/post/board/lwmon5/sysmon.c +++ /dev/null @@ -1,277 +0,0 @@ -/* - * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com - * - * Developed for DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -/* - * SYSMON test - * - * This test performs the system hardware monitoring. - * The test passes when all the following voltages and temperatures - * are within allowed ranges: - * - * Temperature -40 .. +90 C - * +5V +4.50 .. +5.50 V - * +5V standby +3.50 .. +5.50 V - * - * LCD backlight is not enabled if temperature values are not within - * allowed ranges (-30 .. + 80). The brightness of backlite can be - * controlled by setting "brightness" environment variable. Default value is 50% - * - * See the list of all parameters in the sysmon_table below - */ - -#include -#include -#include - -#if defined(CONFIG_VIDEO) -#include -#endif - -#if CONFIG_POST & CONFIG_SYS_POST_SYSMON - -DECLARE_GLOBAL_DATA_PTR; - -/* from dspic.c */ -extern int dspic_read(ushort reg, ushort *data); - -#define REG_TEMPERATURE 0x12BC -#define REG_VOLTAGE_5V 0x12CA -#define REG_VOLTAGE_5V_STANDBY 0x12C6 - -#define TEMPERATURE_MIN (-40) /* degr. C */ -#define TEMPERATURE_MAX (+90) /* degr. C */ -#define TEMPERATURE_DISPLAY_MIN (-35) /* degr. C */ -#define TEMPERATURE_DISPLAY_MAX (+85) /* degr. C */ - -#define VOLTAGE_5V_MIN (+4500) /* mV */ -#define VOLTAGE_5V_MAX (+5500) /* mV */ - -#define VOLTAGE_5V_STANDBY_MIN (+3500) /* mV */ -#define VOLTAGE_5V_STANDBY_MAX (+5500) /* mV */ - -typedef struct sysmon_s sysmon_t; -typedef struct sysmon_table_s sysmon_table_t; - -static void sysmon_dspic_init(sysmon_t *this); -static int sysmon_dspic_read(sysmon_t *this, uint addr, int *val); -static int sysmon_dspic_read_sgn(sysmon_t *this, uint addr, int *val); -static void sysmon_backlight_disable(sysmon_table_t *this); - -struct sysmon_s { - uchar chip; - void (*init)(sysmon_t *); - int (*read)(sysmon_t *, uint, int *); -}; - -static sysmon_t sysmon_dspic = { - CONFIG_SYS_I2C_DSPIC_IO_ADDR, - sysmon_dspic_init, - sysmon_dspic_read -}; - -static sysmon_t sysmon_dspic_sgn = { - CONFIG_SYS_I2C_DSPIC_IO_ADDR, - sysmon_dspic_init, - sysmon_dspic_read_sgn -}; - -static sysmon_t *sysmon_list[] = { - &sysmon_dspic, - NULL -}; - -struct sysmon_table_s { - char *name; - char *unit_name; - sysmon_t *sysmon; - void (*exec_before)(sysmon_table_t *); - void (*exec_after)(sysmon_table_t *); - - int unit_precision; - int unit_div; - int unit_min; - int unit_max; - uint val_mask; - uint val_min; - uint val_max; - int val_valid; - uint val_min_alt; - uint val_max_alt; - int val_valid_alt; - uint addr; -}; - -static sysmon_table_t sysmon_table[] = { - { - "Temperature", " C", &sysmon_dspic, NULL, sysmon_backlight_disable, - 1, 1, -32768, 32767, 0xFFFF, - 0x8000 + TEMPERATURE_MIN, 0x8000 + TEMPERATURE_MAX, 0, - 0x8000 + TEMPERATURE_DISPLAY_MIN, 0x8000 + TEMPERATURE_DISPLAY_MAX, 0, - REG_TEMPERATURE, - }, - - { - "+ 5 V", "V", &sysmon_dspic, NULL, NULL, - 100, 1000, -0x8000, 0x7FFF, 0xFFFF, - 0x8000 + VOLTAGE_5V_MIN, 0x8000 + VOLTAGE_5V_MAX, 0, - 0x8000 + VOLTAGE_5V_MIN, 0x8000 + VOLTAGE_5V_MAX, 0, - REG_VOLTAGE_5V, - }, - - { - "+ 5 V standby", "V", &sysmon_dspic, NULL, NULL, - 100, 1000, -0x8000, 0x7FFF, 0xFFFF, - 0x8000 + VOLTAGE_5V_STANDBY_MIN, 0x8000 + VOLTAGE_5V_STANDBY_MAX, 0, - 0x8000 + VOLTAGE_5V_STANDBY_MIN, 0x8000 + VOLTAGE_5V_STANDBY_MAX, 0, - REG_VOLTAGE_5V_STANDBY, - }, - - { - "Temperature", "°C", &sysmon_dspic_sgn, NULL, sysmon_backlight_disable, - 1, 1, -32768, 32767, 0xFFFF, - 0x8000 + TEMPERATURE_MIN, 0x8000 + TEMPERATURE_MAX, 0, - 0x8000 + TEMPERATURE_DISPLAY_MIN, 0x8000 + TEMPERATURE_DISPLAY_MAX, 0, - REG_TEMPERATURE, - }, -}; - -int sysmon_init_f(void) -{ - sysmon_t **l; - - for (l = sysmon_list; *l; l++) - (*l)->init(*l); - - return 0; -} - -void sysmon_reloc(void) -{ - /* Do nothing for now, sysmon_reloc() is required by the sysmon post */ -} - -static char *sysmon_unit_value(sysmon_table_t *s, uint val) -{ - static char buf[32]; - char *p, sign; - int decimal, frac; - int unit_val; - - unit_val = s->unit_min + (s->unit_max - s->unit_min) * val / s->val_mask; - - if (val == -1) - return "I/O ERROR"; - - if (unit_val < 0) { - sign = '-'; - unit_val = -unit_val; - } else { - sign = '+'; - } - - p = buf + sprintf(buf, "%c%2d", sign, unit_val / s->unit_div); - - frac = unit_val % s->unit_div; - frac /= (s->unit_div / s->unit_precision); - - decimal = s->unit_precision; - - if (decimal != 1) - *p++ = '.'; - for (decimal /= 10; decimal != 0; decimal /= 10) - *p++ = '0' + (frac / decimal) % 10; - strcpy(p, s->unit_name); - - return buf; -} - -static void sysmon_dspic_init(sysmon_t *this) -{ -} - -static int sysmon_dspic_read(sysmon_t *this, uint addr, int *val) -{ - ushort data; - - if (dspic_read(addr, &data) == 0){ - /* To fit into the table range we should add 0x8000 */ - *val = data + 0x8000; - return 0; - } - - return -1; -} - -static int sysmon_dspic_read_sgn(sysmon_t *this, uint addr, int *val) -{ - ushort data; - - if (dspic_read(addr, &data) == 0){ - /* To fit into the table range we should add 0x8000 */ - *val = (signed short)data + 0x8000; - return 0; - } - - return -1; -} - -static void sysmon_backlight_disable(sysmon_table_t *this) -{ -#if defined(CONFIG_VIDEO) - board_backlight_switch(this->val_valid_alt); -#endif -} - -int sysmon_post_test(int flags) -{ - int res = 0; - sysmon_table_t * t; - int val; - - for (t = sysmon_table; t < sysmon_table + ARRAY_SIZE(sysmon_table); t++) { - t->val_valid = 1; - if (t->exec_before) - t->exec_before(t); - - if (t->sysmon->read(t->sysmon, t->addr, &val) != 0) { - t->val_valid = 0; - t->val_valid_alt = 0; - post_log(": read failed\n"); - res = 1; - break; - } - - if (t->val_valid != 0) { - t->val_valid = val >= t->val_min && val <= t->val_max; - t->val_valid_alt = val >= t->val_min_alt && val <= t->val_max_alt; - } - - if (t->exec_after) - t->exec_after(t); - - if ((!t->val_valid) || (flags)) { - post_log("\n\t%-17s = %-10s ", t->name, sysmon_unit_value(t, val)); - post_log("allowed range"); - post_log(" %-8s ..", sysmon_unit_value(t, t->val_min)); - post_log(" %-8s", sysmon_unit_value(t, t->val_max)); - post_log(" %s", t->val_valid ? "OK" : "FAIL"); - } - - if (!t->val_valid) { - res = 1; - break; - } - } - post_log("\n"); - - return res; -} -#endif /* CONFIG_POST & CONFIG_SYS_POST_SYSMON */ diff --git a/post/board/lwmon5/watchdog.c b/post/board/lwmon5/watchdog.c deleted file mode 100644 index 1332da21d0..0000000000 --- a/post/board/lwmon5/watchdog.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * (C) Copyright 2008 Dmitry Rakhchev, EmCraft Systems, rda@emcraft.com - * - * Developed for DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -/* This test verifies if the reason of last reset was an abnormal voltage - * condition, than it performs watchdog test, measuing time required to - * trigger watchdog reset. - */ - -#include - -#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG - -#include -#include -#include - -static uint watchdog_magic_read(void) -{ - return in_be32((void *)CONFIG_SYS_WATCHDOG_FLAGS_ADDR) & - CONFIG_SYS_WATCHDOG_MAGIC_MASK; -} - -static void watchdog_magic_write(uint value) -{ - out_be32((void *)CONFIG_SYS_WATCHDOG_FLAGS_ADDR, value | - (in_be32((void *)CONFIG_SYS_WATCHDOG_FLAGS_ADDR) & - ~CONFIG_SYS_WATCHDOG_MAGIC_MASK)); -} - -int sysmon1_post_test(int flags) -{ - if (gpio_read_in_bit(CONFIG_SYS_GPIO_SYSMON_STATUS) == 0) { - /* - * 3.1. GPIO62 is low - * Assuming system voltage failure. - */ - post_log("sysmon1 Abnormal voltage detected (GPIO62)\n"); - post_log("POST sysmon1 FAILED\n"); - return 1; - } else { - post_log("sysmon1 PASSED\n"); - } - - return 0; -} - -int lwmon5_watchdog_post_test(int flags) -{ - /* On each reset scratch register 1 should be tested, - * but first test GPIO62: - */ - if (!(flags & POST_MANUAL) && sysmon1_post_test(flags)) { - /* 3.1. GPIO62 is low - * Assuming system voltage failure. - */ - /* 3.1.1. Set scratch register 1 to 0x0000xxxx */ - watchdog_magic_write(0); - /* 3.1.2. Mark test as failed due to voltage?! */ - return 1; - } - - if (watchdog_magic_read() != CONFIG_SYS_WATCHDOG_MAGIC) { - /* 3.2. Scratch register 1 differs from magic value 0x1248xxxx - * Assuming PowerOn - */ - int ints; - ulong base; - ulong time; - - /* 3.2.1. Set magic value to scratch register */ - watchdog_magic_write(CONFIG_SYS_WATCHDOG_MAGIC); - - ints = disable_interrupts (); - /* 3.2.2. strobe watchdog once */ - WATCHDOG_RESET(); - out_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR, 0); - /* 3.2.3. save time of strobe in scratch register 2 */ - base = post_time_ms (0); - - /* 3.2.4. Wait for 150 ms (enough for reset to happen) */ - while ((time = post_time_ms (base)) < 150) - out_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR, time); - if (ints) - enable_interrupts (); - - /* 3.2.5. Reset didn't happen. - Set 0x0000xxxx - * into scratch register 1 - */ - watchdog_magic_write(0); - /* 3.2.6. Mark test as failed. */ - post_log("hw watchdog time : %u ms, failed ", time); - return 2; - } else { - /* 3.3. Scratch register matches magic value 0x1248xxxx - * Assume this is watchdog-initiated reset - */ - ulong time; - /* 3.3.1. So, the test succeed, save measured time to syslog. */ - time = in_be32((void *)CONFIG_SYS_WATCHDOG_TIME_ADDR); - if (time > 90 ) { /* ms*/ - post_log("hw watchdog time : %u ms, passed ", time); - /* 3.3.2. Set scratch register 1 to 0x0000xxxx */ - watchdog_magic_write(0); - return 0; - } else { - /*test minimum watchdogtime */ - post_log("hw watchdog time : %u ms, failed ", time); - return 2; - } - } - return -1; -} - -#endif /* CONFIG_POST & CONFIG_SYS_POST_WATCHDOG */ diff --git a/post/cpu/ppc4xx/Makefile b/post/cpu/ppc4xx/Makefile deleted file mode 100644 index e9ec286c7c..0000000000 --- a/post/cpu/ppc4xx/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2002-2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += cache_4xx.o -obj-y += cache.o -obj-y += denali_ecc.o -obj-y += ether.o -obj-y += fpu.o -obj-y += ocm.o -obj-y += spr.o -obj-y += uart.o -obj-y += watchdog.o diff --git a/post/cpu/ppc4xx/cache.c b/post/cpu/ppc4xx/cache.c deleted file mode 100644 index e5ea5335e3..0000000000 --- a/post/cpu/ppc4xx/cache.c +++ /dev/null @@ -1,106 +0,0 @@ -/* - * (C) Copyright 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Author: Igor Lisitsin - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -/* Cache test - * - * This test verifies the CPU data and instruction cache using - * several test scenarios. - */ - -#include - -#if CONFIG_POST & CONFIG_SYS_POST_CACHE - -#include -#include - -#define CACHE_POST_SIZE 1024 - -int cache_post_test1 (int tlb, void *p, int size); -int cache_post_test2 (int tlb, void *p, int size); -int cache_post_test3 (int tlb, void *p, int size); -int cache_post_test4 (int tlb, void *p, int size); -int cache_post_test5 (int tlb, void *p, int size); -int cache_post_test6 (int tlb, void *p, int size); - -#ifdef CONFIG_440 -static unsigned char testarea[CACHE_POST_SIZE] -__attribute__((__aligned__(CACHE_POST_SIZE))); -#endif - -int cache_post_test (int flags) -{ - void *virt = (void *)CONFIG_SYS_POST_CACHE_ADDR; - int ints; - int res = 0; - int tlb = -1; /* index to the victim TLB entry */ - - /* - * All 44x variants deal with cache management differently - * because they have the address translation always enabled. - * The 40x ppc's don't use address translation in U-Boot at all, - * so we have to distinguish here between 40x and 44x. - */ -#ifdef CONFIG_440 - int word0, i; - - /* - * Allocate a new TLB entry, since we are going to modify - * the write-through and caching inhibited storage attributes. - */ - program_tlb((u32)testarea, (u32)virt, CACHE_POST_SIZE, - TLB_WORD2_I_ENABLE); - - /* Find the TLB entry */ - for (i = 0;; i++) { - if (i >= PPC4XX_TLB_SIZE) { - printf ("Failed to program tlb entry\n"); - return -1; - } - word0 = mftlb1(i); - if (TLB_WORD0_EPN_DECODE(word0) == (u32)virt) { - tlb = i; - break; - } - } -#endif - ints = disable_interrupts (); - - WATCHDOG_RESET (); - if (res == 0) - res = cache_post_test1 (tlb, virt, CACHE_POST_SIZE); - WATCHDOG_RESET (); - if (res == 0) - res = cache_post_test2 (tlb, virt, CACHE_POST_SIZE); - WATCHDOG_RESET (); - if (res == 0) - res = cache_post_test3 (tlb, virt, CACHE_POST_SIZE); - WATCHDOG_RESET (); - if (res == 0) - res = cache_post_test4 (tlb, virt, CACHE_POST_SIZE); - WATCHDOG_RESET (); - if (res == 0) - res = cache_post_test5 (tlb, virt, CACHE_POST_SIZE); - WATCHDOG_RESET (); - if (res == 0) - res = cache_post_test6 (tlb, virt, CACHE_POST_SIZE); - - if (ints) - enable_interrupts (); - -#ifdef CONFIG_440 - remove_tlb((u32)virt, CACHE_POST_SIZE); -#endif - - return res; -} - -#endif /* CONFIG_POST & CONFIG_SYS_POST_CACHE */ diff --git a/post/cpu/ppc4xx/cache_4xx.S b/post/cpu/ppc4xx/cache_4xx.S deleted file mode 100644 index 15a133cfa8..0000000000 --- a/post/cpu/ppc4xx/cache_4xx.S +++ /dev/null @@ -1,473 +0,0 @@ -/* - * (C) Copyright 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Author: Igor Lisitsin - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -#include -#include -#include -#include -#include - -#if CONFIG_POST & CONFIG_SYS_POST_CACHE - - .text - - /* - * All 44x variants deal with cache management differently - * because they have the address translation always enabled. - * The 40x ppc's don't use address translation in U-Boot at all, - * so we have to distinguish here between 40x and 44x. - */ -#ifdef CONFIG_440 -/* void cache_post_disable (int tlb) - */ -cache_post_disable: - tlbre r0, r3, 0x0002 - ori r0, r0, TLB_WORD2_I_ENABLE@l - tlbwe r0, r3, 0x0002 - sync - isync - blr - -/* void cache_post_wt (int tlb) - */ -cache_post_wt: - tlbre r0, r3, 0x0002 - ori r0, r0, TLB_WORD2_W_ENABLE@l - andi. r0, r0, ~TLB_WORD2_I_ENABLE@l - tlbwe r0, r3, 0x0002 - sync - isync - blr - -/* void cache_post_wb (int tlb) - */ -cache_post_wb: - tlbre r0, r3, 0x0002 - andi. r0, r0, ~TLB_WORD2_W_ENABLE@l - andi. r0, r0, ~TLB_WORD2_I_ENABLE@l - tlbwe r0, r3, 0x0002 - sync - isync - blr -#else -/* void cache_post_disable (int tlb) - */ -cache_post_disable: - lis r0, 0x0000 - ori r0, r0, 0x0000 - mtdccr r0 - sync - isync - blr - -/* void cache_post_wt (int tlb) - */ -cache_post_wt: - lis r0, 0x8000 - ori r0, r0, 0x0000 - mtdccr r0 - lis r0, 0x8000 - ori r0, r0, 0x0000 - mtdcwr r0 - sync - isync - blr - -/* void cache_post_wb (int tlb) - */ -cache_post_wb: - lis r0, 0x8000 - ori r0, r0, 0x0000 - mtdccr r0 - lis r0, 0x0000 - ori r0, r0, 0x0000 - mtdcwr r0 - sync - isync - blr -#endif - -/* void cache_post_dinvalidate (void *p, int size) - */ -cache_post_dinvalidate: - dcbi r0, r3 - addi r3, r3, CONFIG_SYS_CACHELINE_SIZE - subic. r4, r4, CONFIG_SYS_CACHELINE_SIZE - bgt cache_post_dinvalidate - sync - blr - -/* void cache_post_dstore (void *p, int size) - */ -cache_post_dstore: - dcbst r0, r3 - addi r3, r3, CONFIG_SYS_CACHELINE_SIZE - subic. r4, r4, CONFIG_SYS_CACHELINE_SIZE - bgt cache_post_dstore - sync - blr - -/* void cache_post_dtouch (void *p, int size) - */ -cache_post_dtouch: - dcbt r0, r3 - addi r3, r3, CONFIG_SYS_CACHELINE_SIZE - subic. r4, r4, CONFIG_SYS_CACHELINE_SIZE - bgt cache_post_dtouch - sync - blr - -/* void cache_post_iinvalidate (void) - */ -cache_post_iinvalidate: - iccci r0, r0 - sync - blr - -/* void cache_post_memset (void *p, int val, int size) - */ -cache_post_memset: - mtctr r5 -1: - stb r4, 0(r3) - addi r3, r3, 1 - bdnz 1b - blr - -/* int cache_post_check (void *p, int size) - */ -cache_post_check: - mtctr r4 -1: - lbz r0, 0(r3) - addi r3, r3, 1 - cmpwi r0, 0xff - bne 2f - bdnz 1b - li r3, 0 - blr -2: - li r3, -1 - blr - -#define CACHE_POST_DISABLE() \ - mr r3, r10; \ - bl cache_post_disable - -#define CACHE_POST_WT() \ - mr r3, r10; \ - bl cache_post_wt - -#define CACHE_POST_WB() \ - mr r3, r10; \ - bl cache_post_wb - -#define CACHE_POST_DINVALIDATE() \ - mr r3, r11; \ - mr r4, r12; \ - bl cache_post_dinvalidate - -#define CACHE_POST_DFLUSH() \ - mr r3, r11; \ - mr r4, r12; \ - bl cache_post_dflush - -#define CACHE_POST_DSTORE() \ - mr r3, r11; \ - mr r4, r12; \ - bl cache_post_dstore - -#define CACHE_POST_DTOUCH() \ - mr r3, r11; \ - mr r4, r12; \ - bl cache_post_dtouch - -#define CACHE_POST_IINVALIDATE() \ - bl cache_post_iinvalidate - -#define CACHE_POST_MEMSET(val) \ - mr r3, r11; \ - li r4, val; \ - mr r5, r12; \ - bl cache_post_memset - -#define CACHE_POST_CHECK() \ - mr r3, r11; \ - mr r4, r12; \ - bl cache_post_check; \ - mr r13, r3 - -/* - * Write and read 0xff pattern with caching enabled. - */ - .global cache_post_test1 -cache_post_test1: - mflr r9 - mr r10, r3 /* tlb */ - mr r11, r4 /* p */ - mr r12, r5 /* size */ - - CACHE_POST_WB() - CACHE_POST_DINVALIDATE() - - /* Write the negative pattern to the test area */ - CACHE_POST_MEMSET(0xff) - - /* Read the test area */ - CACHE_POST_CHECK() - - CACHE_POST_DINVALIDATE() - CACHE_POST_DISABLE() - - mr r3, r13 - mtlr r9 - blr - -/* - * Write zeroes with caching enabled. - * Write 0xff pattern with caching disabled. - * Read 0xff pattern with caching enabled. - */ - .global cache_post_test2 -cache_post_test2: - mflr r9 - mr r10, r3 /* tlb */ - mr r11, r4 /* p */ - mr r12, r5 /* size */ - - CACHE_POST_WB() - CACHE_POST_DINVALIDATE() - - /* Write the zero pattern to the test area */ - CACHE_POST_MEMSET(0) - - CACHE_POST_DINVALIDATE() - CACHE_POST_DISABLE() - - /* Write the negative pattern to the test area */ - CACHE_POST_MEMSET(0xff) - - CACHE_POST_WB() - - /* Read the test area */ - CACHE_POST_CHECK() - - CACHE_POST_DINVALIDATE() - CACHE_POST_DISABLE() - - mr r3, r13 - mtlr r9 - blr - -/* - * Write-through mode test. - * Write zeroes, store the cache, write 0xff pattern. - * Invalidate the cache. - * Check that 0xff pattern is read. - */ - .global cache_post_test3 -cache_post_test3: - mflr r9 - mr r10, r3 /* tlb */ - mr r11, r4 /* p */ - mr r12, r5 /* size */ - - CACHE_POST_WT() - CACHE_POST_DINVALIDATE() - - /* Cache the test area */ - CACHE_POST_DTOUCH() - - /* Write the zero pattern to the test area */ - CACHE_POST_MEMSET(0) - - CACHE_POST_DSTORE() - - /* Write the negative pattern to the test area */ - CACHE_POST_MEMSET(0xff) - - CACHE_POST_DINVALIDATE() - CACHE_POST_DISABLE() - - /* Read the test area */ - CACHE_POST_CHECK() - - mr r3, r13 - mtlr r9 - blr - -/* - * Write-back mode test. - * Write 0xff pattern, store the cache, write zeroes. - * Invalidate the cache. - * Check that 0xff pattern is read. - */ - .global cache_post_test4 -cache_post_test4: - mflr r9 - mr r10, r3 /* tlb */ - mr r11, r4 /* p */ - mr r12, r5 /* size */ - - CACHE_POST_WB() - CACHE_POST_DINVALIDATE() - - /* Cache the test area */ - CACHE_POST_DTOUCH() - - /* Write the negative pattern to the test area */ - CACHE_POST_MEMSET(0xff) - - CACHE_POST_DSTORE() - - /* Write the zero pattern to the test area */ - CACHE_POST_MEMSET(0) - - CACHE_POST_DINVALIDATE() - CACHE_POST_DISABLE() - - /* Read the test area */ - CACHE_POST_CHECK() - - mr r3, r13 - mtlr r9 - blr - -/* - * Load the test instructions into the instruction cache. - * Replace the test instructions. - * Check that the original instructions are executed. - */ - .global cache_post_test5 -cache_post_test5: - mflr r9 - mr r10, r3 /* tlb */ - mr r11, r4 /* p */ - mr r12, r5 /* size */ - - CACHE_POST_WT() - CACHE_POST_IINVALIDATE() - - /* Compute r13 = cache_post_test_inst */ - bl cache_post_test5_reloc -cache_post_test5_reloc: - mflr r13 - lis r0, (cache_post_test_inst - cache_post_test5_reloc)@h - ori r0, r0, (cache_post_test_inst - cache_post_test5_reloc)@l - add r13, r13, r0 - - /* Copy the test instructions to the test area */ - lwz r0, 0(r13) - stw r0, 0(r11) - lwz r0, 8(r13) - stw r0, 4(r11) - sync - - /* Invalidate the cache line */ - icbi r0, r11 - sync - isync - - /* Execute the test instructions */ - mtlr r11 - blrl - - /* Replace the test instruction */ - lwz r0, 4(r13) - stw r0, 0(r11) - sync - - /* Do not invalidate the cache line */ - isync - - /* Execute the test instructions */ - mtlr r11 - blrl - mr r13, r3 - - CACHE_POST_IINVALIDATE() - CACHE_POST_DINVALIDATE() - CACHE_POST_DISABLE() - - mr r3, r13 - mtlr r9 - blr - -/* - * Load the test instructions into the instruction cache. - * Replace the test instructions and invalidate the cache. - * Check that the replaced instructions are executed. - */ - .global cache_post_test6 -cache_post_test6: - mflr r9 - mr r10, r3 /* tlb */ - mr r11, r4 /* p */ - mr r12, r5 /* size */ - - CACHE_POST_WT() - CACHE_POST_IINVALIDATE() - - /* Compute r13 = cache_post_test_inst */ - bl cache_post_test6_reloc -cache_post_test6_reloc: - mflr r13 - lis r0, (cache_post_test_inst - cache_post_test6_reloc)@h - ori r0, r0, (cache_post_test_inst - cache_post_test6_reloc)@l - add r13, r13, r0 - - /* Copy the test instructions to the test area */ - lwz r0, 4(r13) - stw r0, 0(r11) - lwz r0, 8(r13) - stw r0, 4(r11) - sync - - /* Invalidate the cache line */ - icbi r0, r11 - sync - isync - - /* Execute the test instructions */ - mtlr r11 - blrl - - /* Replace the test instruction */ - lwz r0, 0(r13) - stw r0, 0(r11) - sync - - /* Invalidate the cache line */ - icbi r0, r11 - sync - isync - - /* Execute the test instructions */ - mtlr r11 - blrl - mr r13, r3 - - CACHE_POST_IINVALIDATE() - CACHE_POST_DINVALIDATE() - CACHE_POST_DISABLE() - - mr r3, r13 - mtlr r9 - blr - -/* Test instructions. - */ -cache_post_test_inst: - li r3, 0 - li r3, -1 - blr - -#endif /* CONFIG_POST & CONFIG_SYS_POST_CACHE */ diff --git a/post/cpu/ppc4xx/denali_ecc.c b/post/cpu/ppc4xx/denali_ecc.c deleted file mode 100644 index ad5e64fbb0..0000000000 --- a/post/cpu/ppc4xx/denali_ecc.c +++ /dev/null @@ -1,261 +0,0 @@ -/* - * (C) Copyright 2007 - * Developed for DENX Software Engineering GmbH. - * - * Author: Pavel Kolesnikov - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* define DEBUG for debugging output (obviously ;-)) */ -#if 0 -#define DEBUG -#endif - -#include -#include - -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) - -#include - -#if CONFIG_POST & CONFIG_SYS_POST_ECC - -/* - * MEMORY ECC test - * - * This test performs the checks ECC facility of memory. - */ -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(DEBUG) -const static uint8_t syndrome_codes[] = { - 0xF4, 0XF1, 0XEC, 0XEA, 0XE9, 0XE6, 0XE5, 0XE3, - 0XDC, 0XDA, 0XD9, 0XD6, 0XD5, 0XD3, 0XCE, 0XCB, - 0xB5, 0XB0, 0XAD, 0XAB, 0XA8, 0XA7, 0XA4, 0XA2, - 0X9D, 0X9B, 0X98, 0X97, 0X94, 0X92, 0X8F, 0X8A, - 0x75, 0x70, 0X6D, 0X6B, 0X68, 0X67, 0X64, 0X62, - 0X5E, 0X5B, 0X58, 0X57, 0X54, 0X52, 0X4F, 0X4A, - 0x34, 0x31, 0X2C, 0X2A, 0X29, 0X26, 0X25, 0X23, - 0X1C, 0X1A, 0X19, 0X16, 0X15, 0X13, 0X0E, 0X0B, - 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01 -}; -#endif - -#define ECC_START_ADDR 0x10 -#define ECC_STOP_ADDR 0x2000 -#define ECC_PATTERN 0x01010101 -#define ECC_PATTERN_CORR 0x11010101 -#define ECC_PATTERN_UNCORR 0x61010101 - -inline static void disable_ecc(void) -{ - uint32_t value; - - sync(); /* Wait for any pending memory accesses to complete. */ - mfsdram(DDR0_22, value); - mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK) - | DDR0_22_CTRL_RAW_ECC_DISABLE); -} - -inline static void clear_and_enable_ecc(void) -{ - uint32_t value; - - sync(); /* Wait for any pending memory accesses to complete. */ - mfsdram(DDR0_00, value); - mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL); - mfsdram(DDR0_22, value); - mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK) - | DDR0_22_CTRL_RAW_ECC_ENABLE); -} - -static uint32_t get_ecc_status(void) -{ - uint32_t int_status; -#if defined(DEBUG) - uint8_t syndrome; - uint32_t hdata, ldata, haddr, laddr; - uint32_t value; -#endif - - mfsdram(DDR0_00, int_status); - int_status &= DDR0_00_INT_STATUS_MASK; - -#if defined(DEBUG) - if (int_status & (DDR0_00_INT_STATUS_BIT0 | DDR0_00_INT_STATUS_BIT1)) { - mfsdram(DDR0_32, laddr); - mfsdram(DDR0_33, haddr); - haddr &= 0x00000001; - if (int_status & DDR0_00_INT_STATUS_BIT1) - debug("Multiple accesses"); - else - debug("A single access"); - - debug(" outside the defined physical memory space detected\n" - " addr = 0x%01x%08x\n", haddr, laddr); - } - if (int_status & (DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT3)) { - unsigned int bit; - - mfsdram(DDR0_23, value); - syndrome = (value >> 16) & 0xff; - for (bit = 0; bit < sizeof(syndrome_codes); bit++) - if (syndrome_codes[bit] == syndrome) - break; - - mfsdram(DDR0_38, laddr); - mfsdram(DDR0_39, haddr); - haddr &= 0x00000001; - mfsdram(DDR0_40, ldata); - mfsdram(DDR0_41, hdata); - if (int_status & DDR0_00_INT_STATUS_BIT3) - debug("Multiple correctable ECC events"); - else - debug("Single correctable ECC event"); - - debug(" detected\n 0x%01x%08x - 0x%08x%08x, bit - %d\n", - haddr, laddr, hdata, ldata, bit); - } - if (int_status & (DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT5)) { - mfsdram(DDR0_23, value); - syndrome = (value >> 8) & 0xff; - mfsdram(DDR0_34, laddr); - mfsdram(DDR0_35, haddr); - haddr &= 0x00000001; - mfsdram(DDR0_36, ldata); - mfsdram(DDR0_37, hdata); - if (int_status & DDR0_00_INT_STATUS_BIT5) - debug("Multiple uncorrectable ECC events"); - else - debug("Single uncorrectable ECC event"); - - debug(" detected\n 0x%01x%08x - 0x%08x%08x, " - "syndrome - 0x%02x\n", - haddr, laddr, hdata, ldata, syndrome); - } - if (int_status & DDR0_00_INT_STATUS_BIT6) - debug("DRAM initialization complete\n"); -#endif /* defined(DEBUG) */ - - return int_status; -} - -static int test_ecc(uint32_t ecc_addr) -{ - uint32_t value; - volatile uint32_t *const ecc_mem = (volatile uint32_t *)ecc_addr; - int ret = 0; - - WATCHDOG_RESET(); - - debug("Entering test_ecc(0x%08x)\n", ecc_addr); - /* Set up correct ECC in memory */ - disable_ecc(); - clear_and_enable_ecc(); - out_be32(ecc_mem, ECC_PATTERN); - out_be32(ecc_mem + 1, ECC_PATTERN); - ppcDcbf((u32)ecc_mem); - - /* Verify no ECC error reading back */ - value = in_be32(ecc_mem); - disable_ecc(); - if (ECC_PATTERN != value) { - debug("Data read error (no-error case): " - "expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value); - ret = 1; - } - value = get_ecc_status(); - if (0x00000000 != value) { - /* Expected no ECC status reported */ - debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n", - 0x00000000, value); - ret = 1; - } - - /* Test for correctable error by creating a one-bit error */ - out_be32(ecc_mem, ECC_PATTERN_CORR); - ppcDcbf((u32)ecc_mem); - clear_and_enable_ecc(); - value = in_be32(ecc_mem); - disable_ecc(); - /* Test that the corrected data was read */ - if (ECC_PATTERN != value) { - debug("Data read error (correctable-error case): " - "expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value); - ret = 1; - } - value = get_ecc_status(); - if ((DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT7) != value) { - /* Expected a single correctable error reported */ - debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n", - DDR0_00_INT_STATUS_BIT2, value); - ret = 1; - } - - /* Test for uncorrectable error by creating a two-bit error */ - out_be32(ecc_mem, ECC_PATTERN_UNCORR); - ppcDcbf((u32)ecc_mem); - clear_and_enable_ecc(); - value = in_be32(ecc_mem); - disable_ecc(); - /* Test that the corrected data was read */ - if (ECC_PATTERN_UNCORR != value) { - debug("Data read error (uncorrectable-error case): " - "expected 0x%08x, read 0x%08x\n", ECC_PATTERN_UNCORR, - value); - ret = 1; - } - value = get_ecc_status(); - if ((DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT7) != value) { - /* Expected a single uncorrectable error reported */ - debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n", - DDR0_00_INT_STATUS_BIT4, value); - ret = 1; - } - - /* Remove error from SDRAM and enable ECC. */ - out_be32(ecc_mem, ECC_PATTERN); - ppcDcbf((u32)ecc_mem); - clear_and_enable_ecc(); - - return ret; -} - -int ecc_post_test(int flags) -{ - int ret = 0; - uint32_t value; - uint32_t iaddr; - - mfsdram(DDR0_22, value); - if (0x3 != DDR0_22_CTRL_RAW_DECODE(value)) { - debug("SDRAM ECC not enabled, skipping ECC POST.\n"); - return 0; - } - - /* Mask all interrupts. */ - mfsdram(DDR0_01, value); - mtsdram(DDR0_01, (value & ~DDR0_01_INT_MASK_MASK) - | DDR0_01_INT_MASK_ALL_OFF); - - for (iaddr = ECC_START_ADDR; iaddr <= ECC_STOP_ADDR; iaddr += iaddr) { - ret = test_ecc(iaddr); - if (ret) - break; - } - /* - * Clear possible errors resulting from ECC testing. (If not done, we - * we could get an interrupt later on when exceptions are enabled.) - */ - set_mcsr(get_mcsr()); - debug("ecc_post_test() returning %d\n", ret); - return ret; -} -#endif /* CONFIG_POST & CONFIG_SYS_POST_ECC */ -#endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */ diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c deleted file mode 100644 index 8a4c56b7d6..0000000000 --- a/post/cpu/ppc4xx/ether.c +++ /dev/null @@ -1,419 +0,0 @@ -/* - * (C) Copyright 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Author: Igor Lisitsin - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -/* - * Ethernet test - * - * The Ethernet Media Access Controllers (EMAC) are tested in the - * internal loopback mode. - * The controllers are configured accordingly and several packets - * are transmitted. The configurable test parameters are: - * MIN_PACKET_LENGTH - minimum size of packet to transmit - * MAX_PACKET_LENGTH - maximum size of packet to transmit - * CONFIG_SYS_POST_ETH_LOOPS - Number of test loops. Each loop - * is tested with a different frame length. Starting with - * MAX_PACKET_LENGTH and going down to MIN_PACKET_LENGTH. - * Defaults to 10 and can be overridden in the board config header. - */ - -#include - -#if CONFIG_POST & CONFIG_SYS_POST_ETHER - -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Get count of EMAC devices (doesn't have to be the max. possible number - * supported by the cpu) - * - * CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the - * EMAC count is possible. As it is needed for the Kilauea/Haleakala - * 405EX/405EXr eval board, using the same binary. - */ -#if defined(CONFIG_BOARD_EMAC_COUNT) -#define LAST_EMAC_NUM board_emac_count() -#else /* CONFIG_BOARD_EMAC_COUNT */ -#if defined(CONFIG_HAS_ETH3) -#define LAST_EMAC_NUM 4 -#elif defined(CONFIG_HAS_ETH2) -#define LAST_EMAC_NUM 3 -#elif defined(CONFIG_HAS_ETH1) -#define LAST_EMAC_NUM 2 -#else -#define LAST_EMAC_NUM 1 -#endif -#endif /* CONFIG_BOARD_EMAC_COUNT */ - -#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) -#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1)) -#endif - -#define MIN_PACKET_LENGTH 64 -#define MAX_PACKET_LENGTH 1514 -#ifndef CONFIG_SYS_POST_ETH_LOOPS -#define CONFIG_SYS_POST_ETH_LOOPS 10 -#endif -#define PACKET_INCR ((MAX_PACKET_LENGTH - MIN_PACKET_LENGTH) / \ - CONFIG_SYS_POST_ETH_LOOPS) - -static volatile mal_desc_t tx __cacheline_aligned; -static volatile mal_desc_t rx __cacheline_aligned; -static char *tx_buf; -static char *rx_buf; - -int board_emac_count(void); - -static void ether_post_init (int devnum, int hw_addr) -{ - int i; -#if defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_440SP) || defined(CONFIG_440SPE) - unsigned mode_reg; - sys_info_t sysinfo; -#endif -#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE) - unsigned long mfr; -#endif - -#if defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_440SP) || defined(CONFIG_440SPE) - /* Need to get the OPB frequency so we can access the PHY */ - get_sys_info (&sysinfo); -#endif - -#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) - /* provide clocks for EMAC internal loopback */ - mfsdr (SDR0_MFR, mfr); - mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum); - mtsdr (SDR0_MFR, mfr); - sync (); -#endif - /* reset emac */ - out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_SRST); - sync (); - - for (i = 0;; i++) { - if (!(in_be32 ((void*)(EMAC0_MR0 + hw_addr)) & EMAC_MR0_SRST)) - break; - if (i >= 1000) { - printf ("Timeout resetting EMAC\n"); - break; - } - udelay (1000); - } -#if defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_440SP) || defined(CONFIG_440SPE) - /* Whack the M1 register */ - mode_reg = 0x0; - if (sysinfo.freqOPB <= 50000000); - else if (sysinfo.freqOPB <= 66666667) - mode_reg |= EMAC_MR1_OBCI_66; - else if (sysinfo.freqOPB <= 83333333) - mode_reg |= EMAC_MR1_OBCI_83; - else if (sysinfo.freqOPB <= 100000000) - mode_reg |= EMAC_MR1_OBCI_100; - else - mode_reg |= EMAC_MR1_OBCI_GT100; - - out_be32 ((void*)(EMAC0_MR1 + hw_addr), mode_reg); - -#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ - - /* set the Mal configuration reg */ -#if defined(CONFIG_440GX) || \ - defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ - defined(CONFIG_440SP) || defined(CONFIG_440SPE) - mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | - MAL_CR_PLBLT_DEFAULT | 0x00330000); -#else - mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT); - /* Errata 1.12: MAL_1 -- Disable MAL bursting */ - if (get_pvr() == PVR_440GP_RB) { - mtdcr (MAL0_CFG, mfdcr(MAL0_CFG) & ~MAL_CR_PLBB); - } -#endif - /* setup buffer descriptors */ - tx.ctrl = MAL_TX_CTRL_WRAP; - tx.data_len = 0; - tx.data_ptr = (char*)L1_CACHE_ALIGN((u32)tx_buf); - - rx.ctrl = MAL_TX_CTRL_WRAP | MAL_RX_CTRL_EMPTY; - rx.data_len = 0; - rx.data_ptr = (char*)L1_CACHE_ALIGN((u32)rx_buf); - flush_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t)); - flush_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t)); - - switch (devnum) { - case 1: - /* setup MAL tx & rx channel pointers */ -#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR) - mtdcr (MAL0_TXCTP2R, &tx); -#else - mtdcr (MAL0_TXCTP1R, &tx); -#endif -#if defined(CONFIG_440) - mtdcr (MAL0_TXBADDR, 0x0); - mtdcr (MAL0_RXBADDR, 0x0); -#endif - mtdcr (MAL0_RXCTP1R, &rx); - /* set RX buffer size */ - mtdcr (MAL0_RCBS1, PKTSIZE_ALIGN / 16); - break; - case 0: - default: - /* setup MAL tx & rx channel pointers */ -#if defined(CONFIG_440) - mtdcr (MAL0_TXBADDR, 0x0); - mtdcr (MAL0_RXBADDR, 0x0); -#endif - mtdcr (MAL0_TXCTP0R, &tx); - mtdcr (MAL0_RXCTP0R, &rx); - /* set RX buffer size */ - mtdcr (MAL0_RCBS0, PKTSIZE_ALIGN / 16); - break; - } - - /* Enable MAL transmit and receive channels */ -#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> (devnum*2))); -#else - mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> devnum)); -#endif - mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> devnum)); - - /* set internal loopback mode */ -#ifdef CONFIG_SYS_POST_ETHER_EXT_LOOPBACK - out_be32 ((void*)(EMAC0_MR1 + hw_addr), EMAC_MR1_FDE | 0 | - EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K | - EMAC_MR1_MF_100MBPS | EMAC_MR1_IST | - in_be32 ((void*)(EMAC0_MR1 + hw_addr))); -#else - out_be32 ((void*)(EMAC0_MR1 + hw_addr), EMAC_MR1_FDE | EMAC_MR1_ILE | - EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K | - EMAC_MR1_MF_100MBPS | EMAC_MR1_IST | - in_be32 ((void*)(EMAC0_MR1 + hw_addr))); -#endif - - /* set transmit enable & receive enable */ - out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_TXE | EMAC_MR0_RXE); - - /* enable broadcast address */ - out_be32 ((void*)(EMAC0_RXM + hw_addr), EMAC_RMR_BAE); - - /* set transmit request threshold register */ - out_be32 ((void*)(EMAC0_TRTR + hw_addr), 0x18000000); /* 256 byte threshold */ - - /* set receive low/high water mark register */ -#if defined(CONFIG_440) - /* 440s has a 64 byte burst length */ - out_be32 ((void*)(EMAC0_RX_HI_LO_WMARK + hw_addr), 0x80009000); -#else - /* 405s have a 16 byte burst length */ - out_be32 ((void*)(EMAC0_RX_HI_LO_WMARK + hw_addr), 0x0f002000); -#endif /* defined(CONFIG_440) */ - out_be32 ((void*)(EMAC0_TMR1 + hw_addr), 0xf8640000); - - /* Set fifo limit entry in tx mode 0 */ - out_be32 ((void*)(EMAC0_TMR0 + hw_addr), 0x00000003); - /* Frame gap set */ - out_be32 ((void*)(EMAC0_I_FRAME_GAP_REG + hw_addr), 0x00000008); - sync (); -} - -static void ether_post_halt (int devnum, int hw_addr) -{ - int i = 0; -#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) - unsigned long mfr; -#endif - - /* 1st reset MAL channel */ - /* Note: writing a 0 to a channel has no effect */ -#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> (devnum * 2)); -#else - mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> devnum); -#endif - mtdcr (MAL0_RXCARR, MAL_TXRX_CASR >> devnum); - - /* wait for reset */ - while (mfdcr (MAL0_RXCASR) & (MAL_TXRX_CASR >> devnum)) { - if (i++ >= 1000) - break; - udelay (1000); - } - /* emac reset */ - out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_SRST); - -#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) - /* remove clocks for EMAC internal loopback */ - mfsdr (SDR0_MFR, mfr); - mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum); - mtsdr (SDR0_MFR, mfr); -#endif -} - -static void ether_post_send (int devnum, int hw_addr, void *packet, int length) -{ - int i = 0; - - while (tx.ctrl & MAL_TX_CTRL_READY) { - if (i++ > 100) { - printf ("TX timeout\n"); - return; - } - udelay (1000); - invalidate_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t)); - } - tx.ctrl = MAL_TX_CTRL_READY | MAL_TX_CTRL_WRAP | MAL_TX_CTRL_LAST | - EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP; - tx.data_len = length; - memcpy (tx.data_ptr, packet, length); - flush_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t)); - flush_dcache_range((u32)tx.data_ptr, (u32)tx.data_ptr + length); - sync (); - - out_be32 ((void*)(EMAC0_TMR0 + hw_addr), in_be32 ((void*)(EMAC0_TMR0 + hw_addr)) | EMAC_TMR0_GNP0); - sync (); -} - -static int ether_post_recv (int devnum, int hw_addr, void *packet, int max_length) -{ - int length; - int i = 0; - - while (rx.ctrl & MAL_RX_CTRL_EMPTY) { - if (i++ > 100) { - printf ("RX timeout\n"); - return 0; - } - udelay (1000); - invalidate_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t)); - } - length = rx.data_len - 4; - if (length <= max_length) { - invalidate_dcache_range((u32)rx.data_ptr, (u32)rx.data_ptr + length); - memcpy(packet, rx.data_ptr, length); - } - sync (); - - rx.ctrl |= MAL_RX_CTRL_EMPTY; - flush_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t)); - sync (); - - return length; -} - - /* - * Test routines - */ - -static void packet_fill (char *packet, int length) -{ - char c = (char) length; - int i; - - /* set up ethernet header */ - memset (packet, 0xff, 14); - - for (i = 14; i < length; i++) { - packet[i] = c++; - } -} - -static int packet_check (char *packet, int length) -{ - char c = (char) length; - int i; - - for (i = 14; i < length; i++) { - if (packet[i] != c++) - return -1; - } - - return 0; -} - - char packet_send[MAX_PACKET_LENGTH]; - char packet_recv[MAX_PACKET_LENGTH]; -static int test_ctlr (int devnum, int hw_addr) -{ - int res = -1; - int length; - int l; - - ether_post_init (devnum, hw_addr); - - for (l = MAX_PACKET_LENGTH; l >= MIN_PACKET_LENGTH; - l -= PACKET_INCR) { - packet_fill (packet_send, l); - - ether_post_send (devnum, hw_addr, packet_send, l); - - length = ether_post_recv (devnum, hw_addr, packet_recv, - sizeof (packet_recv)); - - if (length != l || packet_check (packet_recv, length) < 0) { - goto Done; - } - } - - res = 0; - -Done: - - ether_post_halt (devnum, hw_addr); - - if (res != 0) { - post_log ("EMAC%d test failed\n", devnum); - } - - return res; -} - -int ether_post_test (int flags) -{ - int res = 0; - int i; - - /* Allocate tx & rx packet buffers */ - tx_buf = malloc (PKTSIZE_ALIGN + CONFIG_SYS_CACHELINE_SIZE); - rx_buf = malloc (PKTSIZE_ALIGN + CONFIG_SYS_CACHELINE_SIZE); - - if (!tx_buf || !rx_buf) { - printf ("Failed to allocate packet buffers\n"); - res = -1; - goto out_free; - } - - for (i = 0; i < LAST_EMAC_NUM; i++) { - if (test_ctlr (i, i*0x100)) - res = -1; - } - -out_free: - free (tx_buf); - free (rx_buf); - - return res; -} - -#endif /* CONFIG_POST & CONFIG_SYS_POST_ETHER */ diff --git a/post/cpu/ppc4xx/fpu.c b/post/cpu/ppc4xx/fpu.c deleted file mode 100644 index 51e53ff2c8..0000000000 --- a/post/cpu/ppc4xx/fpu.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * (C) Copyright 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Author: Sergei Poselenov - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -#if defined(CONFIG_440EP) || \ - defined(CONFIG_440EPX) - -#include -#include - - -int fpu_status(void) -{ - if (mfspr(SPRN_CCR0) & CCR0_DAPUIB) - return 0; /* Disabled */ - else - return 1; /* Enabled */ -} - - -void fpu_disable(void) -{ - mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) | CCR0_DAPUIB); - mtmsr(mfmsr() & ~MSR_FP); -} - - -void fpu_enable(void) -{ - mtspr(SPRN_CCR0, mfspr(SPRN_CCR0) & ~CCR0_DAPUIB); - mtmsr(mfmsr() | MSR_FP); -} - -#endif diff --git a/post/cpu/ppc4xx/ocm.c b/post/cpu/ppc4xx/ocm.c deleted file mode 100644 index bbf2d9a8ee..0000000000 --- a/post/cpu/ppc4xx/ocm.c +++ /dev/null @@ -1,73 +0,0 @@ -/* - * (C) Copyright 2008 Ilya Yanok, EmCraft Systems, yanok@emcraft.com - * - * Developed for DENX Software Engineering GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include - -/* - * This test attempts to verify on-chip memory (OCM). Result is written - * to the scratch register and if test succeed it won't be run till next - * power on. - */ - -#include - -#include - -DECLARE_GLOBAL_DATA_PTR; - -#define OCM_TEST_PATTERN1 0x55555555 -#define OCM_TEST_PATTERN2 0xAAAAAAAA - -#if CONFIG_POST & CONFIG_SYS_POST_OCM - -static uint ocm_status_read(void) -{ - return in_be32((void *)CONFIG_SYS_OCM_STATUS_ADDR) & - CONFIG_SYS_OCM_STATUS_MASK; -} - -static void ocm_status_write(uint value) -{ - out_be32((void *)CONFIG_SYS_OCM_STATUS_ADDR, value | - (in_be32((void *)CONFIG_SYS_OCM_STATUS_ADDR) & - ~CONFIG_SYS_OCM_STATUS_MASK)); -} - -static inline int ocm_test_word(uint value, uint *address) -{ - uint read_value; - - *address = value; - sync(); - read_value = *address; - - return (read_value != value); -} - -int ocm_post_test(int flags) -{ - uint old_value; - int ret = 0; - uint *address = (uint*)CONFIG_SYS_OCM_BASE; - - if (ocm_status_read() == CONFIG_SYS_OCM_STATUS_OK) - return 0; - for (; address < (uint*)(CONFIG_SYS_OCM_BASE + CONFIG_SYS_OCM_SIZE); address++) { - old_value = *address; - if (ocm_test_word(OCM_TEST_PATTERN1, address) || - ocm_test_word(OCM_TEST_PATTERN2, address)) { - ret = 1; - *address = old_value; - printf("OCM POST failed at %p!\n", address); - break; - } - *address = old_value; - } - ocm_status_write(ret ? CONFIG_SYS_OCM_STATUS_FAIL : CONFIG_SYS_OCM_STATUS_OK); - return ret; -} -#endif /* CONFIG_POST & CONFIG_SYS_POST_OCM */ diff --git a/post/cpu/ppc4xx/spr.c b/post/cpu/ppc4xx/spr.c deleted file mode 100644 index 9a3cdb3cf8..0000000000 --- a/post/cpu/ppc4xx/spr.c +++ /dev/null @@ -1,184 +0,0 @@ -/* - * (C) Copyright 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Author: Igor Lisitsin - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -/* - * SPR test - * - * The test checks the contents of Special Purpose Registers (SPR) listed - * in the spr_test_list array below. - * Each SPR value is read using mfspr instruction, some bits are masked - * according to the table and the resulting value is compared to the - * corresponding table value. - */ - -#include - -#if CONFIG_POST & CONFIG_SYS_POST_SPR - -#include - -#ifdef CONFIG_4xx_DCACHE -#include - -DECLARE_GLOBAL_DATA_PTR; -#endif - -static struct { - int number; - char * name; - unsigned long mask; - unsigned long value; -} spr_test_list [] = { - /* Standard Special-Purpose Registers */ - - {0x001, "XER", 0x00000000, 0x00000000}, - {0x008, "LR", 0x00000000, 0x00000000}, - {0x009, "CTR", 0x00000000, 0x00000000}, - {0x016, "DEC", 0x00000000, 0x00000000}, - {0x01a, "SRR0", 0x00000000, 0x00000000}, - {0x01b, "SRR1", 0x00000000, 0x00000000}, - {0x110, "SPRG0", 0x00000000, 0x00000000}, - {0x111, "SPRG1", 0x00000000, 0x00000000}, - {0x112, "SPRG2", 0x00000000, 0x00000000}, - {0x113, "SPRG3", 0x00000000, 0x00000000}, - {0x11f, "PVR", 0x00000000, 0x00000000}, - - /* Additional Special-Purpose Registers. - * The values must match the initialization - * values from arch/powerpc/cpu/ppc4xx/start.S - */ - {0x30, "PID", 0x00000000, 0x00000000}, - {0x3a, "CSRR0", 0x00000000, 0x00000000}, - {0x3b, "CSRR1", 0x00000000, 0x00000000}, - {0x3d, "DEAR", 0x00000000, 0x00000000}, - {0x3e, "ESR", 0x00000000, 0x00000000}, -#ifdef CONFIG_440 - {0x3f, "IVPR", 0xffff0000, 0x00000000}, -#endif - {0x100, "USPRG0", 0x00000000, 0x00000000}, - {0x104, "SPRG4", 0x00000000, 0x00000000}, - {0x105, "SPRG5", 0x00000000, 0x00000000}, - {0x106, "SPRG6", 0x00000000, 0x00000000}, - {0x107, "SPRG7", 0x00000000, 0x00000000}, - {0x10c, "TBL", 0x00000000, 0x00000000}, - {0x10d, "TBU", 0x00000000, 0x00000000}, -#ifdef CONFIG_440 - {0x11e, "PIR", 0x0000000f, 0x00000000}, -#endif - {0x130, "DBSR", 0x00000000, 0x00000000}, - {0x134, "DBCR0", 0x00000000, 0x00000000}, - {0x135, "DBCR1", 0x00000000, 0x00000000}, - {0x136, "DBCR2", 0x00000000, 0x00000000}, - {0x138, "IAC1", 0x00000000, 0x00000000}, - {0x139, "IAC2", 0x00000000, 0x00000000}, - {0x13a, "IAC3", 0x00000000, 0x00000000}, - {0x13b, "IAC4", 0x00000000, 0x00000000}, - {0x13c, "DAC1", 0x00000000, 0x00000000}, - {0x13d, "DAC2", 0x00000000, 0x00000000}, - {0x13e, "DVC1", 0x00000000, 0x00000000}, - {0x13f, "DVC2", 0x00000000, 0x00000000}, - {0x150, "TSR", 0x00000000, 0x00000000}, - {0x154, "TCR", 0x00000000, 0x00000000}, -#ifdef CONFIG_440 - {0x190, "IVOR0", 0x0000fff0, 0x00000100}, - {0x191, "IVOR1", 0x0000fff0, 0x00000200}, - {0x192, "IVOR2", 0x0000fff0, 0x00000300}, - {0x193, "IVOR3", 0x0000fff0, 0x00000400}, - {0x194, "IVOR4", 0x0000fff0, 0x00000500}, - {0x195, "IVOR5", 0x0000fff0, 0x00000600}, - {0x196, "IVOR6", 0x0000fff0, 0x00000700}, - {0x197, "IVOR7", 0x0000fff0, 0x00000800}, - {0x198, "IVOR8", 0x0000fff0, 0x00000c00}, - {0x199, "IVOR9", 0x00000000, 0x00000000}, - {0x19a, "IVOR10", 0x0000fff0, 0x00000900}, - {0x19b, "IVOR11", 0x00000000, 0x00000000}, - {0x19c, "IVOR12", 0x00000000, 0x00000000}, - {0x19d, "IVOR13", 0x0000fff0, 0x00001300}, - {0x19e, "IVOR14", 0x0000fff0, 0x00001400}, - {0x19f, "IVOR15", 0x0000fff0, 0x00002000}, -#endif - {0x23a, "MCSRR0", 0x00000000, 0x00000000}, - {0x23b, "MCSRR1", 0x00000000, 0x00000000}, - {0x23c, "MCSR", 0x00000000, 0x00000000}, - {0x370, "INV0", 0x00000000, 0x00000000}, - {0x371, "INV1", 0x00000000, 0x00000000}, - {0x372, "INV2", 0x00000000, 0x00000000}, - {0x373, "INV3", 0x00000000, 0x00000000}, - {0x374, "ITV0", 0x00000000, 0x00000000}, - {0x375, "ITV1", 0x00000000, 0x00000000}, - {0x376, "ITV2", 0x00000000, 0x00000000}, - {0x377, "ITV3", 0x00000000, 0x00000000}, - {0x378, "CCR1", 0x00000000, 0x00000000}, - {0x390, "DNV0", 0x00000000, 0x00000000}, - {0x391, "DNV1", 0x00000000, 0x00000000}, - {0x392, "DNV2", 0x00000000, 0x00000000}, - {0x393, "DNV3", 0x00000000, 0x00000000}, - {0x394, "DTV0", 0x00000000, 0x00000000}, - {0x395, "DTV1", 0x00000000, 0x00000000}, - {0x396, "DTV2", 0x00000000, 0x00000000}, - {0x397, "DTV3", 0x00000000, 0x00000000}, -#ifdef CONFIG_440 - {0x398, "DVLIM", 0x0fc1f83f, 0x0001f800}, - {0x399, "IVLIM", 0x0fc1f83f, 0x0001f800}, -#endif - {0x39b, "RSTCFG", 0x00000000, 0x00000000}, - {0x39c, "DCDBTRL", 0x00000000, 0x00000000}, - {0x39d, "DCDBTRH", 0x00000000, 0x00000000}, - {0x39e, "ICDBTRL", 0x00000000, 0x00000000}, - {0x39f, "ICDBTRH", 0x00000000, 0x00000000}, - {0x3b2, "MMUCR", 0x00000000, 0x00000000}, - {0x3b3, "CCR0", 0x00000000, 0x00000000}, - {0x3d3, "ICDBDR", 0x00000000, 0x00000000}, - {0x3f3, "DBDR", 0x00000000, 0x00000000}, -}; - -static int spr_test_list_size = ARRAY_SIZE(spr_test_list); - -int spr_post_test (int flags) -{ - int ret = 0; - int i; - - unsigned long code[] = { - 0x7c6002a6, /* mfspr r3,SPR */ - 0x4e800020 /* blr */ - }; - unsigned long (*get_spr) (void) = (void *) code; - -#ifdef CONFIG_4xx_DCACHE - /* disable cache */ - change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE); -#endif - for (i = 0; i < spr_test_list_size; i++) { - int num = spr_test_list[i].number; - - /* mfspr r3,num */ - code[0] = 0x7c6002a6 | ((num & 0x1F) << 16) | ((num & 0x3E0) << 6); - - asm volatile ("isync"); - - if ((get_spr () & spr_test_list[i].mask) != - (spr_test_list[i].value & spr_test_list[i].mask)) { - post_log ("The value of %s special register " - "is incorrect: 0x%08X\n", - spr_test_list[i].name, get_spr ()); - ret = -1; - } - } -#ifdef CONFIG_4xx_DCACHE - /* enable cache */ - change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0); -#endif - - return ret; -} - -#endif /* CONFIG_POST & CONFIG_SYS_POST_SPR */ diff --git a/post/cpu/ppc4xx/uart.c b/post/cpu/ppc4xx/uart.c deleted file mode 100644 index 545b054c2b..0000000000 --- a/post/cpu/ppc4xx/uart.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * (C) Copyright 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Author: Igor Lisitsin - * - * Copyright 2010, Stefan Roese, DENX Software Engineering, sr@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -/* - * UART test - * - * The controllers are configured to loopback mode and several - * characters are transmitted. - */ - -#include - -#if CONFIG_POST & CONFIG_SYS_POST_UART - -/* - * This table defines the UART's that should be tested and can - * be overridden in the board config file - */ -#ifndef CONFIG_SYS_POST_UART_TABLE -#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \ - CONFIG_SYS_NS16550_COM2, CONFIG_SYS_NS16550_COM3, \ - CONFIG_SYS_NS16550_COM4 } -#endif - -DECLARE_GLOBAL_DATA_PTR; - -static int test_ctlr (struct NS16550 *com_port, int index) -{ - int res = -1; - char test_str[] = "*** UART Test String ***\r\n"; - int i; - int divisor; - - divisor = (get_serial_clock() + (gd->baudrate * (16 / 2))) / - (16 * gd->baudrate); - NS16550_init(com_port, divisor); - - /* - * Set internal loopback mode in UART - */ - out_8(&com_port->mcr, in_8(&com_port->mcr) | UART_MCR_LOOP); - - /* Reset FIFOs */ - out_8(&com_port->fcr, UART_FCR_RXSR | UART_FCR_TXSR); - udelay(100); - - /* Flush RX-FIFO */ - while (NS16550_tstc(com_port)) - NS16550_getc(com_port); - - for (i = 0; i < sizeof (test_str) - 1; i++) { - NS16550_putc(com_port, test_str[i]); - if (NS16550_getc(com_port) != test_str[i]) - goto done; - } - res = 0; -done: - if (res) - post_log ("uart%d test failed\n", index); - - return res; -} - -int uart_post_test (int flags) -{ - int i, res = 0; - static unsigned long base[] = CONFIG_SYS_POST_UART_TABLE; - - for (i = 0; i < ARRAY_SIZE(base); i++) { - if (test_ctlr((struct NS16550 *)base[i], i)) - res = -1; - } - serial_reinit_all (); - - return res; -} - -#endif /* CONFIG_POST & CONFIG_SYS_POST_UART */ diff --git a/post/cpu/ppc4xx/watchdog.c b/post/cpu/ppc4xx/watchdog.c deleted file mode 100644 index 24e80939a9..0000000000 --- a/post/cpu/ppc4xx/watchdog.c +++ /dev/null @@ -1,52 +0,0 @@ -/* - * (C) Copyright 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Author: Igor Lisitsin - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -/* - * Watchdog test - * - * The test verifies the watchdog timer operation. - * On the first iteration, the test routine disables interrupts and - * makes a 10-second delay. If the system does not reboot during this delay, - * the watchdog timer is not operational and the test fails. If the system - * reboots, on the second iteration the test routine reports a success. - */ - -#include - -#if CONFIG_POST & CONFIG_SYS_POST_WATCHDOG - -#include - -int watchdog_post_test (int flags) -{ - if (flags & POST_REBOOT) { - /* Test passed */ - return 0; - } - else { - /* 10-second delay */ - int ints = disable_interrupts (); - ulong base = post_time_ms (0); - - while (post_time_ms (base) < 10000) - ; - if (ints) - enable_interrupts (); - - /* - * If we have reached this point, the watchdog timer - * does not work - */ - return -1; - } -} - -#endif /* CONFIG_POST & CONFIG_SYS_POST_WATCHDOG */ diff --git a/post/lib_powerpc/cpu.c b/post/lib_powerpc/cpu.c index 63a861e4dd..915eb0a764 100644 --- a/post/lib_powerpc/cpu.c +++ b/post/lib_powerpc/cpu.c @@ -66,10 +66,6 @@ int cpu_post_test (int flags) WATCHDOG_RESET(); if (ic) icache_disable (); -#ifdef CONFIG_4xx_DCACHE - /* disable cache */ - change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, TLB_WORD2_I_ENABLE); -#endif if (ret == 0) ret = cpu_post_test_cmp (); @@ -118,10 +114,6 @@ int cpu_post_test (int flags) if (ic) icache_enable (); -#ifdef CONFIG_4xx_DCACHE - /* enable cache */ - change_tlb(gd->bd->bi_memstart, gd->bd->bi_memsize, 0); -#endif WATCHDOG_RESET(); -- cgit